Ostomy Pouch Medical Adhesive Drainable Ostomy Bag with Clamp Colostomy Pouch

Price $0.80 Compare
Min Order 1000 Pieces
Shipping From Zhejiang, China
Popularity 409 people viewed
Quantity
+-
 

Ningbo Multi Channel Co., Ltd.

VIP   Audited Supplier 3 years
Profile Certified by SGS/BV
Ostomy Care Products
PE, Non-Woven ,PE, Active Carbon
Ethylene Oxide Sterilization
3 Years
Adult
With Logo Printing
customized
10PCS/Box
27.5 cm *15 cm
Ningbo
3006910000
Product Description
 
Product Description

 

Product nameOne-piece open ostomy bag from Celecare
BrandCelecare
ModelA002(mesh film/non-woven fabric / non-woven fabric outer ring)
Specification15×27,10pieces/box, 20pieces/box
Product featuresoft and breathable(non-woven fabric, mesh film),low risk of allergy, no leakage, no swell, the buckle and folding strap are easy to use.
Application scopesuitable for people with colostomy or ileostomy
Expiry datethree years
Storage conditionstore in a cool, clean and dustless environment, away from direct sunlight
Notefollow a doctor's advice; Wipe the skin around the stoma before wearing the ostomy bag, in order to keep the skin dry, and ensure that the ostomy bag will remain sticky; Do not arbitrarily discard it after use.

1. Wipe the stoma and its surrounding skin with warm water and dry, remove the sclerotic keratinised skin and stain, keep the skin around the stoma clean and dry.
2. Measure the size of the stoma with the measuring card supplied. Do not touch the stoma with your fingers while measuring it.
3. According to the measured size and shape of the stoma, cut a hole of an appropriate size on the film of the ostomy flange.The hole diameter is usually 2mm bigger than the stoma diameter.
4. Peel the protective release paper on the inside ring of the flange and stick aiming at the stoma(It is good to blow air into the bag before sticking, in order to prevent thin films from sticking to each other), and then strip the protective release paper on the outside ring, and carefully paste up from the middle towards the outside.
5. In order to make stickup secure(especially in areas and seasons with low temperature), you should press the pasted part with your hands for several minutes, in turn, the hydrocolloid flange could increase viscosity with the rising temperature.
Detailed Photos

 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA