Audited Supplier
500kg/h-20000kg/h
CE, ISO
New
Customized
Ss304/Ss316
Preparation Machinery
Liquid
Normal Precision
Computerized
1 Year
Tianlong
Normal Export Package
0.5kg/h-10kg/h
Wenzhou, China
Product Description
| Type | SJM2-1200 | SJM2-1600 | SJM2-2000 | SJM2-2500 |
| Evaporation Kg/h | 800 | 1000 | 1200 | 1600 |
| Inlet material content % | 11.5~12 | 11.5~12 | 11.5~12 | 11.5~12 |
| Outlet material content % | 45~48 | 45~48 | 45~48 | 45~48 |
| Steam pressure MPa | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 |
| Steam consumption kg/h | 620 | 835 | 1020 | 1150 |
| Evaporation temp. first-effect C | 70 | 70 | 70 | 70 |
| second-effect C | 45 | 45 | 45 | 45 |
| Heat temp. first-effect C | 80 | 80 | 80 | 80 |
| second-effect C | 70 | 70 | 70 | 70 |
| Sterilizing temperature C | 86~94 | 86~94 | 86~94 | 86~94 |
| Cooling water consumption T/H | 9 | 12 | 15 | 18 |
| Motor power KW | 18 | 25.5 | 25.5 | 31.5 |
| Total dimensions | 4.5x2.3x7.6 | 4.5x2.4x8 | 4.5x2.4x8.5 | 4.7x2.5x8.5 |
Single effect,dual effect and tri-effect falling film evaporator units are applicable for concentration of materials such as milk,fruit juice,biochemical industry,pharmacy,condiment and food additives etc .
system composition
heat,separator,condenser,pre-heater,vacuum system,high pressure pump,electrical appliance meter, control cabinet,work bench etc.
Product characteristics
1. The remaining time of material in the heating tube is very short, which is especially applicable for the concentration of heat sensitive materials,Continuous material feeding and continous material discharge are available .
2. Low evaporation temperature . Effect no. and evaporation temperature can be selected according to customer requirements .
3. Special heating evaporator top spraying film distribution mechanism with equal film forming .
4. The condenser has special structure , large heat transmission coefficient and high effect .
5. Adopt injection high pressure pump with prominent energy saving effect .
6. Self control and manual control can be adopted according to customer requirements .
