Dphp Chemical Solvent PVC Plasticizer Bis (2-propylheptyl) Phthalate Plasticizer

Price $1800.00 Compare
Min Order 1 Ton
Shipping From Shanghai, China
Popularity 203 people viewed
Quantity
+-
 

VOSENBON NEW MATERIAL (SHANGHAI)CO., LTD

VIP   Audited Supplier 2 years
Profile Certified by SGS/BV
dphp
CAS 123-79-5
C22h4204
No
Yes
Transparaent
Plasticizer
Liquid
Doa DOP Dphp
0.924-0.929
Negligible
190
2-8°c
370.57
-48 ºC
0.9240
Coating Auxiliary Agents, Electronics Chemicals
qilu
200kg Drums
dop
Bluesail
Product Description
Product Description

DPHP is a nearly colourless, clear and practically anhydrous liquid with a hardly noticeable odour. It is soluble in the usual organic solvents and is miscible and compatible with all of the monomeric plasticisers commonly used in PVC

Composite plant ester is kind of light yellow and odorless liquid, made of natural paml oil, good resistance to low termperature. It works and does not crystallize in winter, enven at minus 18 ºC. The plastic products adding composite plant ester has high mechanical properties, excellentgel capability, low migration and good resistance.

CAS No  cas 123-79-5
1.Production application
Diocty Adipate (DOA) is an excellent cold-resistant plasticizer,it has plasticized high efficiency,low volatility,it is applicable for Polyvinyl Chloride,vinyi chloride copolymer,polystyrene ,and synthetic rubber and other resins it can let product bearing excellent softness of cold-resistant,light-resistant,light-fastness,it is Particularly applicable together with DOP,DBP to production cold-resistant farm film,,frozen food packing film,.electrical wire & cable's clad ,leatheroid,plank,outer door water hose etc.When using as paste it has low initial viscosity,good viscosity stability, many countries allow this plasticizer to be used as food packing material such as USA, France, Italy ,Japan,Holland etc.
Application Guide:
 
  1. DOA is the typical cold-resistant plasticizers with high plasticizing efficiency. Its color changes slightly when heated. It is suitable for PVC, EVC, polystyrene and synthetic rubber resins.
  2. It can make downstream products soft even at low temperature, having good light-resistance and hand-feeling.
  3. It is usually been used with the main plasticizer DOP and DBP for the production of cold-resistant agricultural thin film, frozen foods packaging film, coating layer of wire and cable, artificial leather, board, outdoor water pipe, etc.
  4. In the application of plasticized paste, could make the paste's initial viscosity low and stable.
  5. Product Parameters

     

Product Standards:
 
NO.Test ItemSuperior Grade
 
Our typical Value
 


1


Appearance
Transparent Oily liquid without visible
impurity
Transparent Oily liquid without visible
impurity
2Chroma,(Platinum-Cobalt)≤20≤20
3Purity≥99.5≥99.5
4Density(20°),g/cm30.924-0.9290.924-0.929
5Acid value≤0.07≤0.07
6Flashing Point≥190≥190
7Moisture content≤0.10≤0.10
application

 



 

Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA