Audited Supplier
The working process of the cone rolling machine mainly has the following three steps,
In the first step, the workpiece is fed into three rollers. One roller is above the workpiece, called the upper roller, and two are below the workpiece, called the lower roller. This is a three-roll plate rolling machine
The second step, the roller shaft moves, one is that the upper roller is pressed down, the lower shaft or side shaft is stationary, the second kind of lower roller or side roller moves upward, and the upper roller is stationary.
The upper roller of the roll cylinder workpiece is parallel to the lower roller when it is pressed down, and the upper cone of the tapered cylinder workpiece is skewed to the lower roller when it is pressed down;
The third step is to reverse the workpiece through the reversing motion of the moving roller, and to ensure that the amount of depression of the upper roller is unchanged, so that each generatrix of the workpiece has the same curvature or curvature distribution, and becomes a cylinder and a cone.
| Model | 8X4000 |
| Adjust way | Hydraulic |
| Max processing capacity | Steel 8mm, stainless steel 5mm |
| Max motor power | 4kw*2picec,3kw*1piece |
| Oil pump motor power | 2.2kw |
| Total power | 13.2kw |
| Roller quantity | 3 solid rollers |
| R0ller length | 2000mm |
| Roller data | Small DIA 30mm,big DIA 200mm |
| Measure | 4500x1500x1500 |
| Weight | 4000kg |
SALES AND SERVICE NETWORK
1 how long have you been in this filed?
we have been in this filed for more than 15 years.2 Do you have any Certification with product or your factory?
yes, we have passed TUV certification with our product and factory.
3 where is your factory?
we are in shandong province,it is about 150KM far from Qingdao port.
4 Can we be as your agent in our country?
yes, if you have this idea, welcome to visit our factory and talk about this, or we fly to visit you.
