Audited Supplier
0.2mm-3.0mm
Until 100% Satisfaction
Satisfaction Guaranteed
Black and White
Electrical Engineering, Roads & Railways & Airports Project, Water Conservancy Project, Landfill Site
Reinforcement, Drainage, Filtration
Composite Geotextiles
PE
Composite Drainage Network
2-6 Meters
20-50m
Smooth
5-8 Millimeters
Sentai
Export Special Packaging
customizable
Dezhou City, Shandong Province
3926901000
Product Description
Composite drainage network is a new type of drainage geotextile material, mainly composed of high-density polyethylene as raw material, processed through special extrusion molding technology, with a three-layer special structure. The middle reinforcement bar is rigid and longitudinally arranged to form a drainage channel. The cross arranged reinforcement bars form a support to prevent the geotextile from being embedded in the drainage channel, and can maintain high drainage performance even under high loads. The composite use of double-sided adhesive permeable geotextile has the comprehensive performance of "filtration drainage breathability protection" and is currently the drainage material.
The three-dimensional composite drainage network is a material produced by pressing, mainly using high-density polyethylene (HDPE) as the raw material. The overall structure is quite distinctive, with a three-layer structure, high rigidity, vertically arranged to form drainage channels, and has a certain support force, which can prevent situations where water cannot be discharged under stress. Even under pressure, being able to discharge water is something that many materials cannot achieve today.
The characteristics of three-dimensional composite drainage network:
In addition, this material also has an isolation effect, separating the aggregate layer and limiting its movement. Generally speaking, this material has better tensile strength than geogrids, providing support. After the road surface ages and cracks form, a large amount of rainwater enters the cross-section. In this regard, the three-dimensional composite drainage network will be directly laid under the road surface to replace the drainage foundation. This structure can extend the service life of both hard and flexible pavement systems.The characteristics of three-dimensional composite drainage network:
In addition, this material also has an isolation effect, separating the aggregate layer and limiting its movement. Generally speaking, this material has better tensile strength than geogrids, providing support. After the road surface ages and cracks form, a large amount of rainwater enters the cross-section. In this regard, the three-dimensional composite drainage network will be directly laid under the road surface to replace the drainage foundation. This structure can extend the service life of both hard and flexible pavement systems.The characteristics of three-dimensional composite drainage network:
| No. | Item | Unit | Value | ||
| 1200 | 1400 | 1600 | |||
| 1 | Unit weight of compound | g/m2 | ≥1200 | ≥1400 | ≥1600 |
| 2 | Thickness of compound | mm | ≥6.0 | ≥7.0 | ≥8.0 |
| 3 | Tensile strength of compound | KN/m | ≥16.0 | ||
| 4 | Hydraulic conductivity of compound | m2/S | ≥1.2×10-4 | ||
| 5 | net and non woven geotextile | KN/m | ≥0.3 | ||
| 6 | Thickness of net core | mm | ≥5.0 | ≥6.0 | |
| 7 | Tensile strength of net | KN/m | ≥13.0 | ≥15.0 | |
| 8 | non-woven geotextile weight of unit area | g/m2 | 200 | ||
| 9 | non-woven geotextile permeability | cm/s | ≥0.3 | ||
| 10 | Width | m | 2.1 | ||
| 11 | Roll length | m | 30 | ||
Before laying the composite drainage network, the foundation should be carried out. Firstly, the next layer should be leveled and compacted, with a flatness not exceeding 15mm and a density that meets the design requirements. The surface must not have hard and protruding objects such as gravel and gravel. Paving the natural environment; Outdoor temperature above 5 ºC, wind below level four, no rain or snow. In case of special circumstances, construction must be carried out in a natural environment and protective measures should be taken.
When paving the composite drainage network, it should be flat and level, and not crooked or stretched. Overlapping areas should be fixed with U-shaped nails or connectors. The direction of the main compressive strength of the reinforcement should be perpendicular to the direction of the dam foundation, and the length of each overlapping steel bar should be equivalent to the main compressive strength of the building steel bar. The overlap (vertical) should not be less than 15 centimeters, fixed with U-shaped nails or connectors at intervals of 1.0 meters. The length of the horizontal steel bars should be 30-90 centimeters, and the overlapping parts of the steel bars should be fixed with U-shaped nails or plastic ropes.
When paving the composite drainage network, it should be flat and level, and not crooked or stretched. Overlapping areas should be fixed with U-shaped nails or connectors. The direction of the main compressive strength of the reinforcement should be perpendicular to the direction of the dam foundation, and the length of each overlapping steel bar should be equivalent to the main compressive strength of the building steel bar. The overlap (vertical) should not be less than 15 centimeters, fixed with U-shaped nails or connectors at intervals of 1.0 meters. The length of the horizontal steel bars should be 30-90 centimeters, and the overlapping parts of the steel bars should be fixed with U-shaped nails or plastic ropes.
Subsequently, backfill soil was carried out to solve the problem. The filling material for the dam foundation within the scope of the composite drainage network should not exceed a larger diameter of 6cm. The first layer of the composite drainage network should use a lightweight excavator or front small shovel truck, and the road should be compacted along the embankment direction. The compacted thickness should exceed 60cm. After the raw materials of the composite drainage network are paved in a timely manner, filling materials should be added immediately to prevent prolonged exposure to the sun. The general time interval should not exceed two days.
quality assurance
1. Regularly or according to your requirements, we entrust national testing institutions to conduct quality inspections
2. Strictly follow the ISO9001-2008 international quality system standard to monitor and manage the entire process of production, quality testing, and measurement to ensure product quality
3. We provide refund, replacement, and repair services for construction delays or unqualified construction related to quality (excluding damage or losses caused by customer liability or uncontrollable natural disasters). We will respond to customer feedback on quality issues within 24 hours.
after-sale service
1. In order to provide comprehensive technical support to customers, we will promptly provide technical and other relevant information as required.
2.If necessary, we will assign professional technical personnel to the construction site to provide technical training to the construction personnel and provide technical guidance throughout the entire construction process.
3. For damages caused by transportation and delivery, we will inspect them through the provided pictures and videos after receiving the complaint. If our responsibility is confirmed, we will provide free replacement.
After the construction is completed, according to your requirements, our technical personnel can participate in the final acceptance
Our abilities
Our company is a comprehensive trading company that integrates design, production, and sales, with its own factories and cooperative factories. You will also find our prices very competitive.
All products are produced in accordance with the requirements of the national quality system, and have been sampled and accepted by the national and provincial technical supervision departments, all of which meet national standards
international partnerships
We export various geotechnical materials and other products to various parts of the world. With excellent quality and service, our products are exported to the United States, Japan, Europe, Australia, North America, South America, and Southeast Asia.
Industry certification
Quality is the core of our work. We focus on creating high-quality products and processes, and providing excellent customer service. Therefore, our company has passed ISO9001 and ISO14001 certifications.
The company adheres to the policy of "pursuing excellence, integrity and innovation, and win-win cooperation", conforms to popular trends, responds quickly, and continuously provides products with higher quality and more competitive prices, winning unanimous praise from customers.
Work with us
If you are interested in a wider range of our geotechnical materials and other products, please contact one of our representatives today to discuss your requirements.
We welcome the establishment of new partnerships with businesses around the world.
