Audited Supplier
CXGJ-10C
Whole Life
1 Year
16-1200mm
<900kg
Pipe Hydrostatic Testing
10MPa
1
Electronic Load
Static Load
Digital
Computer Control
100-500Kg
AC220V
by Others
Pipe Hydrostatic Testing Machine
PE PP-R PVC
D16mm- D1000mm-1200mm
1-40
0.4~10.000MPa
0—9999h
1s
Chenji or OEM ODM
Plywood Case
1500*800*1200
Jinan or Others
Product Description
CXGJ-10C Pipe hydrostatic Pressure Burst testing machine for PE PP-R PVC 16mm-1200mm
.Application
The machine is designed and manufactured according to GB/T6111 Thermoplastics pipes for the conveyance of fluids ----Resistance to internal pressure----Test method and GB/T15560Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids . It is suitable to determine the pressure-resisting broken time or the maximum pressure value of instantaneous blast of thermoplastic pipes and compound pipes (such as PP-R ,PP-B ,PP-A ,PE ,PE-X ,PVC ,PVC-U and PVC-C ) under long-term constant internal pressure and temperature .It is indispensable for manufacturers of plastic pipes and testing institutions .
The machine meets the following standards :
.Feature
1.1 This instrument is used for testing a certain range of internal pressure in a long period of time of plastic pipes.
1.2 The instrument consists of a pressure host, a pressure station, a water tank, a temperature control system and a computer software system.
Main Frame: It consists of pressure micro control parts, automatic filling pressure and electric discharge pressure parts, pressure micro control part adopts the microcomputer MCU control; equipped with high resolution, high speed of ∑ - delta 16-bit adc chip, real-time communication and computer; and it can automatically fill and relief pressure according to the situation of pressure.
Pressure Station: Its main function is to provide pressure to the main frame, the requirement of lower limit pressure of pressure station requirement must be higher than all tested specimen. The plunger pump of the station is made in the United States (large flow, low noise, high pressure, free maintenance).
Water Tank: It consists of electric opening part, self-circulation part, heating part, automatic water filling part and insulation part.
Temperature Control System: Accurately control the temperature of the water tank, temperature display, set temperature individually. It can control the liquid level of tank at a reasonable position, at the same time it can also guarantee the temperature.
Software System: By connecting with RS232 serial interface to the pressure on the host, it can provide the parameters setting, calibration, pressure relief, zero, amplitude modulation, drawing the test, test records and print test reports and other functions.
3.1 Ambient Temperature: 10ºC~40ºC;
3.2 Ambient Temperature: 30%-80%;
3.3 Vibration-free,no corrosive medium environment;
3.4 Install and adjust the instrument to level on a solid foundation;
3.5 No strong electromagnetic interference and no strong wind resistance;
3.6 A indoor exhaust system is needed to prevent the instrume
4.Main specifications
Configuration table
.Application
The machine is designed and manufactured according to GB/T6111 Thermoplastics pipes for the conveyance of fluids ----Resistance to internal pressure----Test method and GB/T15560Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids . It is suitable to determine the pressure-resisting broken time or the maximum pressure value of instantaneous blast of thermoplastic pipes and compound pipes (such as PP-R ,PP-B ,PP-A ,PE ,PE-X ,PVC ,PVC-U and PVC-C ) under long-term constant internal pressure and temperature .It is indispensable for manufacturers of plastic pipes and testing institutions .
The machine meets the following standards :
| GB/T6111-2018 | Test method for internal pressure resistance of thermoplastic pipes for liquid transportation |
| GB/T15560-95 | Hydraulic instantaneous burst and pressure test method of plastic pipes for fluid transportation |
| IS01167-2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids --Determination of the resistance to internal pressure -- Part 1: General method |
| ASTM D1598-2004 | Pipe, Plastic, Under Constant Internal Pressure, Time-to-Failure of (No S/S Document) |
| ASTM D1599 | Standard Test Method forResistance to Short-Time Hydraulic Pressure of PlasticPipe, Tubing, and Fittings1 |
.Feature
1.1 This instrument is used for testing a certain range of internal pressure in a long period of time of plastic pipes.
1.2 The instrument consists of a pressure host, a pressure station, a water tank, a temperature control system and a computer software system.
Main Frame: It consists of pressure micro control parts, automatic filling pressure and electric discharge pressure parts, pressure micro control part adopts the microcomputer MCU control; equipped with high resolution, high speed of ∑ - delta 16-bit adc chip, real-time communication and computer; and it can automatically fill and relief pressure according to the situation of pressure.
Pressure Station: Its main function is to provide pressure to the main frame, the requirement of lower limit pressure of pressure station requirement must be higher than all tested specimen. The plunger pump of the station is made in the United States (large flow, low noise, high pressure, free maintenance).
Water Tank: It consists of electric opening part, self-circulation part, heating part, automatic water filling part and insulation part.
Temperature Control System: Accurately control the temperature of the water tank, temperature display, set temperature individually. It can control the liquid level of tank at a reasonable position, at the same time it can also guarantee the temperature.
Software System: By connecting with RS232 serial interface to the pressure on the host, it can provide the parameters setting, calibration, pressure relief, zero, amplitude modulation, drawing the test, test records and print test reports and other functions.
2 Application
The instrument is widely used in the internal pressure test of all kinds of plastic pipes. It is the ideal testing instrument for construction industry, Plastic pipe producers, national testing sectors and the scientific research sectors.3 Working Conditions
Following conditions must be satisfied to conduct a test:3.1 Ambient Temperature: 10ºC~40ºC;
3.2 Ambient Temperature: 30%-80%;
3.3 Vibration-free,no corrosive medium environment;
3.4 Install and adjust the instrument to level on a solid foundation;
3.5 No strong electromagnetic interference and no strong wind resistance;
3.6 A indoor exhaust system is needed to prevent the instrume
4.Main specifications
| Test pipe diameter range | D16~D800 | |
| Maximum test pressure | 10MPa | |
| Test station | 5 | |
| control mode | Industrial Touch Screen computer | |
| Data preservation | Each circuit has the power-off data protection function, which can be recovered after power on | |
| Time | Timing time | 0~9999h 59min |
| Timing accuracy | ±0.1% | |
| time resolution | 1s | |
| Minimum setting unit | min | |
| Pressure | Pressure control range | 0.4~10MPa |
| Pressure control accuracy | -1%~ +2% | |
| Pressure display resolution | 0.001MPa | |
| measuring range | 4%~100%FS | |
| Allowable error limit of indication | Within 1% of the indicated value | |
| Supply Voltage | Main machine/Pressure station | 220V,50hz/380V,50Hz |
| Outside Size of Main machine | 680*680*1900mm | |
| Outside Size of Pressure station | 770*480*920mm | |
Configuration table
| name | Origin and use | unit |
| Solenoid valve | USA Parker | Workstation* 2 |
| Pressure transmitter | UK GEMS | Workstation*1 |
| Electric contact pressure gauge | domestic | 1 |
| High pressure piston pump | Import | 1 |
| Single station accumulator | domestic | Workstation*1 |
| Accumulator of pressure station | domestic | 1 |
| Short high pressure hose | 100 ºC and 63 MPa, | Workstation*1 |
| ong high pressure hose Subject | 100 ºC and 63 MPa, | Workstation*1 |
| PC | LEVONO | 1 |
