Audited Supplier
backhoe loader
One Year
Support
ISO, CE
New
1-2t
Hydraulic
Two Direction
Wheeled
Medium-sized Loader
Shandong, China
Customer Demanded
Backhoe Loader
Indoor Flooring
MINGYU
Nude Packing
China
842951000
Product Description
| Model | HT06-10T |
| Dimensions (mm) | 5000X1150X2800 |
| Wheel base (mm) | 1618 |
| Wheel tread(mm) | 840 |
| Min. ground clearance (mm) | 175 |
| performance parameters | |
| System pressure (MPa) | 16 |
| Machine weight (Kg) | 1800 |
| Max. speed (Km/h) | 20 |
| Max. climbing capacity (°) | 25 |
| Min. turning radius (mm) | 2800 |
| Digging parameters | |
| Max. digging depth (mm) | 2400 |
| Dig unloading height (mm) | 2600 |
| Max. digging radius (mm) | 2500 |
| Bucket width (mm) | 400 |
| Bucket capacity (m3) | 0.08 |
| max. digging height (mm) | 3640 |
| Maximum digging force (kN) | 10 |
| Rotary Angle of excavator (°) | 120 |
| Loading parameters | |
| Max. unloading height (mm) | 2000 |
| Max. unloading distance (mm) | 1000 |
| Bucket width (mm) | 1150 |
| Bucket capacity (m³) | 0.2 |
| Max. loading lifting height (mm) | 3000 |
| Max. breakout force (kN) | 16 |
| Forward shovel action time (S) | 12 |
| Engine | |
| Model | D1105-EF02 |
| Type | lnline Direct lnject,4 strokes |
| Rate power (KW) | 18.2 |
| Rate speed (r/min) | 3000 |
| Cylinders-inside diameter | 3 |
| Transmission system | |
| Gearbox | Fixed shaft power shift |
| Number of gear | 2 first/ 2 after |
| Steering system | |
| Type | Hinged full hydraulic steering |
| Steering Angle (°) | 33 |
| Bridge | |
| Type | SPECIAL USE |
| Tire | |
| Front wheel pressure (kPa) | 250 |
| Rear wheel pressure (kPa) | 250 |
| Crane brake | Oil brake drum brake |
| Oil amount | |
| Fuel tank (L) | 30 |
| Hydraulic tank (L) | 30 |
| Model | HT08-12 | |
| Dimensions (mm) | 5100*1350*2580 | |
| Wheelbase (mm) | 1910 | |
| wheel tread(mm) | 1100 | |
| Min. ground clearance (mm) | 250 | |
| performance parameters | ||
| System pressure (MPa) | 16 | |
| Machine weight (Kg) | 2500 | |
| Max. speed (Km/h) | 20 | |
| Max. climbing capacity (°) | 25 | |
| Min. turning radius (mm) | 3000 | |
| Digging parameters | ||
| Max. digging depth (mm) | 1500 | |
| Dig unloading height (mm) | 1500 | |
| Max. digging radius (mm) | 2000 | |
| Bucket width (mm) | 350 | |
| Bucket capacity (m3) | 0.08 | |
| max. digging height (mm) | 2600 | |
| Maximum digging force (kN) | 25 | |
| Rotary Angle of excavator (°) | 180 | |
Loading parameters | ||
| Max. unloading height (mm) | 2200 | |
| Max. unloading distance (mm) | 800 | |
| Bucket width (mm) | 1300 | |
| Bucket capacity (m³) | 0.4 | |
| Max. loading lifting height (mm) | 3000 | |
| Max. breakout force (kN) | 28 | |
| Forward shovel action time (S) | 12 | |
| Engine | ||
| Model | Yunnei 490 | |
| Type | Turbocharged, 4 strokes | |
| Rate power (KW) | 37 | |
| Rate speed (r/min) | 2400 | |
| Cylinders-inside diameter | 4-90 | |
| Transmission system | ||
| Gearbox | Fixed shaft power shift | |
| Number of gear | 2 first/ 2 after | |
| Hydraulic torque converter | ZL28F | |
| Steering system | ||
| Type | Hinged full hydraulic steering | |
| Steering Angle (°) | 33 | |
Bridge | ||
| Type | Hub reduction | |
| Tire | ||
| Specifications | 825-16 | |
| Front wheel pressure (kPa) | 250 | |
| Rear wheel pressure (kPa) | 250 | |
| Crane brake | Oil brake drum brake | |
| The parking brake | Manul | |
| Oil amount | ||
| Fuel tank (L) | 20 | |
| Hydraulic tank (L) | 20 | |
| Other | ||
| Drive type | Four-wheel drive | |
| Variable speed type | Hydraulic variable speed | |
| Braking distance (mm) | 3000 | |
| Model | HT08-12T | |
| Dimensions (mm) | 4400*1665*2550 | |
| Wheelbase (mm) | 1960 | |
| wheel tread(mm) | 1130 | |
| Min. ground clearance (mm) | 250 | |
| performance parameters | ||
| System pressure (MPa) | 16 | |
| Machine weight (Kg) | 2400 | |
| Max. speed (Km/h) | 25 | |
| Max. climbing capacity (°) | 25 | |
| Min. turning radius (mm) | 3200 | |
| Diggingparameters | ||
| Max. digging depth (mm) | 1450 | |
| Dig unloading height (mm) | 1800 | |
| Max. digging radius (mm) | 2600 | |
| Bucket width (mm) | 400 | |
| Bucket capacity (m3) | 0.08 | |
| max. digging height (mm) | 2300 | |
| Maximum digging force (kN) | 25 | |
| Rotary Angle of excavator (°) | 180 | |
Loading parameters | ||
| Max. unloading height (mm) | 2300 | |
| Max. unloading distance (mm) | 750 | |
| Bucket width (mm) | 1300 | |
| Bucket capacity (m³) | 0.3 | |
| Max. loading lifting height (mm) | 2800 | |
| Max. breakout force (kN) | 36 | |
| Forward shovel action time (S) | 12 | |
| Engine | ||
| Model | Yunnei YN25GB | |
| Type | Turbocharged, 4 strokes | |
| Rate power (KW) | 37 | |
| Rate speed (r/min) | 2400 | |
| Cylinders-inside diameter | 4-90 | |
| Transmission system | ||
| Gearbox | Fixed shaft power shift | |
| Number of gear | 2 first/ 2 after | |
| Hydraulic torque converter | ZL28F | |
| Steering system | ||
| Type | Hinged full hydraulic steering | |
| Steering Angle (°) | 33 | |
Bridge | ||
| Type | Hub reduction | |
| Tire | ||
| Specifications | 10-16.5 | |
| Front wheel pressure (kPa) | 250 | |
| Rear wheel pressure (kPa) | 250 | |
| Crane brake | Oil brake drum brake | |
| The parking brake | Manul | |
| Oil amount | ||
| Fuel tank (L) | 25 | |
| Hydraulic tank (L) | 25 | |
| Other | ||
| Drive type | Four-wheel drive | |
| Variable speed type | Hydraulic variable speed | |
| Braking distance (mm) | 3300 | |
| Model | HT10-20 | |
| Dimensions (mm) | 5500*1750*2650 | |
| Wheelbase (mm) | 2070 | |
| wheel tread(mm) | 1475 | |
| Min. ground clearance (mm) | 250 | |
| performance parameters | ||
| System pressure (MPa) | 16 | |
| Machine weight (Kg) | 3400 | |
| Max. speed (Km/h) | 25 | |
| Max. climbing capacity (°) | 25 | |
| Min. turning radius (mm) | 3500 | |
| Diggingparameters | ||
| Max. digging depth (mm) | 2000 | |
| Dig unloading height (mm) | 1800 | |
| Max. digging radius (mm) | 2700 | |
| Bucket width (mm) | 400 | |
| Bucket capacity (m3) | 0.1 | |
| max. digging height (mm) | 3300 | |
| Maximum digging force (kN) | 25 | |
| Rotary Angle of excavator (°) | 180 | |
Loading parameters | ||
| Max. unloading height (mm) | 2800 | |
| Max. unloading distance (mm) | 800 | |
| Bucket width (mm) | 1800 | |
| Bucket capacity (m³) | 0.5 | |
| Max. loading lifting height (mm) | 3300 | |
| Max. breakout force (kN) | 36 | |
| Forward shovel action time (S) | 12 | |
| Engine | ||
| Model | Yunnei 490 | |
| Type | Turbocharged, 4 strokes | |
| Rate power (KW) | 37 | |
| Rate speed (r/min) | 2400 | |
| Cylinders-inside diameter | 4-90 | |
| Transmission system | ||
| Gearbox | Fixed shaft power shift | |
| Number of gear | 2 first/ 2 after | |
| Hydraulic torque converter | ZL28F | |
| Steering system | ||
| Type | Hinged full hydraulic steering | |
| Steering Angle (°) | 33 | |
Bridge | ||
| Type | Hub reduction | |
| Tire | ||
| Specifications | 20.5-16 | |
| Front wheel pressure (kPa) | 250 | |
| Rear wheel pressure (kPa) | 250 | |
| Crane brake | Oil brake drum brake | |
| The parking brake | Manul | |
| Oil amount | ||
| Fuel tank (L) | 30 | |
| Hydraulic tank (L) | 30 | |
| Other | ||
| Drive type | Four-wheel drive | |
| Variable speed type | Hydraulic variable speed | |
| Braking distance (mm) | 3300 | |
| Model | HT15-26 |
| Dimensions (mm) | 5800*1850*2750 |
| Wheelbase (mm) | 2315 |
| wheel tread(mm) | 1500 |
| Min. ground clearance (mm) | 220 |
| performance parameters | |
| System pressure (MPa) | 16 |
| Machine weight (Kg) | 4800 |
| Max. speed (Km/h) | 26 |
| Max. climbing capacity (°) | 25 |
| Min. turning radius (mm) | 4000 |
| Digging parameters | |
| Max. digging depth (mm) | 2700 |
| Dig unloading height (mm) | 2200 |
| Max. digging radius (mm) | 4600 |
| Bucket width (mm) | 500 |
| Bucket capacity (m3) | 0.2 |
| max. digging height (mm) | 4200 |
| Maximum digging force (kN) | 28 |
| Rotary Angle of excavator (°) | 180 |
| Loading parameters | |
| Max. unloading height (mm) | 3300 |
| Max. unloading distance (mm) | 850 |
| Bucket width (mm) | 1900 |
| Bucket capacity (m³) | 0.7 |
| Max. loading lifting height (mm) | 4200 |
| Max. breakout force (kN) | 36 |
| Forward shovel action time (S) | 12 |
| Engine | |
| Model | Yunnei YN27GBZ |
| Type | Turbocharged, 4 strokes |
| Rate power (KW) | 58 |
| Rate speed (r/min) | 2400 |
| Cylinders-inside diameter | 4-90 |
| Transmission system | |
| Gearbox | Fixed shaft power shift |
| Number of gear | 2 first/ 2 after |
| Hydraulic torque converter | ZL29A |
| Steering system | |
| Type | Hinged full hydraulic steering |
| Steering Angle (°) | 33 |
| Bridge | |
| Type | Hub reduction |
| Tire | |
| Specifications | 23.5-16 |
| Front wheel pressure (kPa) | 250 |
| Rear wheel pressure (kPa) | 250 |
| Crane brake | Oil brake drum brake |
| The parking brake | Manul |
| Oil amount | |
| Fuel tank (L) | 40 |
| Hydraulic tank (L) | 40 |
| Other | |
| Drive type | Four-wheel drive |
| Variable speed type | Hydraulic variable speed |
| Braking distance (mm) | 450 |
| Model | HT20-28 |
| Dimensions (mm) | 6200*1960*2800 |
| Wheelbase (mm) | 2550 |
| wheel tread(mm) | 1580 |
| Min. ground clearance (mm) | 290 |
| performance parameters | |
| System pressure (MPa) | 18 |
| Machine weight (Kg) | 5400 |
| Max. speed (Km/h) | 28 |
| Max. climbing capacity (°) | 25 |
| Min. turning radius (mm) | 4500 |
| Digging parameters | |
| Max. digging depth (mm) | 2600 |
| Dig unloading height (mm) | 2300 |
| Max. digging radius (mm) | 4600 |
| Bucket width (mm) | 600 |
| Bucket capacity (m3) | 1 |
| max. digging height (mm) | 4300 |
| Maximum digging force (kN) | 42 |
| Rotary Angle of excavator (°) | 180 |
| Loading parameters | |
| Max. unloading height (mm) | 3500 |
| Max. unloading distance (mm) | 900 |
| Bucket width (mm) | 2100 |
| Bucket capacity (m³) | 0.7 |
| Max. loading lifting height (mm) | 4200 |
| Max. breakout force (kN) | 36 |
| Forward shovel action time (S) | 12 |
| Engine | |
| Model | Yunnei 4102 |
| Type | Turbocharged, 4 strokes |
| Rate power (KW) | 76 |
| Rate speed (r/min) | 2400 |
| Cylinders-inside diameter | 4-102 |
| Transmission system | |
| Gearbox | Fixed shaft power shift |
| Number of gear | 2 first/ 2 after |
| Hydraulic torque converter | ZL29A |
| Steering system | |
| Type | Hinged full hydraulic steering |
| Steering Angle (°) | 33 |
| Bridge | |
| Type | Hub reduction |
| Tire | |
| Specifications | 16/70-20 |
| Front wheel pressure (kPa) | 250 |
| Rear wheel pressure (kPa) | 250 |
| Crane brake | Oil brake drum brake |
| The parking brake | Manul |
| Oil amount | |
| Fuel tank (L) | 50 |
| Hydraulic tank (L) | 50 |
| Other | |
| Drive type | Four-wheel drive |
| Variable speed type | Hydraulic variable speed |
| Braking distance (mm) | 600 |
| Model | HT25-30 |
| Dimensions (mm) | 6500*2040*2800 |
| Wheel base (mm) | 2675 |
| Wheel tread(mm) | 1630 |
| Min. ground clearance (mm) | 280 |
| performance parameters | |
| System pressure (MPa) | 18 |
| Machine weight (Kg) | 6500 |
| Max. speed (Km/h) | 28 |
| Max. climbing capacity (°) | 25 |
| Min. turning radius (mm) | 4500 |
| Digging parameters | |
| Max. digging depth (mm) | 2600 |
| Dig unloading height (mm) | 2300 |
| Max. digging radius (mm) | 4600 |
| Bucket width (mm) | 700 |
| Bucket capacity (m3) | 0.25 |
| max. digging height (mm) | 4300 |
| Maximum digging force (kN) | 28 |
| Rotary Angle of excavator (°) | 180 |
| Loading parameters | |
| Max. unloading height (mm) | 3500 |
| Max. unloading distance (mm) | 900 |
| Bucket width (mm) | 2200 |
| Bucket capacity (m³) | 1.2 |
| Max. loading lifting height (mm) | 4300 |
| Max. breakout force (kN) | 42 |
| Forward shovel action time (S) | 12 |
| Engine | |
| Model | Yunnei YN48GBZ (OPTIONAL) |
| Type | Turbocharged, 4 strokes |
| Rate power (KW) | 92 |
| Rate speed (r/min) | 2400 |
| Cylinders-inside diameter | 4-108 |
| Transmission system | |
| Gearbox | Fixed shaft power shift |
| Number of gear | 2 first/ 2 after |
| Hydraulic torque converter | ZL29A |
| Steering system | |
| Type | Hinged full hydraulic steering |
| Steering Angle (°) | 33 |
| Bridge | |
| Type | Hub reduction |
| Tire | |
| Specifications | 16/70-20 |
| Front wheel pressure (kPa) | 250 |
| Rear wheel pressure (kPa) | 250 |
| Crane brake | Oil brake drum brake |
| The parking brake | Manul |
| Oil amount | |
| Fuel tank (L) | 50 |
| Hydraulic tank (L) | 50 |
| Other | |
| Drive type | Four-wheel drive |
| Variable speed type | Hydraulic variable speed |
| Braking distance (mm) | 6200 |
| Model | HT30-25 |
| Operating weight | 7200kg |
| Dimensions(L*W*H) | 7800×2300×3180mm |
| Wheel base | 2550mm |
| Min.ground clearance | 300mm |
| Bucket capacity | 1.1m3 |
| Breakout Force | 38kN |
| Loading lifting capacity | 2500kg |
| Bucket Dumping height | 3350mm |
| Bucket Dumping Distance | 062mm |
| Bucket Lifting Height | 4700mm |
| Backhoe capacity | 0.3m3 |
| Max.digging depth | 4250mm |
| Sing angle of excavator grab | 190° |
| Max. pulling force | 39kN |
| Engine | |
| Model | Yuchai |
| Rated Power | 85kw |
| No.of cylinder- Bore/Stroke | 4-108*120mm |
| Max. torque | ≥261.7N.m/1800/r/min |
| Displacement | 4.9L |
| Steering system | |
| Model of steering system | BZZ5-250 |
| Steering angle | ±36° |
| Mini turning radius | 5018mm |
| Pressure of the system | 16MPa |
| Axle | |
| Manufacturer | JINLITE |
| Main Transimmison type | Double Reduction |
| Final reducer | Single stage final reducer |
| T ransmission system | |
| Torque converter | JINLITE |
| Gearbox | Fixed shaft power transmission |
| Gears | F4/R4 |
| Max.Speed | 36km/h |
| Service Brake | Air over Oil Caliper Brake; External Type: Self-regulation; Self-balance |
| Parking Brake | Manual disk brake |
| Tires | 4 |
| Size | 16/70-24 |
| Hydraulic System | |
| Digging Power of Excavator Grab | 46.5kN |
| Digging Power of Dipper | 31kN |
| Model | HT388 |
| Total length bucket at ground | 6450±80mm |
| Total width | 2650±20mm |
| Bucket width | 2620mm |
| Total height cab in top | 3120±10mm |
| Total height digging boom top | 3940±20mm |
| Wheel base | 2335+10 mm |
| Wheel tread | 2139 10mm |
| Hydraulic torque | Model---315 |
| convertor | Coolingway--Pressured oil circle |
| Gearbox | Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles | Model---WZL100 |
| Gear shift | Forward 4 Backwar 4 |
| Tyres model | 16.9-28 |
| Rated digging bucket capacity | 0.3m3 |
| Max.Digging radius | 3820±20 mm |
| Max.Digging depth | 5345±20mm |
| Max.Loading height | 3740±20mm |
| Max.Digging force | 5100kgf |
| Max.Digging height | 5470 ±20mm |
| Lifting forceat Max.Digging radius | 1220kg |
| Max. Digging depth with arm extended (telescopic arm) | 4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) | 6680±20mm |
| Working pump displacement | 63ml/r |
| Working pump pressure | 20Mpa |
| Diverter model | BZZ5-250 |
| Rod diameter (mm) | 68-70 |
| Working pressure (Mpa) | 11-14 |
| lmpact frequency | 500-900 |
| Flow scope( Umin) | 25-45 |
| kinetic energy (KN) | 49 |
| Engine brand | Yunnei (Optional) |
| Cooling type | Water cooling |
| Rated power | 92 (kW) |
| Displacement | 4.8(L) |
| Rated speed | 2200(r/min) |
| Max.Torque | 400(N.M) |
| Hydraulic oil tank | 125 |
| Fuel tank | 125 |
| Model | HT765E-4T |
| Total length bucket at ground | 6450±80mm |
| Total width | 2650±20mm |
| Bucket width | 2620mm |
| Total height cab in top | 3120±10mm |
| Total height digging boom top | 3940±20mm |
| Wheel base | 2335+10 mm |
| Wheel tread | 2139 10mm |
| Hydraulic torque | Model---315 |
| convertor | Cooling way--Pressured oil circle |
| Gearbox | Model---28 Type:Mechanically Operated/Hydraulic Synchronized |
| Driving axles | Model---WZL100 |
| Gear shift | Forward 4 Backwar 4 |
| Tyres model | 16.9-28 |
| Rated digging bucket capacity | 0.3m3 |
| Max.Digging radius | 3820±20 mm |
| Max.Digging depth | 5345±20mm |
| Max.Loading height | 3740±20mm |
| Max.Digging force | 5100kgf |
| Max.Digging height | 5470 ±20mm |
| Lifting forceat Max.Digging radius | 1220kg |
| Max. Digging depth with arm extended (telescopic arm) | 4970±20 mm |
| Max. Digging height with arm extended (telescopic arm) | 6680±20mm |
| Working pump displacement | 63ml/r |
| Working pump pressure | 20Mpa |
| Diverter model | BZZ5-250 |
| Rod diameter (mm) | 68-70 |
| Working pressure (Mpa) | 11-14 |
| lmpact frequency | 500-900 |
| Flow scope( Umin) | 25-45 |
| kinetic energy (KN) | 49 |
| Engine model | YUNNEI YN48 (OPTIONAL) |
| Cooling type | Water cooling |
| Rated power | 75 (kW) |
| Displacement | 4.8(L) |
| Rated speed | 2200(r/min) |
| Max.Torque | 400(N.M) |
| Manufacturer | YUNNEI (OPTIONAL) |
| Hydraulic oil tank | 125 |
| Fuel tank | 125 |
1. Indulge in the luxury of an enlarged cabin complete with an opulent seat. The cabin features a hydraulic forward tilting function, ensuring maintenance is not only easy but a breeze.
2. Experience versatility with the cabin's top canopy, which can be effortlessly removed, making container delivery more efficient and adaptable.
3. Enjoy the convenience of our streamlined and enlarged fuel tank, equipped with an intuitive tilting oil port for easy and hassle-free refills.
4. Our hydraulic components boast esteemed, renowned brands, promising longevity and stable, reliable performance that you can trust.
5. The large, capable radiator is specifically designed to withstand and excel in very hot climates, ensuring optimal performance under extreme conditions.
6. Effortless control is at your fingertips with the advanced hydraulic steering system, making maneuverability smooth and easy.
2. Experience versatility with the cabin's top canopy, which can be effortlessly removed, making container delivery more efficient and adaptable.
3. Enjoy the convenience of our streamlined and enlarged fuel tank, equipped with an intuitive tilting oil port for easy and hassle-free refills.
4. Our hydraulic components boast esteemed, renowned brands, promising longevity and stable, reliable performance that you can trust.
5. The large, capable radiator is specifically designed to withstand and excel in very hot climates, ensuring optimal performance under extreme conditions.
6. Effortless control is at your fingertips with the advanced hydraulic steering system, making maneuverability smooth and easy.
The integral frame of this machine offers exceptional stability, making it perfectly suited and expertly crafted for demanding excavation work.
The excavating working device, designed with a pivot center type, boasts a lightweight yet high-strength construction for superior performance and reliability.
The excavating working device, designed with a pivot center type, boasts a lightweight yet high-strength construction for superior performance and reliability.
Xiamen HTMA Co., Ltd., established in 2007, is a manufacturing powerhouse specializing in construction machinery equipment including wheel loaders, backhoe loaders, and excavators. Our sister company, Xiamen Mingyu New Energy Co., Ltd., excels in forklift production. Our headquarters is strategically located in Xiamen with an additional factory in Shandong. To complement our offerings, we also distribute XGMA products, enhancing our market synergy.Our headquarters in Xiamen, situated in the advantageous southeast coastal special economic zone, leverages the region's ability to attract top-tier R&D talent. This provides an exceptional platform for our company's research, design, and marketing initiatives.
Our Shandong factory is strategically established, considering various factors such as natural resources, traffic flow, labor costs, and policy environment. Embracing an integrated production approach, we house a casting and welding workshop, a component warehouse, an assembly workshop, and adhere to rigorous debugging standards to ensure quality.
As seasoned veterans in construction machinery manufacturing, we fully understand the significance of the traditional diesel market's stability and demand. Hence, we steadfastly maintain our production line of diesel products, continually enhancing performance, elevating the user experience, and securing a leading position amidst intense market competition.
With the global construction machinery industry's evolution, new energy lithium technology emerges as a pivotal trend. While maintaining our strength in diesel products, we proactively invest in R&D to innovate and independently develop new energy lithium solutions, seizing this market opportunity.
Acutely aware of the burgeoning importance of new energy lithium technology, we harmonize our traditional strengths with forward-thinking initiatives. Our commitment to R&D and innovation drives our expansion into new energy arenas, unveiling a line of groundbreaking lithium-powered products.
Our R&D team has achieved significant breakthroughs in new energy technologies, crafting a cutting-edge battery management system. This innovation significantly boosts battery safety, stability, and lifespan. Simultaneously, we enhance battery energy density and charging speed, delivering users a seamless and efficient charging experience.
In vehicle design, we emphasize elevating control performance and driving experience. Our new energy models excel in handling and comfort, achieving industry-leading standards.
To adeptly tackle market dynamics, we actively consolidate resources and bolster our competitive edge. Collaborating closely with upstream and downstream enterprises in the supply chain, we collectively propel the new energy lithium-electric vehicle industry's growth.
Gazing towards the future, we are committed to amplifying investment and innovation in new energy. By staying aligned with market and technological advancements, we will persistently introduce cutting-edge, efficient lithium power products, while exploring novel business models and collaborations to offer enhanced services.
Delivering exceptional, accessible services is our promise.
In summary, while preserving our diesel product strengths, we eagerly embrace the era of new energy lithium. With an open, innovative mindset, we are poised to tackle market challenges, continually sharpening our competitiveness and influence.
Ultimately, Mingyu aspires to foster win-win collaborations with partners like you!
WE WARMLY INVITE YOU TO EXPERIENCE CHINA AND VISIT MINGYU!
1.What Certificate do you have?
MINCYU workshop meet with the ISO9001:2008Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
MINCYU will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the mignyu warranty policy for
each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.What is your lead time?
It depends on the order quantity.
