Audited Supplier
Main features of surface grinding machine
1>Casting party is made of M Hanna high strength cast iron, which is treated by special annealing and quaternary treatment with high precision and good rigidity.
2>Left rail is V type rail,right rial is flat rail,the front and back are double V type slideway, and process with the precision shovel,and have advantage of smooth and wearable,M250 type slideway with special resin, durable, good precision, flexible operation and portability
3>Spindle motor without vibration and low noise
4>Sleeve type grinding head spindle with high precision,using ultra precision P4 grade 4 precision angle of rolling bearings, through strict measurement after preloading, assembled in the room temperature, and with the labyrinth completely waterproof design, to ensure that the service life of the bearing surface, and precision grinding.
5>We can install digital display, electric automatic and frequency conversion equipment according to different requirements of customers
Standard configuration
1>Encryption of pure copper permanent magnetic chuck,
2>water tank and a water cooling system,
3>wheel flange and grinding wheel,
4>grinding wheel flange installation tools,
5>grinding wheel holder,
6>grinding wheel balancer,
7>balance wheel shaft,
8>a horizontal adjusting bolt and machine foot toolbox
9>practical tools necessary.
Main parameter
Work table | Size(L*W) | Mm | 530X250 | |
| Front and back stroke | Mm | 270 | ||
| Left and right stroke | Mm | 560 | ||
| Left and right movement speed(stepless) | M/min | 3--20 | ||
| Front and back feeding | Continuous (stepless speed regulation) | Mm | 50--500 | |
| Intermittent (stepless speed regulation) | Mm | 1--20 | ||
| Worktable type T groove (groove number * groove width) | Mm | 1X14 | ||
Grinding head | Maximum distance from center line of grinding wheel to working table | Mm | 460 | |
| Mm/min | ||||
Vertical feed handwheel feed | Handwheel per turn | Mm | 0.15 | |
| Handwheel per cell | Mm | 0.01 | ||
Front and rear feed handwheel feed | Handwheel per turn | Mm | 3 | |
| Handwheel per cell | Mm | 0.02 | ||
| Grinding wheel shaft speed | R/min | 2850 | ||
| Grinding wheel size (outer diameter * width * internal diameter) | Mm | Φ200X16XΦ31.75/32 | ||
| Hydraulic system | Spindle motor | Kw | 1.5 | |
| Working pressure | Mpa | 3 | ||
| Tank capacity | L | 60 | ||
| Working accuracy | The surface of the base of parallelism | Mm | 300:0.005 | |
| Surface roughness | Μm | Ra0.32 | ||
| Weight machine | Net weight | Kg | 1050 | |
| Gross weight | Kg | 1150 | ||
| Motor power | Kw | 2.94 | ||
| Grinding head motor power | Kw | 1.5 | ||
| Size of machine(L*W*H) | Mm | 1760X1380X1850 | ||
| Size Of package(L*W*H) | Mm | 1700X1150X1900 | ||
Details please check indmtgroup.en.made-in-china.com Dalian indus machienry technology co.,ltd
INDMT is found as high precision machine manufacturer. We design, produce train and commissioning.
We produce CNC grinding machine for tungsten carbide ring. EDM diamond grinding wheel shaped machine. CNC guide ring turning and grinding machine.
We makes CNC grinding machine for carbide combination roll or high speed steel roll. Specially for rebar finish groove roller. It can help you save roller, increase the amount of steel in the roll.
We manufacture CNC heavy duty turning for carbide combination roll or high speed steel roll or high nickel molybdenum ductile iron roll supplier. CNC heavy duty roll turning lathe, it can remove ribs in the HSS roller. We produce CNC TC ring turning lathe. It will be more efficient than TC ring grinding machine. We also provide CNC turning and grind multi-functional machine. One machine can achieve rough machining and finishing.
We supplies CNC notching and logo marking machine. The machine have more models for selecting. Heavy duty CNC notching and logo marking machine is design for HSS roller and judge diameter of roller or groove.
have spare parts and CNC notching insert and CNC turning insert etc. PCD notching insert for TC RING, PCBN notching for HSS roller. TC notching insert for HSS or for high nickel molybdenum ductile iron roll. CBN turning insert for HSS roller or for iron steel roller . PCD turning insert for TC roller.
provide technical advice and maintenance and service. We accept the design the production of machine tools according to customer needs.
It is our pleasure to receive your advice or inquire. If you need more information pls visit our website indmtgroup.en.made-in-china.com
1.How can I choose the most suitable CNC Roller Notching machines ?
A: Please tell me your roller size , it is better to send us the roller's drawing.we can choose the most suitable CNC roller notching machine model for you.
2.What is your trade terms?
A : FOB, CFR and CIF all acceptable.
3.What's the Payment Terms ?
A : T/T ,30% advance payment after order ,70% balance payment before shipment ;
Irrevocable LC payment at sight .
4.What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
5.How long is the production time
A:The production time for Non-standard CNC machine is 30-45 days
