Audited Supplier
Machine Introduction
The output material can be applied for granulation, blow molding and injection. The whole production line is easy to operate, efficient and low energy consumption.
There are 300-2000kg/h capacity , we need your detailed requirements to make quotations according.
A typical pp pe washing plant is consist of the following components:
• Belt conveyor: For waste material infeeding.
• Metal Detector - detects metal contamination that may remain in the bottles
• Crusher: Wet crushing system.It used for material size reduction and pre-washing by water spraying from the top.
• Screw conveyor : For PP PE flakes transportion
• High speed Friction washer: High speed friction washing could achieve a good cleaning effects through the blades on the beating and rub.
• washing tank/ float washer: For flakes floating washing and conveying.
• Horizontal dewatering machine( Dehydrator):This machine is mainly used for the drying of the pp pe flakes , it throw the water out from the screen by high speed rotating ,and the plastic get out of the machine enters into the next procedure from the outlet .The machine has a good drying effect and high energy efficiency. The paddle is made of high wear-resistant materials, can be replaced more conveniently.
• Blower and transition silo: transportation to storage silo.
• Control cabinet: For control the whole system intensively.
Output capacity : 300kg/h, 500kg/h, 1000kg/h, 1500kg/h, 2000kg/h
Product Specification
capacity | Ancillary staff | Installation power | Water Consumption | Workshop(M*M*M) |
300kg/h | 6Persons | 156KW | 3Ton/h | 35 (L)×10(W)×6(H) |
500kg/h | 6Persons | 186KW | 5Ton/h | 35 (L)×10(W)×6(H) |
1000kg/h | 8Persons | 307KW | 6Ton/h | 35 (L)×10(W)×6(H) |
2000kg/h | 10Persons | 380KW | 10Ton/h | 35 (L)×10(W)×6(H) |
Plastic recycling machine/ Waste PP PE film bags washing line
Features:
1. Main material contact with water adopt stainless steel 304.
2. Complete solution for washing line. installation,water circulation and operation training.
3. Capacity is optional from 300kg per hour to 5000kg per hour.
4. Negotiable washing process to help client get the most suitable washing line.
Suitable for soft and hard PP/PE plastic waste film bottles
Crushing with water
This machine is used to load the crushed plastic scraps and friction with water spraying to wash away the dirty
This machine is mainly used to clean the dirty on the surface of PP PE scraps
Dewatering process
Final product water content less than 8%
Use hot water mixing with caustic soda or other detergent to remove oil, glue and other impurities.
With special design to discharge impurities which float on the water (such as label, bottle caps, etc). This design will improve washing effect.
Hot air can be generated by the motor and heating system to re-dry the material initially dried by the desiccator and blow it to the silo for collection.
It can be screened with dry materials, and impurities such as dust labels in the materials can be carefully cleaned to obtain clean and identical materials.
To sort out the bad color bottle flakes and get the good color PET flakes to improve the final flakes quality.
Our machine main motor is Siemens brand, inverter ABB, temperature controller Omron, all international famous brand components:
Welcome to visit my factory to check machine
1.5 hours driving time from Shanghai to my city
Q: What about the payment terms?
----Always 30% down payment as deposit,70% balance payment after inspection before shipping.
Q: What is your guarantee time?
----Our guarantee time is 12 months.
Q: If you will send engineer coming to our factory to install and test the machines?
----Yes,Every set of machine we will send professional engineer to your factory and help installation and test the machines for you.
Q: If you have CE,SGS,ISO certificate?
----Yes,except these,if you also need other certificates,we also can help to apply.
Q: If we buy your machines, can you offer us wear-out spare pats?
----Yes,We provide our high quality machine 1 years' guarantee,and we will also offer you 1 years wear-out spare parts for free. Once your machines broken or doesn't work within 1 years and you can't solve it, firstly, we will try to help you to find problems from your words description by phone or other communication tools. Secondly, if the phone solutions still not work, our engineers will go to your factory to solve it. Meanwhile, they will teach you the related experiences for fixing.
Q: What is the machine voltage?
----380V 50hz 3 phase or any other voltage according to client's requirement.
