Audited Supplier
1. The OMP-1 is a micro-nano polymer plugging agent specifically designed for OBM, which effectively reduces the permeability of the filter cake, minimizes HTHP filtration, and enhances shale borehole stability. The micro-nano particles of OMP-1 are extremely small in size, enabling them to penetrate into frictional gaps, fill grooves and cracks, thereby reducing surface roughness and efficiently decreasing friction. Moreover, the long chain structure of OMP-1 contains both hydrophilic and hydrophobic groups that exhibit emulsifying properties. This characteristic aids in improving the demulsification voltage of OBM while contributing to its overall system stability. The recommended dosage ranges from 7.0 to 15.0 ppb.
| Items | Specifications |
| Appearance | Dark red liquid |
| Particle size D50,μm | ≤ 5.0 |
| FLHTHP reduction rate,% | ≥ 30.0 |
| Flash point, ºC | ≥ 100.0 |
| Density, g/cm3 | 0.82±0.05 |
- It can effectively improve the quality of mud cake, and reduce the high temperature and high pressure filtration;
- It is helpful to increase the demulsification voltage of OBM, which is helpful to the stability of oil-based drilling fluid system;
- It is helpful to improve the lubrication and friction, and improve the lubrication performance of oil-based drilling fluid.
- Micro-nano particles can block the micro fractures of nanometer scale in shale, and then prevent the transmission of pressure and improve the borehole stability;
- Good high temperature stability, temperature resistance up to 260 ºC;
It is a liquid packaged in 50L, 200 L, 1000L drums. International packaging may vary. And they shall be stored in a shady and dry place with good ventilation.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.
| I . Filtration Reducer For WBM | |
| DSP-1 HTHP Polymer Filtration Reducer | |
| DSP-2 Polymer Filtration Reducer | |
| PAN-Trol Low Viscosity Copolymer Filtration Reducer | |
| PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
| SMP Sulfomethylated Phenolic Resin | |
| SMP-III Sulfomethylated Phenolic Resin | |
| SPNH Lignite Resin for Drilling Fluid | |
| LYS Modified Starch | |
| SHR-1 Modified Starch HT | |
| DACP Alkyl cellulose polysaccharide for drilling fluid | |
| II. Shale Inhibitor For WBM | |
| NP-1 Nano-polyester for Drilling Fluid | |
| NS-1 Nano-SiO2 | |
| FF-I Sulfonated Asphalt(High purity) | |
| FF-V Sulfonated Asphalt(Ecnomical) | |
| FF-III Emulsified Asphalt | |
| AP-1 Polyamine Shale Inhibitor | |
| POLYOL | |
| DLA-1 Aluminum Based Shale Inhibitor | |
| III. Lubricant For WBM | |
| HEP-1 EP Lubricant for High Density Mud | |
| EP-202 EP Lubricant for Drilling Fluid | |
| EP-204 Oil Base Lubricant for Drilling Fluid | |
| GR Solid Lubricant (Graphite base) | |
| IV. Thinner For WBM | |
| SF Silicon-fluorine Thinner | |
| DLST CF Chromium Free Lignosulfonate Thinner | |
| V. Lost Circulation Materials | |
| SDF3 Compounded LCM | |
| GWS-1 Delayed Expansion LCM | |
| HFD-1 Rapid Filtrating High Strength LCM | |
| VI. OBM Additives | |
| OME-1 Primary Emulsifier for OBM | |
| OME-2 Secondary Emulsifier for OBM | |
| OFC OBM Filtration Reducer | |
| OMP-1 Nano-Polymer Sealing Additive for OBM | |
| OMP-2 Expanded Graphite Plugging Agent for OBM | |
| VII.Defoamer For WBM | |
| Polyether Defoamer | |
| PD-100 Organosilicon Deformer | |
| VIII. Bactericide For WBM | |
| JM-1 Bactericide for Drilling Fluid | |
| IX. Filtration Reducer For Cementing | |
| DSPC-1 Filtration Reducer For Cementing | |
| DSPC-2 Filtration Reducer For Cementing | |
| X. Other Series | |
| SR301 Pipe Freeing Agent | |
| ZH-2 Corrosion Inhibitor for Drilling Fluid | |
