Audited Supplier
Video Technical Support, Engineers Available to Se
2 Years
<15 Years
380V
Horizontal
Oil Extracting From Tires
Wood, Coal, Natural Gas, Fule Oil
Direct Heating /Indirect Heating
5~15 Tons
Tyre, Plastic, Rubber, etc
Assembled Boiler
Tyre Waste Rubber Pyrolysis Recycling Machine
Pyrolysis Oil, Fuel Oil Steel Carbon Black
Q345r/304/310S/316L
16mm/18mm
Waste Oil Refinery Equipment,Plastic Rubber Pyroly
Waste Tyre/Rubber/Plastic/Oil Sludge
PLC, Engine, Bearing, Gearbox, Motor, Pressure Ves
Coal,Wood,Gas,Fuel Oil
BNTET
Full Container
600.00cm * 230.00cm * 200.00cm
China
8419409090
Product Description
-What is Plastic Pyrolysis Plant?
Waste plastic pyrolysis plants are facilities that convert many types of waste plastics into useful substances without releasing harmful by-products. This process, called pyrolysis, uses controlled heat to break down the large molecules in the plastic into smaller components that can be used for a variety of purposes. The main source of fuel for the pyrolysis plant is plastic waste,which can be converted into oil.
-Raw Materials: Waste Plastic Types
PE, PP, PS, ABS - Recommended to produce pyrolysis oil
* Recommended for their high oil yield during decomposition.
* Recommended for their high oil yield during decomposition.
PVC - Not suitable for pyrolysis
* Contains chlorine, and during decomposition, it releases hydrogen chloride, which can corrode pipes and equipment.
* Combustion of decomposed PVC can release carcinogenic dioxins.
* Contains chlorine, and during decomposition, it releases hydrogen chloride, which can corrode pipes and equipment.
* Combustion of decomposed PVC can release carcinogenic dioxins.
PET - Not suitable for pyrolysis
* Does not yield oil during decomposition.
* Releases oxygen during the decomposition process, posing a safety hazard.
* Does not yield oil during decomposition.
* Releases oxygen during the decomposition process, posing a safety hazard.
Final Product Applications
1.Fuel Oil (40%-45%): Known as fuel oil, pyrolysis oil, heating oil, furnace oil. Used as industrial fuel for cement plant, steel
plant, metallurgical plant, glass plant, power plant etc.
2.Carbon Black (30%):Used as raw materials for rubber and plastic industries after further processing. Or used as heating fuel.
3.Flammable Gas or Steel wire(25%-30%): Known as combustible gas or non-condensable gas. Routed to gas burners of heating system as fuel supply.
plant, metallurgical plant, glass plant, power plant etc.
2.Carbon Black (30%):Used as raw materials for rubber and plastic industries after further processing. Or used as heating fuel.
3.Flammable Gas or Steel wire(25%-30%): Known as combustible gas or non-condensable gas. Routed to gas burners of heating system as fuel supply.
Model | BN-PR-3 | BN-PR-6 | BN-PR-10 | BN-PR-15 |
Processing capacity | 3 Tons | 6 Tons | 10 Tons | 15 Tons |
Reactor size | 1500*3500 mm | 2400*5000 mm | 2600*6600 mm | 2800*8000 mm |
Pyrolysis time | 3-4 h | 4-6 h | 6-8 h | 8-10 h |
Feeding time | 0.5 h | 0.7 h | 1 h | 1 h |
Cooling time | 3-4 h | 4-5 h | 4-5 h | 5-6 h |
Discharging time | 0.5 h | 0.7 h | 1 h | 1 h |
Power needed | 12.5 Kg | 18.6 Kg | 32.5 Kg | 35.5 Kg |
Water consumption | 100 Kg | 300 Kg | 500 Kg | 500 Kg |
Fuel consumption | 30 Kg/h | 40 Kg/h | 60 Kg/h | 90 Kg/h |
Area covered(W*L) | 2.3X11.5 M | 8X22 M | 8X30 M | 8X30 M |
Applicable initial heating fuel | Natural gas/LPG/Diesel/Pyrolysis oil | |||
Noise(dB) | ≤80dB | |||
Working process | Batch type | |||
cooling method | Water cooling | |||
Pyrolysis machine advantage and main technical characteristics
1. Rapid condensers and large cooling area,assure you get much more and higher quality oil. 2. High oil output rate 45%--55% with special catalyst formula and high tech . 3. Double tail-gas recycling and burning system, saving energy. 4. Each set of equipment is equipped with two water seals, which can prevent the return of combustible gas, and is equipped with a pressure alarm device. 5. Q345R boiler plate, high temperature resistance, thickness reaches 16mm-18mm,guarantee 4-7 years service lives. 6. Eco-friendly and no any pollution, environmental protection.
The BNTET renewable energy equipment is a new type of energy-saving and high-efficiency equipment jointly developed by "Heat Technology Energy Company" and "Henan Polytechnic University". The core components of the equipment are all independently researched,designed and produced.
The main products include: pyrolysis furnaces, cracking furnaces, gasification furnaces, carbonization furnaces, incinerators,burners, heat exchangers, oil condensation and recovery devices and their auxiliary equipment.
The main products include: pyrolysis furnaces, cracking furnaces, gasification furnaces, carbonization furnaces, incinerators,burners, heat exchangers, oil condensation and recovery devices and their auxiliary equipment.
BNTET has a powerful R & D and technical team. Before the production of each piece of equipment, the professor team conducts a 1:1 numerical simulation thermal analysis. Through the numerical simulation of multiple fields such as cold and hot flow fields,temperature fields, and component fields, the structure of the furnace and the structure of the burner are optimized to achieve an excellent theoretical numerical design.
BNTET also has 15 years of experience in designing and producing burners. The burner is a core accessory of the pyrolysis furnace,and its combustion efficiency and combustion stability affect the operation of the entire set of equipment. According to the characteristics of the pyrolysis furnace, BNTET has designed and produced a burner specifically for the pyrolysis furnace.Compared with ordinary burners, it can save more than 10% of energy, provide the most suitable air-fuel ratio, save costs for users, and is safer, more energy-efficient, more efficient and more environmentally friendly.
With a strong theoretical and technical team, years of production practice experience, rich engineering installation experience and a customer-oriented work concept, BNTET is looking forward to achieving win-win cooperation with you!
BNTET also has 15 years of experience in designing and producing burners. The burner is a core accessory of the pyrolysis furnace,and its combustion efficiency and combustion stability affect the operation of the entire set of equipment. According to the characteristics of the pyrolysis furnace, BNTET has designed and produced a burner specifically for the pyrolysis furnace.Compared with ordinary burners, it can save more than 10% of energy, provide the most suitable air-fuel ratio, save costs for users, and is safer, more energy-efficient, more efficient and more environmentally friendly.
With a strong theoretical and technical team, years of production practice experience, rich engineering installation experience and a customer-oriented work concept, BNTET is looking forward to achieving win-win cooperation with you!
