Audited Supplier
Order No.: CTH3 ECT-000S1
Specification: EtherCAT slave module, can be extended up to 8 CTH300 series IO modules
Physical properties | |
Size(W×H×D) | 34×115×100mm mm |
Power loss | |
Rated input voltage | 24V DC |
Input voltage range | 20.4V~28.8V DC |
Input current | 0.8A |
Bus power supply voltage | +5V DC |
Bus supply current | 1.6A |
Isolation | External power supply is isolated from system power supply |
Power protection | The power supply end provides the reverse connection protection function and the surge absorption function |
| LED Indicator light characteristics | |
| 24V power indicator light (green) | On: 24VDC power supply normal, off: No 24VDC power supply |
| SF indicator light (red) | ON=Expansion I/O bus failure or EtherCAT module failure, inconsistent hardware configuration OFF=No error |
| BF indicator light (red) | ON=EtherCAT bus communication failure OFF=No error |
| LINK indicator light (green) (Slave station status indicator light) | On: Normal operation (8) Flashing: Pre operation (2), safe operation (4) (see Note 1) Off: No connection (0), initialization (1) |
| RJ45 port indicator light (green) | On: Connected to other EtherCAT interfaces Off: Not connected to other EtherCAT interfaces Flashing: Communicating with other EtherCAT interfaces |
The functional characteristics of ECT-00
| Functional categories | Function items | describe |
| HW Config | Codesys or other third-party configurations | The added ECT-00 module supports expansion of 8 slots |
| Extended functionality | Extended functionality | Allow expansion of 8 I/O modules (digital module, analog module, temperature module, HSC, HSP module, excluding CAN module) |
| Communication function | Bus interface | Provide expansion module interface and support CTH300 PLC custom 55MHZ bus protocol |
| EtherCAT interface | Provide EtherCAT communication interface and support CANopen over EtherCAT (CoE) | |
| Isolation function | Power isolation | solation between external power supply and system power supply |
| Protection function | Power protection | The power supply terminal provides reverse protection function and surge absorption function |
| EtherCAT communication | |
| communication interface | 1 dual RJ45 port |
| Baud rate | 100Mbps |
| Protocol type | CANopen over EtherCAT (CoE) |
| Support PDO services | |
| Support SDO services | |
| Support EtherCAT state machine commands | |
| Supporting third-party EtherCAT master stations | |
| The longest communication distance between stations | 100m (100BASE-TX) |
| quarantine | Communication port isolation |
ECT-00 Power Interface Definition| 4-digit detachable terminal | Tag number | signal | Signal Definition |
 | 1 | L+ | 24V+ |
| 2 | M | 24V- | |
| 3 |  | earth | |
| 4 | -- | -- |
| Dual RJ45 Ethernet ports | Tag number | signal | Signal Definition |
 | 1 | TX+ | Data sending positive end |
| 2 | TX- | Negative end of data transmission | |
| 3 | RX+ | Data receiving positive end | |
| 4 | -- | -- | |
| 5 | -- | -- | |
| 6 | RX- | Negative end of data reception | |
| 7 | -- | -- | |
| 8 | -- | -- | |
| Connector housing | PE | Housing grounding |
Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.
Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.
Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.
Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.
Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.
Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.
