Yokistar Spray Paint Booth for Truck and Bus

Price Negotiable Compare
Min Order 1 Set
Shipping From Guangdong, China
Popularity 254 people viewed
Quantity
+-
 

Guangzhou YOKISTAR Co., Ltd.

VIP   Audited Supplier 16 years
Profile Certified by SGS/BV
YS-TB15
Paint Booth
CE, ISO9001-2008
Steel & Aluminum
Yokistar
Painting & Powder Coating
Downdraft Airflow Way
Diesel
Dry-type
New
Riello Diesel Burner
1X220V,3X380V,Your Special Voltages Are Accepted
White, Blue, Orange and Red
Huangpu Port or by Your Order
Spray Booth, Prep Station, Infrared Curing Lamps
YOKISTAR
Bubble Film Packing for Sea Transportation in Bulk
Guangzhou, China
84198990
Product Description
Model: YS-TB15
Inside dimention: 15,000x5,000x5,000mm(LxWxH).
Any Size Requirements Can Be Met.
Applied for large truck spraying

A. During painting, spray booth can offer a sealed environment with cleanness, safety and excellent lighting for the painting operation of all kind of components and different products.
B. During baking, drying time, temperature and humidity in spray booth can be set according to different paint materials to achieve a perfect high-quality spraying and baking for your cars.
C. Spray booth makes spraying and baking operation with no limits of all kinds of whether, thus ensuring physical fitness of operators and absolute safety of equipments.

Warranty
The goods are guaranteed for 12 months from the date of receipt, but the filters and lamps are not guaranteed. It cannot be applied for damages caused by negligence of operations or mishandling of the machine.

YOKISTAR Products
High quality and advanced technology are applied in YOKISTAR product ranges, involving automotive spray booth, bus and truck spray booth, prep station, mixing room, bench spray booth, open face spray booth and infrared curing lamp.




 
 
  Inside dimension15,000x5,000x5,000mm(LxWxH)
  Outside dimension15,144x6,896x5,600mm(LxWxH)
Pit2 rows of pits in the ground for exhaust air, dimension of each pit is 2 1000 × 760mm (L × W), with galvanized grilles made by twisted steel and flat bar above.
Main doorFolding door, 4-folds, 4000× 4500mm(W× H), galvanized steel frame, with polystyrene(EPS) inside, colour: blue.
Escape door2 units, 800 × 2000 mm (WXH), colour: white.
Room bodyProfiled bar beams in the roof to strengthen the room body; wall panel thickness: 70mm, width: 1150mm, tongue and groove structure, 0.476mm colour steel with polystyrene(EPS) insulation inside, colour: white.
Lighting systemCeiling Lights: 30Units× 4Pcs=120Pcs× 36W, with electronic ballasts. Side Lights: 36Units× 4Pcs=144Pcs× 36W, with electronic ballasts, vertically set, up and down interleaving installation.
Generator settingIntake air from side upper direction, exhaust air from back upper direction, quadrate steel frame, outside is white coated steel  , inside is galvanized steel  , filled with heat preservation material in the middle
Intake and exhaust air system(3 units)2 × 7.5KW double-intake centrifugal fans for intake air, model YDW4.5M, air capacity is 84,000m3/h.;
1× 11KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-710H, air capacity is 72000m3/h. Equip manual dampers for exhaust air.
Heating system1 unit RIELLO RG5S oil burner, heating productivity: 260,000Kcal/h., stainless steel heat exchanger, 3pcs pneumatic dampers actuate from spraying to baking cycle.
Filtering systemPre-filter, high efficiency filter(ceiling filter), exhaust fiberglass fiter, activated carbon filter.
Roof Plates50mm thick EPS heat insulation panels.
Control bo xSpraying, heat spraying, baking, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, ampere meter, voltmeter, hours meter, temperature limit controller, pressure gauge. Exhaust star-delta motor start...
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA