Thin Film Ntc Thermistor Sensor 50mm 25mm Length

Price $1.00 Compare
Min Order 500 Pieces
Shipping From Anhui, China
Popularity 397 people viewed
Quantity
+-
 

Hefei Jingpu Sensor Technology Co., Ltd.

VIP   Audited Supplier 8 years
Profile Certified by SGS/BV
MF5A-6
Sensitive Resistor
Protective Resistor, Temperature Measuring
SMD Resistor
Carbon Film Resistor
Packaging
Thermal Resistor
Min:500PCS/Pack
Square
Non-Linear Scale
Temperature Measurement
45mm
0.0001g/PC
Ntc Chip
UL Certify
Battery System
J. P. Sensor
Neutral Packaging
'W' 4.50mm or 3.60mm
Hefei, Anhui, China
9025191010
Product Description
Thin Film NTC Thermistor Sensor 50mm 25mm length 

 
Product Description

 Thin film NTC thermistor sensor 50mm 25mm length is made of NTC chip, insulation film and lead wire. It is applied in units that requires fast response time, tight measuring space, and suitable for surface temperature measuring. It's widely used for temperature measurement in the BWM system.


Product features:
  Thin film, miniature designed, high precision, quick response and good stability.
 
Product Parameters
3-1Rated zero-power resistance R25ºC10kΩ ±1% (at 25ºC)
3-2B value *The B value is calculated using the zero-power resistance values
measured at 25ºC and 85ºC
3435K ±1%
3-3Dissipation factor.Approx. 0.7 mW/ºC (in air)
3-4Thermal time constantApprox 5.0s (in air)
3-5Maximum power rating3.5mW (at 25ºC)
3-6Category temperature range-40~100ºC
Insulation resistance: insulation resistance shall be more than 100 MΩ which is measured at DC 100V between film area and terminals.
 
Detailed Photos

Additional Information

Climatic test
1) Dry Heat
   After the test samples were exposed in air at 90±1ºC for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
2) Damp heat
   After the test samples were exposed in the humidity of 95% at 40 ±2ºC for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
3) Cold
   After the test samples were exposed in air at -30 ±1ºC for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
4) Loading
   After DC 1mA current was applied to the test samples in the temperature of 40 ±2ºC and the humidity of 95% for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
5) Change of temperature
   One cycle of the change of temperature shall be carried out in the order of the following conditions.
Room ambient temperature. (Initial value) At -25 ±3ºC, for 30 minutes.
Room ambient temperature, for 3 minutes.
After the 100 cycles of this process, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value. 

 
Application:
  Duplicator, battery pack, electronic calendar, thermometer, temperature instrument etc.
 
Packaging & Shipping

Packing: 500pcs /polybag
Package label: English version

Technical details

R-T Table: R25=10kΩ±1%, B25/85=3435K±1%


You may also like these products:




 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA