Audited Supplier
CPH 125
Brazing
Cup-Shaped
Metal
Soft, Medium ,Hard
Hard Floor, Medium Floor, Soft Floor
16/18, 20/25,35/40,60/70,80/100,120/140
22.23mm,
Concrete Floor Resurfacing, Epoxy Removal
Hand Held Angle Grinder
Dry and Wet
6.5 mm
DIACUTEX
Carton Box
125mm, 150mm, 180mm
China
82079010
Product Description
Product Introduction
Fan Segment design is easy for dust removal, big holes beside the segments provides good cooling.
Light weight design provides smooth grinding.
Specially designed bond types with premium quality diamonds, aggresive grinding.
Wide face of diamond for smoother grinding and better control.
Suits for handheld angle grinders.
#16/20 grit for aggressive removal of coatings and stone.
Also very low height for use with dust shrouds and extraction systems.
Specification Data
| Product Code | Diameter | Segment Number | Segment Height | Bore |
| CPH125 | 5" | 16 | 6.5mm | 22.23 |
| CPH180 | 7" | 24 | 6.5mm | 22.23 |
How to select a diamond grinding wheel for concrete
THe cup wheels are mainly used to do prep or resurfacing job on concrete floors, however, the hardness of concrete varies. In order to complet the job with high effiency, it is essential to choose the right bond types. Here is the chart of how to define the concrete hardness.
| Mpa | Concrete Hardness | Bond types |
| 60Mpa or More | Very hard | Very Soft |
| 40Mpa-55Mpa | Hard | Soft |
| 28Mpa-40Mpa | Medium Hard | Medium |
| 20Mpa or less | Soft | Hard |
Key Inspection Steps
There are 2 key inspections steps on concrete grinding wheels before delivery: the balance test, and bore hole test. If the cup wheels are not balanced well, it will jump during operation, so grinding wheel balancing is one of the key inspection steps; The bore size will be smaller after painting, if not do the bore size test, it will be difficult to fit the cup wheel to angle grinder.
Packaging
Goods can be transported by air, sea or by Truck, it will be handed over by several parties. Strong packaging is necessary, we are producing good quality products, we hope our goods will be in good condition when you receive them, so we pay close attention to the packaging, here I am showing you how your goods will be packed at our factory.
