Audited Supplier
XHHV535-4TS+XHGG502+XHLJ504
Warranty Certificate
Warranty Certificate
Network Cable Tester, HDMI Cable Tester, Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester
CE, ISO
Customized
XZH TEST
China Xi'an
854320100
Product Description
I. System purpose :
Accurately and quickly detect the main insulation failure of power cables with voltage
levels of 35KV and below; calibrate the cable length; accurately detect the direction
and depth of the cable buried.
II. System Configuration
| Product name | Model No. | Qty.(unit) |
| cable fault pre locator | XHGG502 | 1 |
| cable pipeline locator | XHGX504 | 1 |
| high voltage pulse generator | XHHV535-4TS | 1 |
III. Main technical parameters of the system: :
★Cable fault pre-location: with the reflectometer XHGG502 based on the low-voltage impulse reflection method(TDR), and high-voltage decay(flashover) method (DECAY), multiple impulse(ARC)arc reflection method.
★cable route tracer: XHLJ504 Using the principle of electromagnetic induction, now electronic technology, high power and small size, for finding the path and radiation depth of out-of-service and faulty cables.
★XHHV535-4TS High voltage 2048 J surge generator is accompanied by a surge levels switch which allows to achieve the maximum surge impulse energy at 8, 16 and 32 kV. It has features operator safety assurance systems and provides a reliable and comprehensive technical solution for low- and medium-voltage cables faults.
XHGG502
| high voltage surge generator XHHV535-4TS | Surge voltage levels and adjustment ranges | Level 1 : 0-8KV Level 2: 0-16KV Level 3: 0-32KV |
| High voltage divider: | Voltage Accuracy 1.5 grade | |
| Inside capacitor: | 4μF/32kV,16μF/16kV, 64μF/8kV | |
| Surge energy: | 2048J | |
| Surge power: | 2KVA | |
| Operating mode | Single trigger/cycle/DC | |
| Impact time | about 5 seconds for automatic impact, arbitrary control time for manual impact | |
| Safe protection | With zero start protection function, safe and reliable | |
| Discharge | Unique high-voltage measurement design, in the stop state, it will automatically discharge the internal capacitance of the device | |
| DC withstand voltage testing | Output voltage adjustment and indication range 0-32KV, Output current indication range 0-20A | |
| Burn current | Up to 160mA | |
| Connecting cable | High voltage output cable: 5m, Power supply cable: 1.8m, Protective earthing cable: 3m | |
| Safety | Overvoltage, Over-current, Overheating protection. Automatic discharge after operation. | |
| Protection rating | Not lower than IP54 | |
| GW | 120kg |
