Audited Supplier
XFLJ--SL-15
1 Year
<15 Years
CE, ISO
380V
Horizontal
Q345r
Normal Pressure
<650 Deg C
Pyrolysis Oil, Fuel Oil, Natural Gas, Syn Gas, LPG
Hot Air Circulation
<20mm
Nitrogen Blowing
<100kw/H
14000X2400X4000mm
40000X4000X7000mm
Xingfu
Exported Standard
15t/day
Qingdao, China
8419409090
Product Description
Fully Continuous Waste Plastic Pyrolysis Plant
Performance Feature
Technological Process
Remark: This parameter is just for reference. Size change caused by design improvement will not inform customers specially. Please refer to documents enclosed with products.
Product Recovery Rate
Fuel oil: 40-45%
Carbon residue: 32-36%
Steel wire: 14-16%
Syn gas: 5-8%
Certifications
WELCOME to Qingdao,Check the running 15t/day fully continuous,8t/day semi continuous
and the tyre oil distillation plant.
If you need other information,pls contact me,we will talk more details. Best Regards,Raymond
Performance Feature
- Internal screw rotatory pyrolysis. No coking.
- Hot melt processing in advance, process generated HCL specially, more environmental protection.
- Adopt multilevel cooling design, to get more fuel oil.
- Hot air heat, cooperated with low temperature pyrolysis catalyst, extend working life of plant.
- Enclosed production all the way, no leakage and no dust loss, environmental protection.
- Exhaust gas multistage processed, gas discharge reach European Standard level.
Technological Process
- Waste tyre and medical waste sent into fuel preheater by conveyor to melt. Process generated HCL specially.
- Melted fuel continuously sent into reactor, and finish pyrolysis under low pressured catalyst.
- After generated gas during pyrolysis separates in gas-liquid separator, liquify in condenser and get fuel oil. After fixed bed second catalyst and dewaxing , can get the fuel oil with high quality.
- Carbon residue after pyrolysis output continuously by cooling conveyor, and made to be carbon rod as fuel.
- Flammable gas goes into exhaust gas treatment tank to desulfur, then extracted by vacuum pump and enter into water sealed tank, sent to hot air stove to burn.
| Item | Type | XFLJ--SL--15 | XFLJ--SL--30 |
| Capacity/24h | 15T | 30T | |
| Working temp. | ≤650° | ||
| Fuel | Fuel oil, natural gas, liquified gas | ||
| Heating way | Hot air circulation heating | ||
| Fuel request | Waste plastic, medical waste and household waste | ||
| Working pressure | Normal pressure | ||
| Inflaming retarding way | Nitrogen purging | ||
| Consumption | 200 kg | 400 kg | |
| Size | 14000 × 2400 × 4000(mm) | 28000 × 2400 × 4000(mm)×2 | |
| Total power | 90 kw | 170 kw | |
| Power consumption | 80 kw/h | 150 kw/h | |
| Floor space | 40000 mm × 4000 mm | 40000 mm × 9000 mm | |
| Highest point of installation | 7000 mm | 7000 mm | |
Product Recovery Rate
Fuel oil: 40-45%
Carbon residue: 32-36%
Steel wire: 14-16%
Syn gas: 5-8%
Certifications
WELCOME to Qingdao,Check the running 15t/day fully continuous,8t/day semi continuous
and the tyre oil distillation plant.
If you need other information,pls contact me,we will talk more details. Best Regards,Raymond
