Audited Supplier
3060AHR machine features:
1. The main castings of the machine are made of high-grade cast iron. After annealing treatment and shock aging treatment, the internal stress of the castings is removed, the stability of the castings is greatly improved, and it is not easy to deform;
2. In order to improve work efficiency, the company's machine tool material thick, stable fuselage, to meet the heavy cutting and fine grinding of the machine rigid demand;
3. The guide rail is coated with high-grade wear-resistant adhesive, and the precision shovel flowers ensure the accuracy and durability;
4. Spindle arm end swing 0.003mm;
5. Precision ball screw, more light, more accurate, more durable;
6. The main components of the hydraulic system are independently designed, low vibration, low noise;
7. Reasonable cable pipeline design, indomitable;
8. Lubricating oil road boot self-test, fault alarm, automatic cycle, equipped with pressure sensor to ensure that there is no lack of guide rail
PCA 3060 contain: 3060AH/3060AHR/3060AHD/3060NC/3060CNC
| Parameter list | parameter | unit | PCA3060 |
| ability | Table area(x*y) | mm | 300*600 |
| Maximum left and right movement(x) | mm | 720 | |
| Maximum amount of movement before and after(Y) | mm | 360 | |
| Maximum distance from table to spindle center | mm | 520 | |
| Maximum weight of table | kg | 600 | |
| workbench | Table T-slot | mm×N | 14*1 |
| Table speed | m/min | 5-25 | |
| front and rear structure | Front and rear hand wheel feed (1 grid /1 turn) | mm | 0.02/5 |
| Automatic feed front and rear | mm | 0.1-8 | |
| Dart back and forth(50HZ/60HZ) | mm/min | 990/1190 | |
| Grinding wheel | Grinding wheel size | mm | 350*40*127 |
| Grinding wheel speed(50HZ/60HZ) | R.P.M | 1450/1740 | |
| Up and down structure | Upper and lower hand wheel feed (1 grid /1 turn) | mm | 0.005/1 |
| Up and down fast moving speed | mm/min | 230 | |
| motor | Spindle motor | HXP | 5*4 |
| Up and down drive motor | W | 150 | |
| Hydraulic motor | HXP | 2*6 | |
| Flush motor | W | 90 | |
| Front and rear drive motor | W | 80 | |
| dimension | Overall dimensions of the machine (L × W × H) | mm | 2000×1900×1810 |
| Weight (approx) | kg | ≈2200 |
Standard configuration
1. One 300*600mm electromagnetic sucker
2. One set of cooling water tank
3. A set of flange/flange wrench
4. A set of horizontal adjusting screws and foot pads
5. One hydraulic system (without hydraulic oil)
6. One ordinary grinding wheel 350*40*127mm (46#)
7. A set of wheel removal screw/pen holder/pen
8. One adjustable disk controller
9. A set of grinding wheel balance frame/balance rod
10. A set of up and down quick functions
11. Toolbox/Standard tools/instruction manual set
Remark
AH left and right hydraulic, front and back step, up and down manual
AHR left and right hydraulic, front and back step, up and down fast lift
AHD left and right hydraulic, front and rear step, up and down servo automatic control
NC left and right hydraulic, front and rear servo, up and down servo automatic control
CNC X, Y, Z, three axis CNC
