Audited Supplier
Construction
Conductor: Aluminium conductor, round stranded compressed (RM).Insulation: XPLE compound, UV-resistant.
Core Identification: 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm² and a minimum of 16 ribs for cores above 50 mm². In the case of five core bundles the surface of the protective core should be smooth.
Electrical Properties
Rated Voltage: 0.6/1kVTest Voltage: 4 Veff kV
Minimum Laying Temperature: -20°C
Operating Temperature: -40°C~ +90°C
Maximum Short-circuit Temperature: 250°C
Maximum Conductor Temperature: 80°C
Minimum Bending Radius: 18×OD
Application
Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system.
It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting.
This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable.
Standard
Basic design to BS 7870
| BS 7870 | |||||
| NUMBER OF CORES X NOMINAL CROSS SECTION | OVERALL DIAMETER | WEIGHT | MAXIMUM CONDUCTOR RESISTANCE | MINIMUM BREAKING LOAD | CURRENT RATING |
| NO./MM2 | MM | KG/KM | Ω/KM | KN | A |
| 1x16 | 8 | 74 | 1.91 | 2.5 | 72 |
| 1x25 | 9 | 106 | 1.2 | 4 | 107 |
| 1x35 | 10.5 | 138 | 0.868 | 5.5 | 132 |
| 1x50 | 11.8 | 182 | 0.641 | 8 | 165 |
| 1x70 | 13 | 252 | 0.443 | 10.7 | 205 |
| 1x95 | 15.4 | 333 | 0.32 | 13.7 | 240 |
| 1x120 | 17 | 408 | 0.253 | 18.6 | 290 |
| 1x150 | 19 | 502 | 0.206 | 23.2 | 334 |
| 1x185 | 21 | 611 | 0.164 | 28.7 | 389 |
| 1x240 | 24 | 801 | 0.125 | 37.2 | 467 |
| 2x16 | 15.6 | 147 | 1.91 | 2.5 | 72 |
| 2x25 | 18 | 208 | 1.2 | 4 | 107 |
| 2x35 | 20 | 277 | 0.868 | 5.5 | 132 |
| 2x50 | 23.5 | 361 | 0.641 | 8 | 165 |
| 2x70 | 25.4 | 505 | 0.443 | 10.7 | 205 |
| 2x95 | 30.3 | 666 | 0.32 | 13.7 | 240 |
| 2x150 | 38 | 1004 | 0.206 | 23.2 | 334 |
| 4x16 | 18.8 | 286 | 1.91 | 2.5 | 72 |
| 4x25 | 21.2 | 430 | 1.2 | 4 | 107 |
| 4x35 | 24.1 | 553 | 0.868 | 5.5 | 132 |
| 4x50 | 27.8 | 746 | 0.641 | 8 | 165 |
| 4x70 | 31.8 | 1009 | 0.443 | 10.7 | 205 |
| 4x95 | 37.8 | 1332 | 0.32 | 13.7 | 240 |
| 4x120 | 54.4 | 1632 | 0.253 | 18.6 | 290 |
| 4x50 + 1x25 | 31.9 | 814 | 0.641/1.200 | 8.0/4.0 | 165/107 |
| 4x50 + 1x35 | 31.9 | 845 | 0.641/0.868 | 8.5/5.5 | 165/132 |
| 4x70 + 1x25 | 36 | 1105 | 0.443/1.200 | 10.7/4.0 | 205/107 |
| 4x70 + 2x25 | 40 | 1217 | 0.443/1.200 | 10.7/4.0 | 205/107 |
| 4x95 + 1x25 | 41.8 | 1438 | 0.320/1.200 | 13.7/4.0 | 240/107 |
| 4x95 + 2x25 | 42 | 1544 | 0.320/1.200 | 13.7/4.0 | 240/107 |
| 4x120 + 1x25 | 59 | 2050 | 0.253/1.200 | 18.6/4.0 | 290/107 |
| Note: Other cross-sections can be offered upon request. | |||||
How can I get some samples?
We provide free sample and will courier to you by DHL, FEDEX, UPS, TNT, etc. swiftly according to your requirements.
How do you control the quality?
QC department will control the quality during the full production process.
Inspector will inspect each item according to the order, inspection report will transfer to you before loading.
Any third party inspection will be accepted during the production or before loading, such as SGS, BV, etc.
After-sale dept will follow the order and pay high attention on the feedback from your side after all the products delivered. Any quality problem, we will arrange the technical personnel to solve and bear the corresponding customer losses..
What if the cable we need have some differences on specifications from yours?
Any differences, we can design and produce according to your requests.
What's the package of the goods?
Usually wooden or steel drum or coil, or according to your requirement
What's the lead time?
Usually 10-30 working days.
Welcome your inquiry and email soon......
