Audited Supplier
High carbon steel wire drawing machine
High carbon steel wire coil---Mechanical derusting---Belt polishing machine---Boron coating drying treatment---straight line wire drawing machine---Trunk take-up machine
Different from the ordinary wire drawing machine, the direct feed wire drawing machine adopts AC frequency conversion control technology or DC programmable control system and screen display, with high degree of automation, convenient operation and high quality of drawn products. It is suitable for drawing various metal wires with diameter less than 12 mm.
Wire take up system.The take-up system is divided into trunk take-up machine and spool take-up machine, Customers can choose according to their needs.Wire take up machine uses adjustable speed motor, in order to be able to automatically cycloid, so that the operation becomes more convenient.Capstan.
Capstan uses special materials to spray tungsten carbide on the surface and increase the height and thickness.
The drum base adopts narrow slot design to effectively prevent rust and impurities from entering the drum.
Rotary die box.The whole set of machinery uses a rotating die box, which can make it easier for the wire drawing powder to adhere to the surface
of the wire rod. Improve the quality of wire rod finished products.Protection cover.The machine adopts a fully enclosed protection system, which has good safety performance and can reduce the generation of dust, thus reducing the damage to the electrical and prolonging the mechanical life
Gear box.The mechanical transmission system adopts the direct connection between the gearbox and the motor, which can greatly reduce the noise, improve the reliability of operation and increase the transmission power. Save electricity.Inverter.The machine is equipped with frequency converter, and the energy-saving effect is very obvious. It is very convenient to adjust
the speed. The frequency converter also has many protection functions, such as overcurrent, overvoltage, overload protection and so on.
Boron coating drying system.Borax film can be attached to the surface of high carbon steel wire after boron coating and drying treatment, which is conducive
to the adhesion of wire drawing powder and improve the drawing effect of steel wire.Sand belt polishing machine.The steel wire is polished with high-speed abrasive belt to make the derusting effect better. It is conducive to boron coating and
drawing process. It is suitable for high quality drawing process.
High degree of mechanical automation, all kinds of fault information and processing information are displayed on the screen.
Model | Unit | LZ400 | LZ560 | LZ600 | LZ800 |
Capstan diameter | mm | 400 | 560 | 600 | 800 |
Drawing dies | Times | 9 | 9 | 9 | 9 |
Inlet wire diameter | mm | Φ2.5-4.5 | Φ5.5-6.5 | 6.5-8.0 | 8.0-10 |
Outlet wire diameter | mm | Φ0.8-1.4 | Φ1.6-2.0 | Φ2.0-3.0 | Φ2.8-3.5 |
Drawing speed | m/s | 10-16 | 8-12 | 6-12 | 6-10 |
Total reduction rate | % | 90.32 | 90.53 | 90.53 | 90.53 |
Motor power | Kw | 11-15 | 30-37 | 30-37 | 37-75 |
Factory History.
Hebei Kaiye Machinery Equipment Co., Ltd. was established in 2002. We are mainly engaged in the R & D, design, production and sales of CNC steel wire processing equipment, providing overall solutions for CNC steel wire processing. Products are widely used in railway, highway, bridge, tunnel, real estate, animal husbandry and other large-scale infrastructure construction, steel processing and distribution center and other fields.
Factory workshop.
We have our own wire mesh machinery and several pilot plants with strong technical force and advanced production and checkout equipment.Our main products: straight line wire drawing machine,Pulley wire drawing machine, wet drawing machine,Copper wire drawing machine,Stainless steel wire drawing machine,Galvanized wire production line,Wire winding machine,And other wire drawing supporting machinery and accessories.
Factory R&D Team.
The factory has a strong and experienced R&D team. The average working experience of each engineer is more than 8 years. Our technology is along the most advanced international route, and we can design reasonable solutions according to the requirements of customers.
Friends from all over the world.
After more than ten years of development, the company has grown into one of the leading enterprises in the industry. We adhere to the tenet of "customer first, technology leading". In the future, the company will comprehensively promote industrial development and upgrading, and build the world's leading steel processing equipment.
Q: Are you a trading company or manufacturer?
A: Our company is a factory integrating production and sales. We can provide competitive prices and services.
Q:Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
Q: How many years are your company engaged in the wire mesh machines?
A: More than 20 years. We have our own technology develop department and testing department.
Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.
Q: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.
Q: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, certificate of origin etc, your customs clearance will be no problem.
If you are interested in our machines, please contact us now,
We will provide you with professional and reasonable solutions.
