Audited Supplier
Charging Indicator Light - LED Indicator to show current charging status. When first unboxed, please allow the batten light to charge
completely before use.
1. Solid Green LED = Battery full Charged
2. Flashing Green or Yellow or Red = Battery charging
3. Battery Level Display:
Green LED = High Volt(12.6V-11.8V),
Yellow LED = Medium Volt(11.8-10.2V),
Red Led = Low Volt(10.2V-9V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.
Syncing the Remote Control to the Solar Light
 | Syncing the Remote Control to the Solar Batten Light
and push the power button on the light head, continue to hold the MASTER ON button. 3.The solar light head will light and flash gently three times indicating the program has been accepted 4. Release the MASTER ON button. 5. The light is now is standard mode and can now be turned ON/OFF with the MASTER "I" and "O" at the top of the remote and dimmed using the dimmer buttons. 6.Now select a work mode from the below. | |||||||||||||||||||||||||||
 | Work Modes The Solar Batten Light has 8 pre-programed work modes.
1. Once a program mode is selected the Batten light cannot be turned ON/OFF or dimmed with the Master button. Choose button '4O' (RF Mode) to revert to standard mode to control these functions. 2. In this version, the remote control cannot control groups separately, and even if the remote control mode (4O)is selected, it can only control all lights together. |
Programme Clear
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
1. Turn on the light.
2. Quickly press Master " I " key 5 times.
3. LED lights will blink 5 times which means that the Programme is cleared successfully.
Adjust the PIR Sensor
1. LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.
2. TIME Dial: Adjust delay time from 5 seconds to 5 minutes.
3. SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).
FAQ
1.Q: Are you a factory or a trading company?
A: We are a manufacturer. Welcome OEM and ODM for you.
2. Can we have a sample order?
A: Of course! Any sample order is welcome for testing and checking.
3.What is the warranty for the products?
A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years
4.How to ship the goods?
A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)
5. How to deal with the fault?
A: If the problem caused by manufacturing quality, we will change and replace it in free.
