Audited Supplier
NYP High Viscosity Rotor Pump
Unlimited Times
One Year
Internal Engaged
Straight Tooth
Cycloid
Electric
Food Processing
CE, ISO, RoHS
Steel,SS304,SS316,Stainless Steel
Ye3 Normal,Explosion-Proof Motor
0.5-300m³/H
0-1.6MPa
15-200mm
50-1500rpm
1-300000cst
380V or as Require
50Hz,60Hz
200ºC
40cr, SS304, SS316, Stainless Steel, etc
yuanhan
Angle Steel Frame Supports Seaworthy Wooden Case
0.1-500m3/h
China
8413603190
Product Description
High Viscosity Stainless Steel Food Grade Honey Rotor Pump Internal Engaged gear Pump
Product Description
BRIEF INTRODUCTION
NYP series internal gear pump is a kind of new positive displacement pump, and is desiened according to the diferent field's requirements of petroleum, chemical industry, paint grease, medicine, foodstuff and so on. It widely applies to a variety ofmediums with different property and viscosity because of special structure and selected different pump' s materials.
Proper medium temperature:-10ºC~200ºC ;
Proper medium viscosity:1.0cSt-300,000cSt.
Performance data:
Viscosity: 1.0~ 300000 cst,
Flow range: 1~ 500 m³/h;
Maximum pressure: 2.0 Mpa;
Max. Temperature: 200ºC
This is part of the parameters, subject to the actual order.
Features:
The pumps are mainly composed of internal and external rotor, shaft, casing, front cover, seal, bearing etc.The pump's seal adopts packing seal or mechanical seal, when the delivered medium is high temperature, high viscosity orstrong corrosion, packing seal is adopted.
When the delivered medium is easy crystalline, we can design the heat preservation acket on casine and front cover to metthe medium with steam when working.
The pump can be also fitted with the safety valve.
The pump set is composed of pumpmotor and baseplate.
seen from the extension end of the spindle to the pump, it rotates clockwise.
ADVANTAGES:
Steady delivery without pulsation,little vibration and low noise
Outstanding self-priming ability.
The pump can deliver the varied corrosion mediums if the proper material of parts selected. n addition, the working
temperature can reach 200°C.
The same rotary direction ofinternal rotor and outside rotor results in little wear and long operation life.
The pump's flow capacity can be changed through adjusting the speed.
Specially suited to deliver high viscosity medium.
Product detail:
Equipment Display:
Packaging & Shipping:
FAQ:
Product Description
BRIEF INTRODUCTION
NYP series internal gear pump is a kind of new positive displacement pump, and is desiened according to the diferent field's requirements of petroleum, chemical industry, paint grease, medicine, foodstuff and so on. It widely applies to a variety ofmediums with different property and viscosity because of special structure and selected different pump' s materials.
Proper medium temperature:-10ºC~200ºC ;
Proper medium viscosity:1.0cSt-300,000cSt.
Performance data:
Viscosity: 1.0~ 300000 cst,
Flow range: 1~ 500 m³/h;
Maximum pressure: 2.0 Mpa;
Max. Temperature: 200ºC
| Model | Nominal Size (mm) | Dislacement ( L/100rev) | Viscosity (cSt) | Speed (r/min) | Diferential Pressure(MPa) | Connection | |||
| 0.4 | 0.6 | 0.8 | 1.0 | ||||||
| Power(kW)/Capacity(L/min) | |||||||||
| NYP0.78 | 15 | 0.78 | 20 | 1390 | 0.17/9.3 | 0.23/9.0 | 0.28/8.8 | 0.32/8.6 | Thread |
| 60 | 1390 | 0.18/9.5 | 0.24/9.2 | 0.28/9.0 | 0.33/8.9 | ||||
| 200 | 1390 | 0.31/10.4 | 0.35/10.2 | 0.39/10.0 | 0.43/9.9 | ||||
| 600 | 1390 | 0.39/10.4 | 0.44/10.3 | 0.48/10.3 | 0.52/10.2 | ||||
| 2000 | 910 | 0.23/6.8 | 0.27/6.8 | 0.30/6.8 | 0.33/6.7 | ||||
| 6000 | 720 | 0.24/5.4 | 0.31/6.1 | 0.38/6.8 | 0.40/6 | ||||
| NYP2.3 | 25 | 2.3 | 20 | 400 | 0.38/28.4 | 0.49/27.5 | Thread | ||
| 60 | 1400 | 0.59/29.2 | 0.65/28.8 | ||||||
| 200 | 1400 | 0.61/30.0 | 0.72/29.6 | ||||||
| 600 | 1400 | 0.92/31.9 | 096/31.7 | ||||||
| 2000 | 910 | 0.61/19.9 | 0.68/19.7 | ||||||
| 5000 | 720 | 0.77/16.32 | 0.83/16.2 | ||||||
| NYP3.6 | 25 | 3.6 | 20 | 1450 | 0.69/46.7 | 0.94/45.9 | 1.18/45 | 1.44/43.4 | Thread |
| 60 | 1450 | 0.84/47.5 | 1.09/46.7 | 1.37/45.9 | 1.57/44.7 | ||||
| 200 | 1450 | 1.06/49.7 | 1.31/49.2 | 1.56/48.8 | 1.79/48.3 | ||||
| 600 | 1450 | 1.45/49.9 | 1.61/49.6 | 1.77/49.3 | 1.93/49 | ||||
| 2000 | 960 | 1.28/34.0 | 1.41/33.8 | 1.54/33.7 | 1.65/33.6 | ||||
| 6000 | 640 | 1.08/23.0 | 1.18/22.9 | 1.28/22.9 | 1.37/22.8 | ||||
| 20000 | 583 | 1.22/20.5 | 1.24/20 | 1.25/20.4 | 1.38/20.3 | ||||
| 60000 | 455 | 0.84/16.3 | 0.91/16.2 | 0.98/16.1 | 1.01/16 | ||||
| NYP7.0 | 40 | 7.0 | 20 | 1450 | 1.36/98.1 | 1.8/96 | 2.0/94.7 | 2.4/93 | Flange |
| 60 | 1450 | 1.45/99 | 1.9/97 | 2.2/96.4 | 2.6/95 | ||||
| 200 | 1450 | 1.62/99.8 | 2.0/98 | 2.3/97.5 | 2.7/97 | ||||
| 600 | 960 | 1.4/62 | 1.6/65 | 1.8/64.5 | 2.0/64 | ||||
| 2000 | 960 | 1.8/67 | 2.0/66 | 2.3/65 | 2.6/65 | ||||
| 6000 | 640 | 1.5/44.5 | 1.7/44 | 1.8/44 | 2.0/44 | ||||
| 20000 | 583 | 1.6/40.5 | 1.9/40 | 2.1/40 | 2.2/4 | ||||
| 60000 | 455 | 1.46/31.5 | 1.8/31 | 1.9/31 | 2.0/31 | ||||
| NYP24 | 50 | 24 | 20 | 720 | 1.8/165 | 2.3/16.1 | 2.8/158 | 3.4/155 | Flange |
| 60 | 720 | 2.0/166 | 2.6/164 | 3.1/162 | 3.7/158 | ||||
| 200 | 610 | 1.9/143 | 2.5/141 | 3.0/139 | 3.5/136 | ||||
| 600 | 541 | 2.1/127 | 2.6/125 | 3.0/124 | 3.5/122 | ||||
| 2000 | 475 | 2.2/112 | 2.6/111 | 2.9/110 | 3.4/109 | ||||
| 6000 | 357 | 2.0/85 | 2.3/84 | 2.6/83 | 2.9/83 | ||||
| 20000 | 303 | 1.9/72 | 2.2/72 | 2.4/72 | 2.6/71 | ||||
| 60000 | 228 | 1.6/54 | 1.8/54 | 2.0/54 | 2.3/54 | ||||
| NYP50 | 50 | 50 | 20 | 720 | 4.3/362 | 5.8/355 | 6.9/348 | 8.1/340 | Flange |
| 60 | 720 | 4.7/364 | 6.2/358 | 7.3/352 | 7.5/346 | ||||
| 200 | 610 | 4.6/309 | 5.9/304 | 6.9/300 | 8.0/294 | ||||
| 600 | 541 | 4.9/275 | 6.0/271 | 6.8/268 | 78/264 | ||||
| 2000 | 475 | 5.0/243 | 5.9/238 | 6.6/237 | 7.6/235 | ||||
| 6000 | 357 | 4.1/184 | 4.9/182 | 5.3/181 | 6.2/180 | ||||
| 20000 | 303 | 3.8/157 | 4.6/156 | 5.1/155 | 5.6/155 | ||||
| 60000 | 228 | 3.1/119 | 3.7/118 | 4.0/118 | 4.5/118 | ||||
| NYP80 | 80 | 80 | 20 | 615 | 5.2/471 | 6.9/461 | 8.5/451 | 10.0/433 | Flange |
| 60 | 615 | 5.5/474 | 7.2/465 | 8.8/457 | 10.5/448 | ||||
| 200 | 544 | 5.7/421 | 7.2/414 | 8.6/408 | 10.1/401 | ||||
| 600 | 479 | 6.0/37 | 7.3/367 | 8.5/36 | 9.8/356 | ||||
| 2000 | 417 | 6.5/326 | 7.7/322 | 8.9/319 | 10.1/315 | ||||
| 6000 | 305 | 5.6/239 | 6.6/237 | 7.5/326 | 8.4/233 | ||||
| 20000 | 228 | 5.5/180 | 6.4/179 | 6.9/178 | 7.7/177 | ||||
| 50000 | 188 | 5.5/149 | 6.1/149 | 6.7/149 | 7.2/148 | ||||
| NYP110 | 80 | 110 | 20 | 615 | 6.7/660 | 9.2/647 | 11.2/634 | 13.6/622 | Flange |
| 60 | 615 | 6.9/664 | 9.4/652 | 11.5/642 | 13.9/631 | ||||
| 200 | 544 | 7.1/589 | 9.3/580 | 11.0/573 | 13.2/563 | ||||
| 600 | 479 | 7.3/521 | 9.5/514 | 11.1/508 | 13.1/502 | ||||
| 2000 | 417 | 7.7/455 | 9.7/450 | 11.0/447 | 12.7/442 | ||||
| 6000 | 305 | 6.9/335 | 8.4/332 | 9.4/331 | 10.6/328 | ||||
| 20000 | 228 | 6.3/251 | 7.5/250 | 8.2/249 | 9.2/248 | ||||
| 60000 | 188 | 6.2/209 | 7.1/208 | 7.6/208 | 8.5/207 | ||||
| Model | Nominal Size (mm) | Dislacement ( L/100rev) | Viscosity (cSt) | Speed (r/min) | Diferential Pressure(MPa) | Connection | |||
| 0.4 | 0.6 | 0.8 | 1.0 | ||||||
| Power(kW)/Capacity(L/min) | |||||||||
| NYP160 | 100 | 160 | 20 | 600 | 8.9/930 | 12.1/916 | 15.3/902 | 17.5/888 | Flange |
| 60 | 600 | 9.4/935 | 12.6/922 | 15.8/910 | 19.0/898 | ||||
| 200 | 550 | 12.3/866 | 15.3/859 | 18.3/852 | 21.3/845 | ||||
| 600 | 480 | 10.2/754 | 12.8/747 | 15.4/740 | 18.0/737 | ||||
| 2000 | 355 | 9.1/560 | 11.1/556 | 13.0/552 | 15.1/548 | ||||
| 6000 | 319 | 10.0/505 | 11.7/502 | 13.5/500 | 15.2/497 | ||||
| NYP220B | 100 | 220 | 20 | 430 | 8.8/902 | 11.9/880 | 15.0/858 | 18.0/836 | Flange |
| 60 | 430 | 9.0/909 | 12.0/890 | 15.0/87 | 18.0/852 | ||||
| 200 | 355 | 8.5/753 | 11.1/739 | 13.7/726 | 16.3/731 | ||||
| 600 | 320 | 9.4/682 | 11.8/671 | 14.1/660 | 16.5/649 | ||||
| 2000 | 254 | 9.1/544 | 11.0/537 | 13.0/530 | 15.1/523 | ||||
| 6000 | 244 | 10.1/483 | 11.9/478 | 13.6/473 | 15.4/468 | ||||
| 20000 | 160 | 9.1/347 | 10.5/345 | 11.9/343 | 13.3/341 | ||||
| 60000 | 117 | 8.4/256 | 9.7/255 | 10.4/254 | 11.4/253 | ||||
| NYP320B | 125 | 320 | 20 | 430 | 13.0/1306 | 18.0/1270 | 22.0/1235 | 26.0/1200 | Flange |
| 60 | 430 | 13.0/1316 | 18.5/1285 | 22.0/1255 | 26.5/1225 | ||||
| 200 | 11.8/1091 | 15.5/1068 | 19.1/1046 | 22.8/1024 | |||||
| 600 | 30 | 13.2/987 | 16.5/968 | 19.7/950 | 22.9/932 | ||||
| 2000 | 284 | 14.2/881 | 17.4/867 | 20.6/854 | 23.8/841 | ||||
| 6000 | 222 | 13.7/693 | 16.2/684 | 18.7/675 | 21.2/666 | ||||
| 20000 | 168 | 13.2/529 | 15.2/524 | 17.3/522 | 19.4/519 | ||||
| 60000 | 125 | 12.0/397 | 13.7/396 | 15.3/395 | 16.9/394 | ||||
| NYP440 | 150 | 440 | 20 | 14.7/1473 | 19.2/1441 | 25.6/1409 | 40/1378 | Flange | |
| 60 | 30 | 15.1/1483 | 19/1456 | 26/1430 | 29.8/1401 | ||||
| 200 | 320 | 14.0/1326 | 17.4/1302 | 23.2/1278 | 27/1255 | ||||
| 600 | 270 | 14.1/1122 | 17.1/1104 | 21.7/1086 | 25.2/1069 | ||||
| 2000 | 230 | 14.7/970 | 17.9/958 | 21/945 | 24.5/932 | ||||
| 6000 | 200 | 15.1/846 | 17.5/839 | 20.8/832 | 23.9/825 | ||||
| 20000 | 145 | 13.2/620 | 16/615 | 17.9/610 | 20.2/605 | ||||
| 60000 | 110 | 12.4/473 | 14/471 | 16.2/469 | 18.3/467 | ||||
| NYP650 | 125 | 650 | 20 | 315 | 19.0/1921 | 26.0/1857 | 33.0/1794 | Flange | |
| 60 | 315 | 20.0/1940 | 26.4/1886 | 33.2/1832 | |||||
| 200 | 284 | 17.9/17 5e | 24.0/1711 | 30.4/1666 | |||||
| 600 | 253 | 17.6/1572 | 22.7/1531 | 28.9/1500 | |||||
| 2000 | 196 | 15.7/1225 | 20.6/1201 | 24.5/1176 | |||||
| 6000 | 160 | 16.0/1008 | 19.7/993 | 22.6/978 | |||||
| 20000 | 117 | 13.6/745 | 16.5/738 | 19.1/731 | |||||
| 60000 | 100 | 15.0/645 | 17.2/643 | 19.5/640 | |||||
| NYP730 | 150 | 730 | 20 | 315 | 21.5/2135 | 29.4/2058 | 37.3/1980 | Flange | |
| 60 | 315 | 22.4/2157 | 29.8/2090 | 37.3/2026 | |||||
| 200 | 280 | 19.6/1928 | 26.7/1874 | 33.5/1820 | |||||
| 600 | 245 | 19.6/1696 | 25.1/1652 | 31.2/1611 | |||||
| 2000 | 200 | 18.7/1394 | 23.3/1363 | 28.5/1331 | |||||
| 6000 | 170 | 19.2/1195 | 23.3/1175 | 27.9/1155 | |||||
| 20000 | 125 | 17.0/888 | 20.1/878 | 23.3/868 | |||||
| 60000 | 100 | 16.8/720 | 19.5/717 | 22.3/713 | |||||
| NYP1670 | 200 | 1670 | 20 | 250 | 38.0/3852 | 52.0/3690 | 66.0/3529 | Flange | |
| 60 | 250 | 40.0/3900 | 54.0/3763 | 68.0/3626 | |||||
| 200 | 225 | 37.5/3535 | 50.0/3424 | 62.5/3313 | |||||
| 600 | 195 | 37.0/3079 | 48.0/2990 | 58.6/2900 | |||||
| 2000 | 160 | 35.0/2547 | 44.0/2485 | 53.0/2422 | |||||
| 6000 | 135 | 34.6/2177 | 42.0/2138 | 50.0/2100 | |||||
| 20000 | 112 | 35.0/1830 | 41.5/1810 | 48.0/1972 | |||||
| 60000 | 85 | 36.0/1405 | 35.7/1400 | 40.6/1790 | |||||
This is part of the parameters, subject to the actual order.
Features:
The pumps are mainly composed of internal and external rotor, shaft, casing, front cover, seal, bearing etc.The pump's seal adopts packing seal or mechanical seal, when the delivered medium is high temperature, high viscosity orstrong corrosion, packing seal is adopted.
When the delivered medium is easy crystalline, we can design the heat preservation acket on casine and front cover to metthe medium with steam when working.
The pump can be also fitted with the safety valve.
The pump set is composed of pumpmotor and baseplate.
seen from the extension end of the spindle to the pump, it rotates clockwise.
ADVANTAGES:
Steady delivery without pulsation,little vibration and low noise
Outstanding self-priming ability.
The pump can deliver the varied corrosion mediums if the proper material of parts selected. n addition, the working
temperature can reach 200°C.
The same rotary direction ofinternal rotor and outside rotor results in little wear and long operation life.
The pump's flow capacity can be changed through adjusting the speed.
Specially suited to deliver high viscosity medium.
Product detail:
Packaging & Shipping:
FAQ:
