Audited Supplier
purlin
ASTM, JIS, GB, AISI, DIN, BS
ISO
Galvanized
Hot Dipped/ Cold Rolled
Ship Plate, Boiler Plate, Structural Material
Mill
Stock
1.0-3.0mm
20-375G/M2
as Per Request
Taohong
Waterproof Paper Packing
As per as request
Qingdao, China
72104900
Product Description
Cmp
Xiamen taohong tech. Co.,ltd operates a quality management system approved to ISO 9001:2008 and dimensional tolerances to EN 755. This system allows quality management from an initial contract review through to product shipment. Laboratory facilities are also available to assist with quality assurance and any necessary metallurgical testing.
 |  |
C/Z/H purlin
Steel purlin, also known as steel frame, it is construction building materials, suitable for all buildings, we are supply galvanized & black material of C/Z shape section purlin, H beam/ column, square tube, round tube/bar, etc.
C/Z/H purlin specification
| C/Z/H purlin specification | |
| Steel standard: | ASTM, AISI, JIS, DIN, EN, GB, BS, |
| Steel material: | PI / GL / PPGI / PPGL / Al-Mg-Mn alloy sheet, resin tile |
| Zinc/Alu-Zinc content: | 20-375g/m2 |
| Thickness: | 1.0-3.0mm |
| Length: | as per customized |
| Size: | as per chart |
Purlins Dimensions and Weight:
C Sections - Full Section Properties
Z Sections - Full Section Properties
| Section size (mm) | t (mm) | D (mm) | Z Sections | C Sections | Mass (kg/m) | |||
| E (mm) | F (mm) | L (mm) | B (mm) | L (mm) | ||||
| 100-10 | 1.0 | 102 | 53 | 49 | 12.5 | 51 | 12.5 | 1.78 |
| 100-12 | 1.2 | 102 | 53 | 49 | 12.5 | 51 | 12.5 | 2.01 |
| 100-15 | 1.5 | 102 | 53 | 49 | 13.5 | 51 | 13.5 | 2.62 |
| 100-19 | 1.9 | 102 | 53 | 49 | 14.5 | 51 | 14.5 | 3.29 |
| 150-12 | 1.2 | 152 | 65 | 61 | 15.5 | 64 | 14.5 | 2.89 |
| 150-15 | 1.5 | 152 | 65 | 61 | 16.5 | 64 | 15.5 | 3.59 |
| 150-19 | 1.9 | 152 | 65 | 61 | 17.5 | 64 | 16.5 | 4.51 |
| 150-24 | 2.4 | 152 | 66 | 60 | 19.5 | 64 | 18.5 | 5.70 |
| 200-12 | 1.2 | 203 | 79 | 74 | 15.0 | 76 | 15.0 | 3.59 |
| 200-15 | 1.5 | 203 | 79 | 74 | 15.0 | 76 | 15.5 | 4.49 |
| 200-19 | 1.9 | 203 | 79 | 74 | 18.5 | 76 | 19.0 | 5.74 |
| 200-24 | 2.4 | 203 | 79 | 73 | 21.5 | 76 | 21.0 | 7.24 |
| 250-15 | 1.5 | 254 | 79 | 74 | 18.0 | 76 | 18.0 | 5.15 |
| 250-19 | 1.9 | 254 | 79 | 74 | 18.0 | 76 | 18.5 | 6.50 |
| 250-24 | 2.4 | 254 | 79 | 73 | 21.0 | 76 | 20.5 | 8.16 |
| 300-19 | 1.9 | 300 | 100 | 93 | 27.0 | 96 | 26.5 | 7.99 |
| 300-24 | 2.4 | 300 | 100 | 93 | 27.0 | 96 | 27.5 | 10.09 |
| 300-30 | 3.0 | 300 | 100 | 93 | 31.0 | 96 | 31.5 | 12.76 |
| 350-24 | 2.4 | 350 | 129 | 121 | 30.0 | 125 | 29.0 | 12.18 |
| 350-30 | 3.0 | 350 | 129 | 121 | 30.0 | 125 | 30.0 | 15.23 |
| 400-24 | 2.4 | 400 | 129 | 121 | 30.0 | 125 | 28.0 | 13.16 |
| 400-30 | 3.0 | 400 | 129 | 121 | 30.0 | 125 | 30.0 | 16.39 |
C Sections - Full Section Properties
| Section size (mm) | Area (mm2) | Second moment of area (x106mm4) | Second modulus (x 103 mm3) | Radius of gyration (mm) | Torsion constant (mm4) | Warping constant (x 106mm6) | Mono- symmetry constant (mm) | Shear centre (mm) | Centre of gravity (mm) | |||
| lx' | ly' | Zx' | Zy' | rx | ry | J | lw | By | xo | x | ||
| C10010 | 215 | 0.36 | 0.08 | 7.13 | 2.19 | 41.1 | 18.7 | 71.8 | 160 | 123.3 | -39.9 | 16.1 |
| C10012 | 258 | 0.43 | 0.09 | 8.48 | 2.59 | 41.0 | 18.6 | 123.6 | 188 | 122.8 | -39.7 | 16.0 |
| C10015 | 323 | 0.54 | 0.11 | 10.54 | 3.29 | 40.8 | 18.7 | 241.9 | 241 | 122.4 | -40.1 | 16.1 |
| C10019 | 409 | 0.67 | 0.14 | 13.20 | 4.21 | 40.6 | 18.7 | 491.6 | 311 | 121.8 | -40.4 | 16.2 |
| C15012 | 354 | 1.29 | 0.19 | 16.97 | 4.17 | 60.4 | 23.1 | 169.9 | 842 | 171.2 | -46.5 | 18.3 |
| C15015 | 443 | 1.61 | 0.24 | 21.14 | 5.29 | 60.3 | 23.1 | 331.9 | 1071 | 170.5 | -46.9 | 18.4 |
| C15019 | 561 | 2.02 | 0.30 | 26.60 | 6.75 | 60.0 | 23.1 | 674.5 | 1370 | 169.7 | -47.1 | 18.5 |
| C15024 | 712 | 2.54 | 0.39 | 33.47 | 8.79 | 59.8 | 23.3 | 1367.0 | 1807 | 168.5 | -48.0 | 18.9 |
| C20012 | 444 | 2.83 | 0.32 | 28.06 | 5.79 | 79.8 | 26.7 | 213.3 | 2459 | 223.6 | -51.6 | 19.9 |
| C20015 | 555 | 3.53 | 0.40 | 34.73 | 7.35 | 79.7 | 26.7 | 416.0 | 3063 | 223.2 | -51.6 | 19.9 |
| C20019 | 713 | 4.51 | 0.53 | 44.45 | 9.77 | 79.6 | 27.3 | 858.0 | 4240 | 221.0 | -53.6 | 20.8 |
| C20024 | 906 | 5.69 | 0.68 | 56.03 | 12.67 | 79.3 | 27.4 | 1740.0 | 5540 | 219.0 | -54.4 | 21.1 |
| C25015 | 639 | 6.05 | 0.45 | 47.89 | 7.93 | 97.3 | 26.4 | 479.1 | 5473 | 276.8 | -48.6 | 18.2 |
| C25019 | 808 | 7.62 | 0.56 | 59.98 | 9.86 | 97.1 | 26.4 | 971.7 | 6860 | 276.4 | -48.5 | 18.1 |
| C25024 | 1020 | 9.62 | 0.72 | 75.74 | 12.79 | 96.9 | 26.5 | 1970.0 | 8920 | 273.9 | -49.3 | 18.4 |
| C30019 | 1001 | 13.50 | 1.20 | 90.57 | 17.36 | 116.1 | 34.6 | 1205.0 | 21230 | 320.8 | -65.9 | 25.0 |
| C30024 | 1260 | 17.00 | 1.51 | 113.10 | 21.68 | 116.0 | 34.6 | 2430.0 | 26800 | 319.8 | -66.0 | 25.0 |
| C30030 | 1600 | 21.25 | 1.96 | 142.20 | 28.50 | 116.0 | 35.0 | 4790.0 | 35700 | 315.8 | -67.9 | 25.8 |
| C35024 | 1530 | 28.80 | 3.07 | 165.71 | 34.30 | 137.2 | 44.7 | 2938.0 | 72300 | 379.4 | 86.3 | 33.2 |
| C35030 | 1910 | 35.80 | 3.82 | 204.60 | 42.28 | 137.0 | 44.7 | 5730.0 | 90000 | 378.4 | -86.3 | 33.2 |
| C40024 | 1645 | 39.21 | 3.15 | 197.3 | 34.20 | 154.4 | 43.8 | 3159.0 | 95530 | 433.8 | -81.0 | 30.5 |
| C40030 | 2060 | 48.94 | 3.96 | 246.5 | 43.47 | 154.1 | 43.9 | 6179.0 | 121000 | 431.6 | -81.7 | 30.8 |
Z Sections - Full Section Properties
| Section | Area (mm2) | Second moment of area (x106mm4) | Second modulus (x103mm3) | Radius of gyration (mm) | Mono- symmetry constant (mm) | Torsion constant (mm4) | Warping constant (x 106mm6) | Shear centre (mm) | Centre of gravity (mm) | ¥ (deg.) | ||||||
| lx' | ly' | Zx' | Zy' | rx | ry | Bx | By | J | lw | xo | yo | x | y | |||
| Z10010 | 215 | 0.36 | 0.13 | 7.00 | 2.56 | 41 | 24.6 | 9.9 | 11.8 | 71.9 | 215 | -1.94 | -4.73 | 1.11 | -0.94 | 27.6 |
| Z10012 | 258 | 0.43 | 0.16 | 8.32 | 3.02 | 41 | 24.5 | 9.9 | 11.8 | 123.8 | 252 | -1.94 | -4.75 | 1.11 | -0.94 | 27.5 |
| Z10015 | 323 | 0.54 | 0.20 | 10.34 | 3.84 | 41 | 24.7 | 9.9 | 11.8 | 241.9 | 321 | -1.95 | -4.75 | 1.11 | -0.94 | 27.8 |
| Z10019 | 409 | 0.67 | 0.25 | 12.96 | 4.92 | 41 | 24.7 | 9.9 | 11.7 | 491.6 | 409 | -1.96 | -4.77 | 1.12 | -0.94 | 28.1 |
| Z15012 | 354 | 1.28 | 0.30 | 16.68 | 4.78 | 60 | 29.3 | 12.4 | 12.7 | 169.9 | 1156 | -1.88 | -5.89 | 1.01 | -1.03 | 21.8 |
| Z15015 | 443 | 1.60 | 0.38 | 20.78 | 6.06 | 60 | 29.4 | 12.4 | 12.6 | 331.9 | 1462 | -1.89 | -5.90 | 1.01 | -1.02 | 22.0 |
| Z15019 | 561 | 2.01 | 0.49 | 26.13 | 7.73 | 60 | 29.5 | 12.5 | 12.6 | 674.5 | 1859 | -1.90 | -5.92 | 1.02 | -1.02 | 22.1 |
| Z15024 | 712 | 2.53 | 0.63 | 32.65 | 10.00 | 60 | 29.8 | 18.7 | 18.6 | 1367 | 2407 | -2.88 | -8.87 | 1.54 | -1.52 | 22.5 |
| Z20012 | 446 | 2.84 | 0.50 | 27.79 | 6.58 | 80 | 33.6 | 17.5 | 17.0 | 213.9 | 3476 | -1.65 | -9.90 | 1.18 | -1.36 | 18.6 |
| Z20015 | 555 | 3.53 | 0.62 | 34.30 | 8.05 | 80 | 33.4 | 17.6 | 17.1 | 416.3 | 4261 | -2.26 | -8.30 | 1.17 | -1.36 | 18.5 |
| Z20019 | 713 | 4.52 | 0.84 | 43.90 | 10.97 | 80 | 34.4 | 17.4 | 16.8 | 857.4 | 5830 | -2.30 | -8.24 | 1.19 | -1.34 | 19.1 |
| Z20024 | 906 | 5.67 | 1.10 | 55.29 | 14.37 | 80 | 34.8 | 21.0 | 19.8 | 1740 | 7626 | -2.79 | -9.94 | 1.45 | -1.60 | 19.4 |
| Z25015 | 640 | 6.07 | 0.67 | 47.51 | 8.77 | 97 | 32.4 | 22.3 | 19.8 | 480.3 | 7666 | -1.53 | -12.23 | 1.05 | 1.48 | 14.1 |
| Z25019 | 808 | 7.62 | 0.83 | 59.33 | 10.81 | 97 | 32.1 | 25.9 | 23.5 | 971.7 | 9478 | -2.69 | -12.16 | 1.34 | -1.87 | 14.7 |
| Z25024 | 1026 | 9.64 | 1.09 | 74.89 | 14.17 | 97 | 32.5 | 27.0 | 23.5 | 1971 | 12370 | -2.62 | -12.79 | 1.27 | -1.77 | 14.3 |
| Z30019 | 1005 | 13.57 | 1.87 | 89.83 | 19.38 | 116 | 43.2 | 28.6 | 25.4 | 1209.0 | 29630 | -2.29 | -15.86 | 1.56 | -1.97 | 16.1 |
| Z30024 | 1264 | 16.99 | 2.32 | 111.79 | 23.85 | 116 | 42.8 | 20.9 | 17.2 | 2427 | 36570 | -1.99 | -10.19 | 0.94 | -1.00 | 16.2 |
| Z30030 | 1595 | 21.35 | 3.04 | 140.50 | 31.36 | 116 | 43.6 | 21.3 | 16.9 | 4786 | 48200 | -2.02 | -10.42 | 0.94 | -0.94 | 16.6 |
| Z35024 | 1535 | 28.89 | 4.83 | 164.2 | 38.74 | 140 | 56.1 | 29.2 | 27.4 | 2947 | 101200 | -2.66 | -16.44 | 1.86 | -2.17 | 17.9 |
| Z35030 | 1910 | 35.80 | 5.93 | 202.07 | 47.22 | 137 | 55.7 | 21.6 | 19.1 | 5731 | 123644 | -2.38 | -10.49 | 1.16 | -1.19 | 18.0 |
| Z40024 | 1655 | 39.48 | 4.83 | 196.3 | 38.70 | 155 | 54.0 | 34.0 | 30.3 | 3177 | 136100 | -2.49 | -18.72 | 1.73 | -2.31 | 15.0 |
| Z40030 | 2069 | 49.19 | 6.06 | 244.9 | 48.76 | 154 | 54.1 | 34.0 | 30.2 | 6206 | 170600 | -2.51 | -18.76 | 1.73 | -2.30 | 15.0 |
C/Z/H purlin feature
1. Stable Quality:
we use our excellent equipment and technology and vast experience to manufacture products with stable quality under strict control throughout all process including pig iron manufacturing, steel manufacturing, heating, rolling and cooling.
2. Flawless Surface:
Using material (slabs) manufactured under a strict quality control system, we manufacture steel plates with flawless surface by removing scales from the steel plates with high pressure water jets during the rolling process. In addition, in the transport and heat treatment, etc. of steel plates, manufacturing is conducted using state-of-the-art equipment.
3. Wide availability:
We provide a wide product availability including steel plates that satisfy official standards in Japan and overseas, high tensile strength steel for welded structures, abrasion resistant steel, atmospheric corrosion resistant steel, low-temperature service steel, and steel for building, as well as materials that are suitable for a wide variety of uses,from offshore structures (production), line pipes (transport) tanks (storage) and other high-function steel for use in energy fields. In addition, we also accept orders for steel with special specifications, such as extra-thick steel plates for molds, electromagnetic soft iron, and chromium molybdenum steel for use in high temperatures. we also provide shot blasting and primer coating upon request. We also manufacture extra-heavy thick steel plates for use in nuclear power plants, thermal power plants, hydraulic power plants, petrochemical plants and the like.
4. On-time Delivery:
We strive for on-time delivery by making the most of the advantageous seaside location of each steel mill and our control systems for each individual product under process control that effectively utilizes a computer system.
5. Precise Consulting:
The engineering divisions at our head office and various branch offices canprecisely provide consulting on the quality characteristics, applications, and processing methods of steel plates as well as technical cooperation during use, based on their vast experience and comprehensive technical capabilities.
Loading & delivery
As per seaworthy packing standards, nude packed, or packed with kraft paper or steel box.
1. Stable Quality:
we use our excellent equipment and technology and vast experience to manufacture products with stable quality under strict control throughout all process including pig iron manufacturing, steel manufacturing, heating, rolling and cooling.
2. Flawless Surface:
Using material (slabs) manufactured under a strict quality control system, we manufacture steel plates with flawless surface by removing scales from the steel plates with high pressure water jets during the rolling process. In addition, in the transport and heat treatment, etc. of steel plates, manufacturing is conducted using state-of-the-art equipment.
3. Wide availability:
We provide a wide product availability including steel plates that satisfy official standards in Japan and overseas, high tensile strength steel for welded structures, abrasion resistant steel, atmospheric corrosion resistant steel, low-temperature service steel, and steel for building, as well as materials that are suitable for a wide variety of uses,from offshore structures (production), line pipes (transport) tanks (storage) and other high-function steel for use in energy fields. In addition, we also accept orders for steel with special specifications, such as extra-thick steel plates for molds, electromagnetic soft iron, and chromium molybdenum steel for use in high temperatures. we also provide shot blasting and primer coating upon request. We also manufacture extra-heavy thick steel plates for use in nuclear power plants, thermal power plants, hydraulic power plants, petrochemical plants and the like.
4. On-time Delivery:
We strive for on-time delivery by making the most of the advantageous seaside location of each steel mill and our control systems for each individual product under process control that effectively utilizes a computer system.
5. Precise Consulting:
The engineering divisions at our head office and various branch offices canprecisely provide consulting on the quality characteristics, applications, and processing methods of steel plates as well as technical cooperation during use, based on their vast experience and comprehensive technical capabilities.
Loading & delivery
As per seaworthy packing standards, nude packed, or packed with kraft paper or steel box.
