Audited Supplier
Design standards : According to American petroleum institute standard API685.
Design framework : We use European advanced hydraulic model;
High standard material application.
- Foot-mounted structure or centerline supported structure.
- Single-stage, single-suction, cantilever structure.
- The pump casing can be increased according to the needs of insulation jacket structure.
- Medium temperature within 260 ºC does not require any cooling measures, higher than 260 ºC need to increase the cooling facilities; the maximum operating temperature is up to 450 ºC.
- The pumps are outfitted with a heat jacket and pump casing and/or a heat jacket in the bearing housing . The heat jackets can also be used for cooling.
- The pump and motor are separated with standard normal motor, so the pump can be changed parts at site and needs not be returned factory.
Material:
Carbonsteel; chromed steel; austeniticstainlesssteel; duplexsteel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials;
It depends the customer's request.
| ARTS NAME | S-6 | A-8 | D-1 | TITANIUM | HAST C276 |
| Casing | Cast steel | 316 AUS | DUPLEX | Ti | HAST C |
| Impeller | 12%CR | 316 AUS | DUPLEX | Ti | HAST C |
| Containment shell | Hastelloy C276 | Hastelloy C276 | Hastelloy C276 | Hastelloy C276 | Hastelloy C276 |
| Inner magnet rotor | 304/SM2C017 | 316/ | 316/ SM2C017 | Ti /SM2C017 | HAST C/ SM2C017 |
| Pump shaft | 12%CR | 316 AUS | 2205 | Ti | HAST C |
| Slide bearing | 304/SSIC | 316/SSIC | 316/SSIC | Ti/SSIC | HAST C/SSIC |
Applications:
Horizontal installation, suitable for conveying hazardous, corrosive, toxic, flammable, expensive, easy to vaporize and volatile media.
Magnetic drive sealless pumps offer significant advantages and benefits over conventional sealed designs:
No seals
No seal support systems
Complete fluid containment
Zero emissions
Zero contamination of pumped liquid
Cost effective installation
No ancillary seal support systems to specify and install
Longer mean time between failure (MTBF)
No EPA monitoring required
Improved operator safety and protection of the environment
Typical Applications Include:
Oil Refineries
FPSO (Floating Production Storage& Offtake) Facilities
Oil Rigs
Tanker Offloading (Road and Rail)
Heavy Duty Chemical Applications
Hot Oil Circulation
Petrochemical processing plants
ESCP have established a premium pump & parts resources platform for four main business range:
1 First part is for Pump overhaul,rebuild and repairs,The pump Brand we can service as follow:
•SULZER •SULZER AHLSTROM •ANDRITZ •ITT GOULDS •LEWA
•WARMNA •Gorman Rupp •HERMETIC •K S B •FLOWSERVE
2 Second part is for retrofit OEM pumps & spares:
•APP/APT
•Durco Mark Ill
•CZ/ZE/Z F/ZA/ZAO
•ACP/AD/CP/VP/S
•3196/3175/3180/5500/3393/3700/IC/JC
•LEWA
•WCPK/CPK
•T2/3/4/5/6/810
3 Third part is for casting pump OEM service:
•Available material:
•Martensitic cast steels:ASTM A743 CA-6NM,ASTM A747CB7Cu-2(H900)
•Austenitic cast steels:ASTM A743 Grade CF-8,ASTM A743 Grade CF-8M,ASTM A351CF-3M,EN 102831.4584,
•ASTM A743 Grade CN-7M,Alloy 31,654SMO
•Duplex steels(austeniticferritic):ASTM A890 Grade 3A,ASTM A890 Grade 1B
•Super duplex steels:ASTM A890 Grade 5A
•Ferritic stainless steel:AsIM A/43 CC50
•Carbon steels:ASTM A216 Grade WCB
•Grey cast irons:ASTM A48 Class No 35 B
•Ductile cast irons:ASTM A395 Grade 60-40-18
•Wear and corrosion resistant cast irons:ASTM A532 Ill A level 1,ASTM A532 Il A level 2,CB3,30Cr/Mo,
•38Cr/5Ni/2Mo/1Cu
•Titanium:ASTM B367 C-3
•Nickel alloys:ASTM A494 Grade CW-6M
4 Four part is Quality assurance for material and its properties:
1.As a trade company why do you have ability to provide one-stop pump service?
We have selected and merged all OEM pump factories sources which have brand pump's background to establish one-stop solution for OEM pump replacement parts, 3196 / 3175 / 3180 / IC /5500 / 3393, APP, Durco Mark III etc.
2. Do you manufacture high material pump parts?
We can fabricate high material super duplex steel, Nickel, Zirconium, Hastelloy C titanium etc. We have manufactured many casings, impellers, cover plates, and sleeves. Please contact us to discuss your specific requirements.
3. What information do you need to get a quote?
Please provide us with model type and the OEM part number. If you don't have that information, no problem, But please send a details images of parts, We'll do the rest.
4. Do you carry discontinued parts?
We don't carry discontinued parts but may be able to reverse engineer them. Contact us to find out how we take old, worn down parts and make new replacements.
5. Do you have repair requirement for pump? Are you Looking for sourcing some pump parts?
Sulzer, Goulds, Andritz, Flowserve, Teikoku, Hermetic, LEO, We can service all these pump, repair and rebuild it. We are dedicated in refurbishing end suction , double suction, vertical, submersible, gear, displacement and multi- stage pump, When a retrofit parts are required, Our one-stop pump resources will provide a cost-effective alternative & retrofit.
