Audited Supplier
FF-I is a high purity sulfonated asphalt with a wide range of applications and numerous advantages. It is produced as a water-soluble petroleum sulfonate through a unique solvent media process, containing high water soluble content and some oil soluble content. Compared to regular modified asphalt, FF-I has a higher absorbing group content, allowing for absorption on the shale interface through electrical absorption. This results in reasonable anti-sloughing and filtration control properties with minimal temperature influence, making it suitable for various water-based drilling fluids. The recommended dosage is 3.5 - 10.5 ppb.
| Items | Specifications |
| Appearance | Black or brown free-flowing powder |
| Moisture, % | ≤10.0 |
| pH | 8.0-11.0 |
| Sodium sulfonate group, % | ≥10.0 |
| Oil soluble content, % | ≥25.0 |
| Water soluble content, % | ≥70.0 |
| Acid precipitates content, % | ≤15.0 |
| FLHTHP, % | ≤32.0 |
- High purity, high content of sulfonated asphalt, can ensure the sealing performance of the product in drilling fluid.
- Perform sealing agents in OBM.
- Reduce torque and drag, avoid pipe stuck.
- Good sealing capacity, improve the mud cake quality and control the filtration loss under high temperature (up to 220 ºC) and high pressure condition.
- No harm to oil and gas reservoir.
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.
| I . Filtration Reducer For WBM | |
| DSP-1 HTHP Polymer Filtration Reducer | |
| DSP-2 Polymer Filtration Reducer | |
| PAN-Trol Low Viscosity Copolymer Filtration Reducer | |
| PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
| SMP Sulfomethylated Phenolic Resin | |
| SMP-III Sulfomethylated Phenolic Resin | |
| SPNH Lignite Resin for Drilling Fluid | |
| LYS Modified Starch | |
| SHR-1 Modified Starch HT | |
| DACP Alkyl cellulose polysaccharide for drilling fluid | |
| II. Shale Inhibitor For WBM | |
| NP-1 Nano-polyester for Drilling Fluid | |
| NS-1 Nano-SiO2 | |
| FF-I Sulfonated Asphalt(High purity) | |
| FF-V Sulfonated Asphalt(Ecnomical) | |
| FF-III Emulsified Asphalt | |
| AP-1 Polyamine Shale Inhibitor | |
| POLYOL | |
| DLA-1 Aluminum Based Shale Inhibitor | |
| III. Lubricant For WBM | |
| HEP-1 EP Lubricant for High Density Mud | |
| EP-202 EP Lubricant for Drilling Fluid | |
| EP-204 Oil Base Lubricant for Drilling Fluid | |
| GR Solid Lubricant (Graphite base) | |
| IV. Thinner For WBM | |
| SF Silicon-fluorine Thinner | |
| DLST CF Chromium Free Lignosulfonate Thinner | |
| V. Lost Circulation Materials | |
| SDF3 Compounded LCM | |
| GWS-1 Delayed Expansion LCM | |
| HFD-1 Rapid Filtrating High Strength LCM | |
| VI. OBM Additives | |
| OME-1 Primary Emulsifier for OBM | |
| OME-2 Secondary Emulsifier for OBM | |
| OFC OBM Filtration Reducer | |
| OMP-1 Nano-Polymer Sealing Additive for OBM | |
| OMP-2 Expanded Graphite Plugging Agent for OBM | |
| VII.Defoamer For WBM | |
| Polyether Defoamer | |
| PD-100 Organosilicon Deformer | |
| VIII. Bactericide For WBM | |
| JM-1 Bactericide for Drilling Fluid | |
| IX. Filtration Reducer For Cementing | |
| DSPC-1 Filtration Reducer For Cementing | |
| DSPC-2 Filtration Reducer For Cementing | |
| X. Other Series | |
| SR301 Pipe Freeing Agent | |
| ZH-2 Corrosion Inhibitor for Drilling Fluid | |
Shandong Deshunyuan Petro Sci & Tech Co. Ltd (hereinafter referred to as "DSY") is located in Shengli Oilfield (The second largest oilfield in China) of Dongying city. The company was founded in 1999 with 24.5 million USD registered capital. It is a high-tech enterprise which is dedicated to the new petroleum technology development and application. The company has more than 100 acres of drilling fluid workshops and more than 30, 000 MT annual production capacity of drilling fluid additives.
The main business covers drilling fluid additives production, drilling fluid engineering service, harmless disposal technology service of drilling waste, R&D of chemicals for Oilfield. DSY provides drilling fluid products and technical proposal for the customers to help them maximize the productivity and cost-efficiency of their drilling operations.
As one of the first-class suppliers , CNPC and COSL, the good product quality and the advanced technology promote our products to be widely applied in many domestic and international oilfields and receive a lot of praises from our customers. The products applied in domestic oilfields such as Shengli Oilfield, Tuha Oilfield, Daqing Oilfield and international oilfields in Turkmenistan, Iraq, Kazakhstan, Sudan, Venezuela and so on.
DSY has established "Oilfield Chemical Engineering Center" (hereinafter referred to as "Center") with China University of Petroleum. The Center covers drilling fluids lab, chemical synthesis lab, chemical analysis lab, reservoir protection lab, which are equipped with more than 100 sets of perfect advanced testing instruments.
DSY has more than 120 employees, includes 48 employees with BA degrees, 8 employees with senior title, 15 scientific researchers, 35 technical personnel.
DSY has set up advanced and improved inner control system and quality control system, it has passed API, ISO9001, ISO14001, ISO18001, HSE of CNPC,
DSY is your best partner to provide professional drilling fluid products and engineering services in oilfield drilling industry.
