Audited Supplier
D3Q-10/16Q
Water
Electric
Wafer
Centre Sealing
Force Sealed
Normal
Low Pressure (Pn<1.6mpa)
Normal Temperature (-40°C<T<120°C)
Metal Hard Sealed
Casting
GB/T12238 API609 BS5155 En593
Industrial Usage, Water Industrial Usage
FVT
Wooden Case Packing
DN32-DN1600
Tianjin, China
8481809000
Product Description
Product feature
1.Small and light, easy to disassemble and repair, and can be installed in any position
2.Simple structure, compact, 90° turning open and close quickly
3.Small operating torque, labor-saving and lightweight
4.Flow characteristics tend to be straight line, good adjustment performance
5.Opening and closing test times up to tens of thousands of times, long life
6.Complete seal, zero gas test leakage
1.Small and light, easy to disassemble and repair, and can be installed in any position
2.Simple structure, compact, 90° turning open and close quickly
3.Small operating torque, labor-saving and lightweight
4.Flow characteristics tend to be straight line, good adjustment performance
5.Opening and closing test times up to tens of thousands of times, long life
6.Complete seal, zero gas test leakage
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Name | Stem | Handle lever | Shaft sleeve | Sealing ring | Body | Seat | Disc |
| Material | Iron | Miniature motor | Polymer composite | stainless steel | stainless steel |
| Product parameter | |
| Face to Face Design | ISO 5752-20/EN558-1/GB-T12221 |
| Flange Connection | ANSI Class125/150 JIS 5/10/16K AS2129 TableD/E BS4504 EN1092 PN6/10/16 |
| Working Pressure | 10/16bar |
| Testing Pressure | Shell Test:24bar / 2.4Mpa Seal Test:17.6bar/1.76Mpa |
| Working Temperature | -10°-450° |
| Nominal diameter | DN32-DN300 |
Optional material
(According to your requirements to give you different material choices)
Optional parameter
(According to your requirements to give you different material choices)
| NO. | Body | Disc | Seat | Stem | Type of Operation |
| 1 | Ductile iron | Ductile iron | EPDM | Galvanized 45 gauge steel | Stamped iron handle |
| 2 | Stainless steel 304/316/316L | Stainless steel 304/316/316L | PTFE | Stainless steel 420/431 /304/316/316L | Cast iron handle |
| 3 | Aluminium alloy | Aluminum bronze | NBR | Die cast aluminum handle | |
| 4 | Cast steel | Stainless steel sulfide polytetrafluoroethylene | Heat-resistant EPDM | Motorized | |
| 5 | Cast iron | Ductile iron covered with nylon | Wear-resistant EPDM | Stainless steel stamped handle | |
| 6 | Aluminum bronze | Ductile iron covered with vulcanized rubber | Fluorine rubber | Stainless steel cast handle | |
| 7 | Stainless steel coated with PTFE | Silicone rubber | pneumatic | ||
| 8 | Ductile iron spray epoxy resin | Hypalon rubber | Duplex stainless steel 2205/2507/1.4469/1.4529 | Worm gear box | |
| 9 | Stainless steel spraying Halar | HNBR | Worm gear box with signal | ||
| 10 | Stainless steel sprayed nano-ceramics | Neoprene rubber | Hydraulic maneuver | ||
| 11 | Stainless steel coated with tungsten carbide | Rubber without copper or zinc | Copper alloy | ||
| 12 | Duplex stainless steel 2205/2507/1.4469/1.4529 | Insulating rubber |
Optional parameter
| NO. | Temperature | Stressstress | Specification | Flange connection standard | Structural form |
| 1 | -20~80° | PN6 | GB/T 12238 | DIN2543-2545 | Center line |
| 2 | -20-120° | PN10-16 | API 609 | ANSI B16.5 | Double eccentric |
| 3 | 0-150° | PN25 | BS 5155 | JIS B2220 | Triple eccentric |
| 4 | -20-200° | JIS5K/10K | EN 593 | BS4504 | |
| 5 | 125LB/150LB | EN1092 |
Product Details
