Audited Supplier
OEM label, package, size
Ansen Repair Bandage is a pre-impregnated fiberglass bandage with a knitted non- woven fiberglass structure, that gives the bandage maximum strength and failitates repairs on corner joints, elbows and other shaped fitting.
Ansen Repair Kit is packaged inside a heat- sealed click- seal bag, Each bag includes: a Ansen Pipe Repair Bandage inside a foil pouch; a 90mm (3.5") Steel Putty inside a plastic tube; and a pair of long gloves.
Sealing Products( Repairing Leaking Point) + Black or White Bandage(Reinforcing Pipe)
It is also recommend that you use other sealing product to replace the putty.
<2> Product Specification
| Product Name | P/N | Size/Product | Accessorie/Kit | Color |
| water activated polyurethane resin repair tape | PR002 | 50MM X3.6M; 50MM X 1.8M | 1. 57g/28g epoxy putty 2.Glove | white, green, red, yellow, blue, black |
| wrap seal repair bandage | PR003 | 75MM X3.6M; 75MM X2.7M | ||
| Pipe Wrapping Tape Pipe | PR004 | 100MM X3.6M; 100MM X4.5M; 100MM X4.8M; 100MM X6.1M; 100MM X9.1M; 100MM X10M 100MM X15M | ||
| Water Activated Pipe Repair Bandage Tape Steel Putty | PR005 | 125MM X3.6M; 125MM X4.5 M | ||
| Pipe repair bandage | PR006 | 150MM X3.6M; 150MM X4.5M; 150MM X10M; |
<3> Product Features
.....Repairs leak in 30 minutes
.....Applicable to pipes up to 18" (457 mm) diameter
.....Applicable on any metal or non-metal pipes
.....Repairs T-joint, elbow joint, valve thread, valve body
..... Withstand pressure up to 10 Mpa(Min wrapping 12 layers around cracked/leaking area)
.... Withstand temperature up to 200 °C (392 °F)
.... Safe for drinking water and resistant to most chemicals
.... Reinforce and strengthen pipe
.... Permanent repair and extend service life of pipes
.... Furniture and Family Tool Maintenance
<4> Product Advantage
2.Activate when mixed with water,no need to mix with activator to start curing
3.Does not produce any heat during curing
4.No sparks
5.No distortion of the base material
6. Easy to use and carry
7.Odorless, non-flammable, durable,
8.Resistance to mechanical wear and tear , corrosion resistance, high insulation
<5> Operation
1.Once the leaking area is identified, shut down relevant pipes or hoses immediately.
2.Prepare the surface by cleaning and roughening the pipe.
3.Put on enclosed latex gloves.
4.Apply Steel Putty to the leak site and mould.
5.Open foil pouch and immerse bandage in temperate fresh water for 10 seconds,must be used once the package is opened.
6.Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coverage.
7.Quickly as curing begins once it is taken out of the water.
8.Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.
