Audited Supplier
CLW5040XJHV6
Vehicle After-Sales Service
12 Month
Ambulance
ISO9000, CCC
Manual
Diesel
Euro 4
3-8m
With Medical Equipment
160-210hp
Single
New
CLW
Bulk Ship, RO-RO, Container
5980X2430X2760
Suizhou China
Product Description
4X2 4WD Ambulance Car Medical Truck with Automatic Boarding Stretcher and Slide Rail Infusion Rack
Detailed configuration table of the square cabin trim
Detailed configuration table of the square cabin trim| Description of interior configuration | ||
| order number | technical requirement | remarks |
| Part I Chassis section description | ||
| 1 | wins Class II chassis | standard configuration |
| 2 | Engine: F1CE8481K | standard configuration |
| 3 | Carrying imported medical prescription boxes | order |
| 4 | Displacement (L): 3.0 | standard configuration |
| 5 | Transmission: a six-speed manual operation | standard configuration |
| 6 | National six emission standards | standard configuration |
| 7 | Body size (mm): 599020352700-3000 | standard configuration |
| 8 | Total mass: 4,490 | standard configuration |
| 9 | Preparation mass: 3250 (the lightest in China) | standard configuration |
| 10 | Wheelbase (mm): 3,300 | standard configuration |
| 11 | Broaden the rear bridge | standard configuration |
| 12 | Rear suspension shock suspension | standard configuration |
| 13 | Broaden the rearview mirror | standard configuration |
| 14 | Daytime running lights | standard configuration |
| 15 | Double pressure bracket | standard configuration |
| Part two: the ambulance modification configuration requirements | ||
| 1 | The cab is installed with the original factory heating and cooling air conditioning | (Original car) |
| 2 | Driving air conditioning 12V air duct type | (1 Set) |
| 3 | Install ventilation system in medical cabin | (1 Set) |
| 4 | The medical cabin is installed with the original factory air conditioning | (1 Set) |
| 5 | Field lights on the left and right sides of the roof | Two cups |
| 6 | Field field lighting are installed on the rear of the roof | Two cups |
| 7 | Level 2 adjustable LED long ultra-thin lighting (4), which is perfectly combined with the roof interior, and easy to disassembly and repair. Injection lamp (2), ultraviolet disinfection lamp (1) | (1) |
| 8 | Central power supply distribution system | (1 Set) |
| 9 | Intelligent power management system (manage the whole vehicle electricity consumption, automatic charging, and ensure that the engine battery has sufficient power to start the vehicle at any time) | (1 Set) |
| 10 | The medical compartment is equipped with an on-board inverter | (1 Set) |
| 11 | Microcomputer central controller in the cab | (1 Set) |
| 12 | 10m long mobile cable, connect the 220V external power socket | (1 Set) |
| 13 | 220V socket in the medical compartment | (6) |
| 14 | 12V socket in the medical compartment | (3) |
| 15 | emergency alert system | (1 Set) |
| 16 | The cab is equipped with a handheld alarm and alarm light integrated controller | (1 Set) |
| 17 | Install an alarm on the roof: the standard ambulance alarm sound | (1 Set) |
| 18 | The long row of blue double flashing alarm lights is installed in the front of the roof | (1) |
| 19 | High volume car loudspeaker | (1 Set) |
| 20 | Install the LED blue alarm lights on the front side of the car body | (2) |
| 21 | Blue flashing alarm lights are installed on the rear and left and right sides of the roof | (4) |
| 22 | Outfield lights are installed on the left and right sides and rear of the body | standard configuration |
| 23 | Hands-free intercom system between the cab and the medical cabin | (1 Set) |
| 24 | The cab and medical compartment are equipped with sealed partition with push-pull transparent observation window | |
| 25 | One set of medical combination cabinet (with drawing drawer and storage cabinet) is installed at the rear of the middle partition, reverse folding seat. | A set |
| 26 | The standard seat for doctor care (3 point belt) and long seat for family care (2 point belt) are installed on the right side of the medical cabin | 1/2 |
| 27 | On the left side of the medical cabin, 10-liter oxygen cylinders (2) and storage cabinet are equipped with 1 manual oxygen switch, which can be quickly converted according to the use of 2 oxygen cylinders, with 2 pressure reducing valves, 2 oxygen terminal interfaces, 1 humidified bottle and 1 oxygen conversion head. | standard configuration |
| 28 | The medical cabin box is made of new aluminum alloy | order |
| 29 | Medical cabin interior decoration: including the walls and doors on both sides of the medical cabin (the middle door is the side sliding door, the tail door is 180 degrees double open), light insulation material for the interior roof, flame retardant, ultraviolet protection, impact resistant polymer composite material, a vacuum forming interior to prevent deformation and mildew. | order |
| 30 | The floor uses imported gray floor to resist acid, alkali, fire prevention, anti-skid, all around the raised package edge to prevent the accumulation of dust and anti-skid, convenient washing. Broken edge transition package corner, avoid bump injury. | standard |
| 31 | The heating system is provided in the medical cabin | standard |
| 32 | A cabinet combination of medical cabinet and instrument cabinet is installed on the left side of the medical cabin | (1 Set) |
| 33 | The movable equipment bracket is installed on the left side of the medical cabin (it can be used to install the ECG negative pressure defibrillator, attractor and ventilator) | (1 Set) |
| 34 | The rear of the medical cabin is equipped with a shovel cabinet and a set of shovel stretcher | (1 Set) |
| 35 | The top of the medical cabin can be sliding infusion holder and two safety handrails | standard configuration |
| 36 | 2 KG fire extinguisher and support frame (2 pieces) | standard configuration |
| 37 | A set of high-end automatic car stretcher is installed in the medical cabin | (1 Set) |
| 38 | A customized negative pressure system is installed in the medical cabin | (1 Set) |
| 39 | The appearance part, the body and the top according to the user requirements to make identification | order |
| 40 | The tail door is equipped with lengthened and widened pedals to facilitate the medical staff to pass up and down | (1 Set) |
Company information
1. ChengLi Special Automobile Co.,Ltd, which was appointed by the Development and Reform Committee of China, is a famous manufacturer producing all kinds of special trucks for municipal & environmental construction, virescence, petrol & medicals, container, and semi-trailer. Brands registered include CLW .Our company has independent export right and has a mount of clients in overseas. Our leading varieties include more than 100 types of trucks and related products such as water truck, garbage truck,sewage suction truck, fuel tank, high-altitude operation truck, truck mounted crane, dump truck, LED advertising truck,LPG truck/trailer,LPG filling tank, van truck, semi-trailer, fire engine, refrigerator truck, tractor, bulk cement truck, chemical liquid truck, concrete mixer truck, and others. 2.Our company has solid technology, flawless inspection, advanced equipment, reliable quality and flexible modes of operation. What's more, our company has roundly passed ISO9001:2000 and CCC (China Compulsory Certification) certifications. Series trucks of Cheng Li have procured remarkable achievements interiorly, especially from the investment in South Suburb Cheng Li Automobile Industry Park.
3.Quality control:our company truck pass ISO,3C,ASME certification.
our factory have the quality Quality Inspection Department.before sending truck for facotry ,our quality inspection department will check the truck carefully.
4. Export market: Africa,Asia,South America,Pacific and so on.
5.Our company cooperate with famous chasis manufacturers,such as DONGFENG,SHINOTRUK,FOTON, JAC,JMC ,SHACMAN,FAW and etc.
Exporting
As Manufacturer, We Have Our Own License Of Import And Export.We Have Successfully Exported To Ghana, Sudan, Nigeria,
Angola ,Tajikistan, Namibia, Burma, Korea, Iran,American,Afghanistan,Iraq And Some Other Countries.The Development Of Our
Factory Is Getting Better And Better.
After Sales Service
Answer and solve your questions and consult within 24 hours
Overseas job site service available
One year guarantee about three key parts(axle, engine, transmission).Other spare parts could be supplied by cost price.
Other services:
1.All trucks and trailers are new and be customized to meet all your requirement.
2. All trucks and trailers are with 12 months quality guarantee.
3. CKD and SKD are available.
4. Technical support are provided.
FAQ
1.Our price term: FOB Shanghai as common, other port is also acceptable.
2. Our Payment term: T/T, 30% deposit after order confirmation, 70% balance should be paid before delivery.
3. Delivery time: the delivery time is 20-30 days as common, the exact delivery time depends on the order and the current
production condition.
If you are interested in our trucks, pls contact me, I will send our best quotation to you.
