Audited Supplier
Zhengyuan truck mounted water well drilling rig is a fully hydraulic top drive, efficient and multifunctional mechanical equipment, which can be widely used for drilling water wells, geothermal wells, detection wells, precipitation wells, rescue wells, gas layers, natural gas, oil extraction and other projects. This drilling rig can use compressed air down the hole drilling in various formations, and can also be combined with a mud pump to achieve dual use of water and gas. The hydraulic system and key components of the drilling rig are all from top domestic and foreign brands, significantly reducing its failure rate and extending the working life of the drilling rig. The lifting of the drilling rig tower, the unloading of drill rods, the rotation and feeding, the support legs, and the hoisting are all implemented by hydraulic systems, greatly reducing labor intensity.
The mud pump and air compressor are all on the same car chassis, which is convenient and efficient, and the overall erformance is higher thanother types of drilling rigs.With foam pump.According to customers' requirements, independent diesel engine can be equipped as drilling power.customers' requirements, independent dieseengine can be equipped.
Made from high quality materials, with fashion and compact design, that keeps our drilling rigs more efficiency and with low failure rate, more economic and durable, and with a high comprehensive cost performance. Our water drilling rigs have received the real market validation as the majority of our customers' positive feedback.
Technical parameters | Unit | SC200/ SC200S | SC300/ SC300S | SC400/ SC400s | SC500/ SC500s | SC600/ SC600s | SC800/ SC800S | SC1000/ SC1000S | SC1200/ SC1200S | SC1500/ SC1500s | SC2000S | SC3000S |
| Max drilling depth | M | 200 | 300 | 400 | 500 | 600 | 800 | 1000 | 1200 | 1500 | 2000 | 3000 |
| Drilling diameter | mm | 105-300 | 105-300 | 105-400 | 105-400 | 140-450 | 140-450 | 105-800 | 105-900 | 105-1000 | 105-1200 | 105-1200 |
| Air pressure | Mpa | 1.2-3.5 | 1.2-3.5 | 1.2-3.5 | 1.2-3.5 | 1.2-3.5 | 1.2-3.5 | 1.65-8 | 1.65-8 | 1.65-8 | 1.05-15 | 1.05-15 |
| Air consumption | m³/min | 16-55 | 16-55 | 16-55 | 16-55 | 16-55 | 16-55 | 16-96 | 16-120 | 16-120 | 30-150 | 30-150 |
| Drill pipe length | m | 3 | 3/6 | 3/6 | 3/6 | 3/6 | 3/6 | 3/6 | 3/6 | 9.6 | 9.6 | 9.6 |
| Drill pipe diameter | mm | 76/89/102/ 114 | 89/114 | 89/114 | 89/114 | 102/114/ 127 | 89/114/127 | 114 | 127 | 127 | 114/127/146 | 114/127/146 and higher |
| Axial pressure | T | 3 | 4 | 4 | 6 | 6 | 8 | 11 | 13 | 23 | 23 | 30 |
| Lifting force | T | 12 | 16 | 20 | 30 | 37 | 38 | 51/52 | 61 | 80 | 100 | 130 |
| Fast lifting speed | m/min | 31 | 31 | 30 | 30 | 30 | 29 | 28 | 28 | 28 | 30 | 30 |
| Fast feeding speed | m/min | 42 | 42 | 41 | 41 | 41 | 40 | 42 | 44 | 45 | 60 | 60 |
| Max rotary torque | Nm | 4800 | 9600/4800 | 9600/4800 | 11000/5500 | 15000/7500 | 19200/9600 | 20000/10000 | 24000/12000 | 30000 | 32000 | 40000 |
| Max rotary speed | r/min | 80/160 | 80/160 | 80/160 | 70/140 | 70/140 | 70/140 | 70/140 | 75/150 | 75/150 | 75/150 | 75/150 |
| Big auxiliary winch lifting force | T | 1.5 | 1.5 | 3 | 3 | 3 | 5 | 4 | 4 | 5 | 5 | 7 |
| Small auxiliary winch lifting force | T | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 3 | 3 | 3 | 3 | 3 | 3 |
| Advance the itinerary | m | 3 | 3/6 | 7 | 7 | 7 | 7 | 7 | 7/13 | 7/13 | 15.2 | 15.2 |
| Drilling efficiency | m/h | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 | 10-35 |
| Moving speed | Km/h | accompanying vehicle | ||||||||||
| Uphill angle | 21° | 21° | 21° | 21° | 21° | 21° | 21° | 21° | 21° | 21° | 21° | |
| Weight of the rig | T | 18 | 20 | 22 | 24 | 26 | 28 | 26 | 32 | 38 | 55 | 60 |
| Transport dimensions | m | 9.1×2.55×3.4 | 9.1×2.55×3.4 | 10×2.48×3.15 | 10×2.48×3.15 | 10×2.48×3.75 | 10.5×2.48×3.65 | 10.8×2.5×4.23 | 11.5×2.25×3.2 | 13.5×2.6×4.5 | 13.95×2.55×3.99 | 13.95×2.55×3.99 |
| Working condition | Unconsolidated formation and stone head | |||||||||||
| Drilling method | Top drive hydraulic rotary and pushing hammer or mud drilling | |||||||||||
| Matched DTH hammer | Medium and high air pressure series | |||||||||||
Feature
*SC1200 truck mounted drilling rig is a directly rotary drilling rig. This truck chassis is adopt the 8×4 special chassis of brand SINOTRUK, 11.00R20 steel off-road tire tread, with good off-road performance.
*This rig has very compact structure, the engine of chassis is adopted D10.27-40 diesel engine, the power is 196kw(strong power) The drilling rig has independent Weichai diesel engine , the power is 220kw. Not only meet the drilling requirements, but also reduce energy consumption, it is very affordable.
*This rig is design principle is an advanced hydraulic cylinder for drilling, stepless lift, it can be achieved automaic drilling. it can automatically adjust the drilling speed for different geological conditions.
*The drilling process can be achieved in pressruized drilling technology, adjust different pressure for different geological conditions, and can be viewed drilling pressure by pressure gauge. At the same time, it can adjust the drilling speed.
*The drilling rig can achieved fast drilling by manually, especially for soil. It can achieved different speed for different soil.
*It has a large lifting force hydraulic main hoist, stepless lift, and to achieve release rope quickly. When upgrading heavy, the lifting speed need slow to aviod crash the turntable and wellhead board. When put down single drill pipe, operate the quick handle, it can achieved release rope quickly like mechanical hoist.
*It has a hydraulic tool hoist, the tool hoist has large lifting force and quick lifting speed, it is both easy to loading drill tools, drill pipe and drill accessories transport, and can slide up and down with anchors, its very convenient to load and unload the drill pipe.
*It has a hydraulic cylinder control double card board forward and backward, it makes the insurance card board closed, to achieve stuck or release the pipe joints.
*It use integrated design of pneumatic, to achieve the mud pump clutch using pneumatic remote control, it has high degree of automation and easy-saving operation.
*It is installed 4 hydraulic legs and 2 mechanical legs, every hydraulic leg rod with locknut. After leveling the rig, it can lock the cylinder use locknut. So, even if the cylinder leaks, the chassis is not instability.
*The turntable use stir bars, internal turntable use spiral arc gear to transmission, it has large torque, it about 2 times of similar products at domestic and foreign.
*It is installed a generator , so that it is convenient to illuminate or work at night.
*The hydraulic system use open system, the chassis and drilling rig are separately manipulated, it can avoid misuse. Winter oil heater and summer oil radiator are installed, to adapt to different seasons hydraulic oil for heating and cooling.
*This drilling rig equipped with an auxiliary unloading cylinder, it can be used to promote the turntable ratchet, to achieve auxiliary unloading the drill pipe.
shandong Zhengyuan Drilling and Production Intelligent Equipment Co., Ltd. was established on June 29, 2019. We have established complete production workshops, research and development workshops, and their supporting facilities, specializing in the scientific research and development, design and manufacturing, and engineering construction of various perforation equipment. We are a water well drilling rig service provider that integrates research and development, manufacturing, and sales. Our company's products are widely used in various fields such as water wells, rescue wells,
dewatering wells, large-diameter blasting holes in mines (replacing rotary drills), exploration sampling, hydropower, highways, coal, oil, natural gas, coalbed methane, municipal engineering, monitoring wells, ground source heat pump holes, anchoring, and non excavation.The zhengyuan Zhongbang series products are a newly developed series of products by our company aimed at meeting the needs of foreign markets and domestic mid to low end customers. This series of products not only retains the stability of the Zhengyuan drilling and mining series products, but also further reduces production and manufacturing costs, optimizes the supply chain of complete machine spare parts, and is the most cost-effective drilling rig product in China. The products have improved the product line of the Zhengyuan family and enhanced the competitiveness of the Zhengyuan brand in the mid to low end market.
1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.
2. How can we guarantee quality?
Always a pre-production sample before mass production;always final inspection is done before shipment;and our main unit has a one-year warranty, during which all damaged accessories can be replaced with new ones. We provide machine installation and operation videos.
3. How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.
4. Do you have after-sales service?
Yes, we have a dedicated service team that will provide you with professional technical guidance. If you need, we can send our engineers to your workplace and provide training for your employees.
5. How about quality assurance?
We provide a one-year quality guarantee for the main machine of the machine.
6. How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 20-25 days.
7.Can you do OEM for me?
We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.
