Audited Supplier
1250 Galvanizing line
Life Long Repairing Service
1 Year
Coating Production Line
Galvanized
Steel
CE, ISO
New
Flexible
Assembly
ISO, SGS
Automation
Intelligent Manufacturing
Flow Production Line
Product Line
800-1250mm
0.12-0.8mm
150000 Tons
2012
2017
SPCC, Spcd, Spce
508mm/610mm
1100mm/2000mm
20 T
0~200m/Min in The Inlet and Outlet Sections
Moran
Suits Sea Transportation
customized
China
8543300090
Product Description
Second hand/used 150-thousand ton continuous galvanizing line/CGI 
- Brief Introduction
2. Technical Data
| No | Specification | Data |
| 1 | Input material | SPCC, SPCD,SPCE |
| 2 | Strip thickness | 0.12-1.25mm |
| 3 | Strip width | 800-1250mm |
| 4 | Steel coil inner diameter | 508mm/610mm |
| 5 | Steel coil outer diameter: | 1100mm/2000mm |
| 6 | Coil weight | 20 T |
| Finished Products | ||
| 7 | Steel coil inner diameter | 508mm/610mm |
| 8 | Steel coil outer diameter | 1100mm--1500mm |
| 9 | Coil weight | Max 15T |
| 10 | Unit speed | 0~200m/min in the inlet and outlet sections |
| 11 | Process section speed | 0~150m/min; |
| 12 | Threading speed | 30m/min |
| 13 | Unit output | estimated 150,000 tons / year |
| 14 | Unit layout | From the operating side, the production line is from left to right. The total length of the unit is about 218m, the highest point is 9.5m (excluding the cooling tower), and the maximum width is about 13m. |
3. List of Equipment
| NO | Name | QTY | Remark |
| 1 | Loading car and saddle | 2 sets | |
| 2 | uncoiling machine and auxiliary support | 2 sets | |
| 3 | Two roller pinch machine | 5 sets | |
| 4 | sharing machine | 3 sets | |
| 5 | Entrance bracket | 1 sets | |
| 6 | welding machine | 1 set | |
| 7 | Entrance looper | 1 set | |
| 8 | tensioning machine | 6 sets | |
| 9 | centering device | 6 sets | |
| 10 | pre degreasing section | 1 set | |
| 11 | lye cleaning section | 1 set | |
| 12 | Water scrubbing section | 1 set | |
| 13 | wash box | 3 sets | |
| 14 | Dry roller | 8 sets | |
| 15 | Roller brush machine | 4 sets | |
| 16 | hot air sweep | 2 sets | |
| 17 | horizontal annealing furnace | 1 set | |
| 18 | air knife | 1 set | |
| 19 | cooling tower | 2 sets | |
| 20 | Quench tank | 1 set | |
| 21 | tension leveler | 1 set | |
| 22 | Exit looper | 1 set | |
| 23 | coiling machine with auxiliary support | 1 set | |
| 24 | Belt wrapper | 1 set | |
| 25 | Unloading car and saddle | 1 set | |
| 26 | Electric drive system | 1 set | |
| 27 | hydraulic system | 1 set | |
| 30 | Protective gas system | 1 set | Newly added |
| 31 | Bridle roll of the tension leveler | 2sets | Newly added |
| 32 | Dip chrome machine | 1 set | Newly added |
| 33 | Passivation drying oven | 1 set | Newly added |
| 34 | Passivation drying and cooling device | 2 sets | Newly added |
| 35 | 500kw generator | 1 set | Newly added |
| 36 | Skin pass mill | 1 set | Newly added |
| 37 | Zinc pot | 1 set | Newly added |
| 38 | Electrolytic degreasing section | 1 set | Newly added |
| 39 | Zinc coating equipment | 1set | (as optional) |
