Audited Supplier
CN100
New
Customized
65-100mm
70-120psi(5-8.3kgs/Cm2)
5.35kg(Al Body)+5.11kg(Mg)
150-300 Nails
15 Degree Flat Wire Welded Coil Nail
2.5-3.33mm
6.5-7.5mm
Smooth, Ring, Screw
Manufacturer and Trading Company
Available
Coil Nail Gun
Semi-Automatic
Under Pressure
Wood Packing
Pneumatic
Kya
KYA
Carton
417x156x336mm
China
84671900
Product Description
China KYA Pneumatic Coil Nailer-CN100
CN100 Pneumatic Coil Siding Nailer
5.35kgs(11.66lbs) Aluminum body
5.11kgs(11.26lbs) Magnesium Body
DIMENSIONS:417mm x 156mm x 336mm
LOAD CAPACITY:150pcs-300pcs
OPERATING PRESSURE:70-120psi(5-8.3bar)
| Model: | CN100 Pneumatic Coil Nail Gun |
| Air Tool Type: | Air Nailer |
| Tool Diamensions: | 417mmx156mmx336mm(16-3/8"x6-1/8"x13-1/4") |
| Net Tool Weight: | 5.35kgs(11.66lbs) Aluminum Body |
| 5.11kgs(11.26lbs) Magnesium Body | |
| Body Material: | Aluminum Body |
| Magnesium Body | |
| Operate Pressure: | 70-120psi(5-8.3bar) |
| Load Capacity: | 150-300 Nails |
| Fasteners Type: | 15 Degree Flat wire coil nails |
| Fasteners Head Diameter: | 0.256"(6.5mm)-0.295"(7.5mm) |
| Fasteners Shank Diameter: | 0.099"(2.5mm)-0.131"(3.3mm) |
| Fasteners Length: | 2-1/2"(65mm)-4"(100mm) |
| Fasteners Shank Type: | Smooth,Screw,Ring |
CN 100 Suitable nails:
15 Degree Flat wire coil nails
Fasteners Head Diameter:0.256"(6.5mm)-0.295"(7.5mm)
Fasteners Shank Diameter:0.099"(2.5mm)-0.131"(3.3mm)
Fasteners Length:2-1/2"(65mm)-4"(100mm)
Fasteners Shank Type:Smooth,Screw,Ring
CN 100 Pneumatic Tools Features:
Most powerful tool in its class, able to countersink nails into hard oak pallet.
Durable aluminum frame and cylinder cap.
Well balanced when hung on balancer.
Down wards directional exhaust.
Built in silencer to reduce noise level.
Comfortable rubber grip.
Big magazine allows extra nail capacity.
Sub-flooring
Fencing
Wall sheathing and roof sheating
Fastening gypsum board,decorative board and other interior boards.
| No. | Symptom | Problems | Solutions | |
| 1 | Air Leak | Air leak in the cylinder cap when tools don't work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| Air leak in Trigger area when tools don't work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | ||
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | ||
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | ||
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | ||
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
| 3 | Work weakly and sluggishly | 1. Worn or damaged piston o-ring | Check and replace piston o-ring | |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings | Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings | |||
| 3.Dirt in the nozzle | Check and clean the nozzle | |||
| 4 | Tool jams frequently | 1.Damaged or Worn driver (piston unit) | Check and replace driver (piston unit) | |
| 2.Damaged or Worn driver guide (nose) | Check and replace driver guide (nose) | |||
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big | Check and replace driver guide cover | |||
| 5 | Nail can not be shot | 1. Driver (piston unit) can't return to the correct position. | Refer to no. 1 Symptom | |
| 2.Driver guide(nose) can not match magazine well | Check and correct the position between driver guide(nose) and magazine | |||
| 3.Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring | |||
1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China2.Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.
3.Q: About your products, could you do it OEM?
A: Yes, OEM service is available.
4.Q: Do you also provide spare parts of pneumatic tools?
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.
5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.
6.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.
7.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.
8.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
9.Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
10.Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.
1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.
2.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.
3.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time.
4.Free samples: Free samples available at any time.
You can get competitive prices from us because we possess big manufacturing relationship in China.
