Audited Supplier
Water Distribution XF-3/4/5/6 BAC Baltimore Cooling Tower Spray Nozzle Kit
We offer two types of distribution systems for use on cooling towers, closed circuit fluid coolers and evaporative condensers to optimize performance: pressurized and gravity-feed. Both types of distribution systems use large orifice non-clogging nozzle to ensure effective wetting of the heat transfer surface.
Nozzle kit, XF-3/XF-4/XF-5/ XF-6
Spray nozzles are designed for optimum coverage of either the fill or coil surface. Optimum coverage increases thermal efficiency while fully wetting the surface. This in turn prevents scale build-up that will lessen the unit capacity. There are several designs for pressurized and gravity-feed systems, each fully optimized for the application. Regardless of design, nozzles are easily removed, either to accommodate new flow rates or to replace broken nozzles. To facilitate cleaning or replacement; counterflow nozzles are installed using grommets which also allows the nozzles to be properly positioned. Kits are available, complete with insert grommets for pressurized systems or installation tools for gravity systems.
Item No. | Orifice | Diameter | Height |
XF-3 | 14mm | 69mm | 69mm |
XF-4 | 17mm | 69mm | 69mm |
XF-5 | 20mm | 69mm | 69mm |
XF-6 | 24mm | 69mm | 75mm |
Target Nozzles should be inspected regularly for missing, broken and debris blocking the orifice opening. Blocked, missing or broken nozzles and/or orifices disrupt the balance of even water flow over the fill surface and shorts the towers cooling
capability.
Always consider changing all of your nozzles when replacing your fill media. Many times end users have been sold new fill media to restore and/or increase a towers cooling capability and the nozzles have not been given equal attention at that critical point. Nozzles must be clean, unbroken and properly installed or you will never see the full benefit of your new fill replacement. Nozzles equally distributing water over the fill media is essential to tower performance and energy efficeincey.
Detailed pictures for Water Distribution XF-3/4/5/6 BAC Baltimore Cooling Tower Spray Nozzle Kit
Other Cooling Tower Water spray Nozzles specifications:
360 spray nozzle used on closed circuit cooling towers and evaporative condersers.
XF crossflow nozzle used on open cooling towers.
A or AA counterflow nozzle used on open cooling towers.
Pryamid nozzles are used in IPE, IMT, and other manufacturer's field erected units.
Package of Water Distribution XF-3/4/5/6 BAC Baltimore Cooling Tower Spray Nozzle Kit
Application of Water Distribution XF-3/4/5/6 BAC Baltimore Cooling Tower Spray Nozzle Kit
Related spare parts of BAC Baltimore cooling tower: evaporative condenser fill, blade type drift eliminator, cooling tower nozzle
Other various cooling tower spare parts:
cooling tower pvc fill materials:
cooling tower nozzles:
cooling tower drift eliminators:
1.Q: Are you Trading Company or Factory:
A:. We are Trading Company and also Factory
2.Q: What's your production ability for one month?
A:We can product Metric Tons per Month 200000 pcs .
3.Q: What's your MOQ?
A:100pcs
4.Q:What's your shipping port?
A:Tianjin,shanghai or any port as your reqirement
5.Q: What's your Payment Terms?
A:L/C,T/T,Western Union
Try order is acceptable. Sample is available.
Welcome to inquire, we will feedback within 24 hours.
