Model NO.:

HL-BT30R-R24G-8

After-sales Service:

Lifetime Service

Warranty:

3 Years

Light Source:

LED Lamp

Lamp Body Material:

Aluminum Alloy

Light Type:

Solar

Color Temperature:

6000K/4000K/3000K (Option)

Power:

≥30W

Technics:

Painted Matte

Illumination Time:

Cell Type:

Lithium Battery

Charging Time (H):

Usage:

Garden, Street, Indoor, Parking Lot, Bus Stop

IP Rating:

IP65

Certification:

CE, RoHS

Voltage:

30V

With Light Source:

With Light Source

Solar Panel Size:

650X345X25mm

Solar Panel Chip:

Mono Crystalline Silicon

Solar Panel Power:

18V30W

Solar Panel Efficiency:

22%

Light Tube Size:

83X48X600mmmm

Light Power:

30W

Light Luminous Efficiency:

175lm/W

Work Mode:

8 Modes for RF+PIR Sensor

Distance of Remote Control:

Appr.100m

Distance of Radar Sensor:

10-15m

Li-ion Battery:

12.6V11ah

Battery Power:

138.6wh

Beam Angle:

120 Degree

Running Time:

5-50 Hours

Rendering Index:

Trademark:

Goginsor or OEM

Transport Package:

Cartons and Pearl Cotton or Pallet

Specification:

Package/Pcs 690x120x400mm

Origin:

China

HS Code:

9405410000

Product Description

The Remote Control Feature:

1. Solar Batten (Tri-Proof) Light 30W Tube with 2.4G Remote Control is an advanced commercial-grade energy-efficient lighting system powered by
Solar Energy and battery.
2. The range between the light and Remote control can be up to 100m.
3. One Remote Control can be linked to up to Four Groups Batten Lights.
4. Batten Lights can be combined into a lighting system with one Remote Control and operated via a single Remote Control Pad.
5. Bright Powerful 30W lighting supplied by 120 LED SMT2835 with adjustable brightness 8% to 100% via the Remote Controller.It can last for
50 hours at 8% brightness
6. Extended and Improved 18V 30W Solar Panel with High Energy Conversion rate to charge full the battery in 5-6h in sunny weather conditions.
7. Detached Solar Panel design with 3m extension cord allows keeping the panel outdoor at the direct sunlight while the light can be used at
shaded locations or indoor.
8. The light can be operated with Remote pad or manually switch.
9. Suitable for outdoor and indoor use including daytime operation.
10.Durable Body made of Aluminium combined with industrial-grade pc. enhanced heatproof and weather resistance.
11.Easy to install, setup and operate. Completely safe. Charging protection and discharging protection.
12. No maintenance cost. User-friendly design, no wiring or any professional installation needed.

Syncing the Remote Control to the Solar Light

Syncing the Remote Control to the Solar Batten Light

Find one end of the batten light, which is a control panel with a switch, and the indicator light should not be visible.
Keep holding the MASTER ON button ("I" is ON "O" is OFF),and push the power button on the light head, continue to hold the MASTER ON button.
The solar light head will light and flash gently three times indicating the program has been accepted
Release the MASTER ON button.
The light is now is standard mode and can now be turned ON/OFF with the MASTER "I" and "O" at the top of the remote and dimmed using the dimmer buttons.
Now select a work mode from the below

Work Modes
The Solar Batten Light has 8 pre-programed work modes.

Mode Key	Mode Name	Running Mode
1 I	Mode 1	Light on 30% from dark to dawn.
2 I	Mode 2	Light on 50% for 8hrs, and then Light off.
3 I	Mode 3	Light on 80% for 4hrs, and then Light off.
4 I	Mode 4	Light on 100% for 2hrs, and then Light off.
1O	Radar Sensor Mode1	Light on 100% for 3hrs, then to 0% until motion is detected, where the light will operate at 50%.
2O	Radar Sensor Mode 2	Light on 100% for 3hrs, then to 5%, until motion is detected, where the light will operate at 50%.
3O	Radar Sensor Mode 3	Light will not turn on unless motion is detected, where the light will operate at 100%.
4O	Mode RF	returns remote to normal mode (as per left image)

Note:
1. Once a program mode is selected the Batten light cannot be turned ON/OFF or dimmed with

the Master button. Choose button '4O' (RF Mode) to revert to standard mode to control these

functions.

2. In this version, the remote control cannot control groups separately, and even if the remote

control mode (4O)is selected, it can only control all lights together.

Programme Clear
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
1. Turn on the light
2. Quickly press Master " I " key 5 times
3. LED lights will blink 5 times which means that the Programme is cleared successfully.

Getting Familiar with the Batten Light
Charging Indicator Light
1. Solid Green LED = Battery full Charged
2. Flashing Green or Yellow or Red = Battery charging
3. Battery Level Display:
Green LED = High Volt ( >11.5V ),
Yellow LED = Medium Volt (11.5-10.5V),
Red LED = Low Volt (<10.5V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
·On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.

Adjust the radar Sensor Delay Timer
The following instructions indicate how to adjust the amount of time the light will stay on when the PIR sensor is triggered when operating
using any of the above-mentioned 'Radar Modes'. The timer can be adjusted from 10-300 seconds. The default timer setting is 10 seconds.
The light will constantly operate while the sensor is being triggered.

On the sensor end of the tube, use your thumb to pull apart the buckles on both sides.
Use a Phillips head screwdriver to turn the delay adjustment knob clockwise to the desired time.