Audited Supplier
Note: the sample price is subject to our discussion and final confirmation.
Note: the sample price is subject to our discussion and final confirmation.Introduction of Air Jack for Lifting Cars with Auto Lift
Definition of pneumatic jack for lifting car for 3ton use
A new type of lifting device that uses compressed gas as power, liquid pressurization and telescopic pneumatic cylinder. It has the characteristics of exquisite design, small size, light weight, easy operation, time saving, labor saving, and large tonnage. It is widely used for mobility lifting, especially for the repair industry of transportation industry such as automobiles and tractors.
Product Features of pneumatic jack for lifting car for 3ton use
In the past, people used ordinary hand pressure jacks to have many deficiencies. This jack fundamentally solved the inadequacies of ordinary jacks.
Labor-saving: Labor intensity is only to push the jack to the right working position, and the switch can be used to achieve the purpose of lifting.
Time saving: When the general transport vehicle carries 120 tons, the wheel can be raised to a suitable height in about 2 minutes.
Safety: Instead of climbing to work under the car, the staff can control the switch outside the car body to achieve the purpose of lifting, and avoid the danger of personnel.
Clean: repairing the car itself is a dirty job, this product overcomes the dirty image of the staff in the wind, rain, snow days.
Cost saving: This product has good durability and is 20 times of ordinary jack. The company maintains the product for lifelong maintenance and three bags, which reduces your repair cost.
Basic operation of pneumatic jack for lifting car for 3ton use
1. Adjust the grip to 90° when not in use and save floor space.
2. When moving the jack, adjust the grip to 45°, and the person can push and pull the jack.
3. When the working position is aligned, adjust the grip to the horizontal direction, and adjust the position of the jack back and forth.
4. Connect the air source when lifting, the air pump should be above 0.6 cubic meters, and the pipe diameter should be above 8mm.
5. Hold the knife lever lever and adjust the angle of the grip.
6. Adjust the three gear positions on the switch as needed.
7. The long top should be placed every time to avoid damage to the cylinder caused by direct contact between the body and the cylinder.
8. Filling port should be filled with aviation air pressure oil. The amount of fuel should be equal to the level of the fuel tank when the jack is flat.
Principle of pneumatic jack for lifting car for 3ton use
It uses compressed air as the power to drive the air pump to work, pumping the high-pressure oil into the pneumatic jack, so that the jack can be lifted to achieve the purpose of lifting. The pneumatic jack is lifted and lowered by controlling the oil return valve. The mechanism is divided into five parts: air pressure jack, air pump, wheel frame, pneumatic control and traction. The pneumatic jack part and the air pump part are of split structure. The valve plate is connected by single air pipe bolt type, the upper handle tube of the traction part and the lower part. The stem tube is detachable. It has the characteristics of exquisite design, small size, light weight, easy operation, time saving, labor saving, large lifting tonnage, etc. It is widely used for mobility lifting, especially suitable for the repair industry of transportation industry such as automobile and tractor.
Quick specification of the HY-AJ55D Triple Bag Air Jack Pneumatic Jack
HY-AJ55D
| Capacity | 3000KG(Double/triple balloon) |
| Min. height | 150mm |
| Max height | 400mm |
| Working temperature | -20degrees to 30degrees. |
| Net weight | 16kg |
| Gross weight | 18kg |
| Packing dimension | As per |
| Pull rod | Without, but portable. |
| Work Range | Mainly for cars |
| Function | Mainly for car repair and body shops. |
Details show of our HY-AJ55D Triple Bag Air Jack Pneumatic Jack
Shipment package for our HY-AJ55D Triple Bag Air Jack Pneumatic Jack
Certificate of our product and company
Our Team is serving you at any time
Send us inquiry for more info about HY-AJ55D Triple Bag Air Jack Pneumatic Jack
Looking forward to your kind inquiry and hope to establish business relationships with you in near future!
Without communication, there is no relationship; without respect, there is no love; without trust, there is no reason to continue!
Contact Person: Lisa Lee
Manufacturer: Zouping Hongyuan Eco-Friendly Mechanical Technology Co., Ltd.
Without communication, there is no relationship;
without respect, there is no love;
without trust, there is no reason to continue!
Wish the best to your family!
FAQ
Q 1: Are you Manufacturer or Trading company?
A:We are a professional manufacturer with our own export department. So you can get best price from us.
Q 2: Where is your company located? How can I visit there?
A:Our company is located in Binzhou, near JINAN airport and ZIBO train station. All clients, from home and abroad, are warmly welcomed to visit us.
Q 3: What is your terms of delivery?
A: Normally our quotation is under FOB Qingdao, but we also accept EXW, FOB(other seaports), CFR, CIF, DDU and so on.
Q 4: What is your terms of payment?
A: By T/T, 40% as deposit for production, and 60% balance before delivery. We'll show you the photos of the products and packages before you pay the balance. Other payment terms are as negotiated. For small amount order, we also accept WU, Paypal, MoneyGram and so on.
Q 5: What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton, and wooden box as required.
Q 6: How about your delivery time?
A: Generally, the goods will be ready within 7 to 10 days after receiving deposit for standard goods. Some kinds are even in stock. If your voltage is different from 380V/3PH/50Hz, the delivery time will be a little longer for custom-made motors or electric components.
Q 7: Can you produce according to the technical drawings?
A: Yes, we can produce by your technical drawings or requirements. We also can make drawings for you.
Q 8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit;
A2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q 9: How about the quality of the products?
A:With the advanced machines, strong and professional R&D team and material sources, our products are excellent in performance and craftsmanship.
Why Choose Us
1.More than 10-year manufacturing experience involved in this industry, and 10-year rich export experience
2.Superb unique technology and Automatic production line.
3.Large order can be placed.
4.Advanced equipment and exquisite workmanship.
5.Durable and reliable
6.Professional pre-sales and after-sales service
