Audited Supplier
FF- I is a type of high purity sulfonated asphalt which can be applied in a wide range and has a lot of advantages. FF- I is a petroleum sulfonate made water soluble by a unique solvent media process. It contains high water soluble content and a certain amount of oil soluble content. Compared with normal modified asphalt, FF- I contains more absorbing group, so it absorbing on the shale interface through electrical absorption, and shows reasonable anti-sloughing and filtration control property with lower temperature influence. Therefore, it can be applied in various water-base drilling fluids. The recommend dosage is 3.5 - 10.5 ppb.
| Items | Specifications |
| Appearance | Black or brown free-flowing powder |
| Moisture, % | ≤10.0 |
| pH | 8.0-11.0 |
| Sodium sulfonate group, % | ≥10.0 |
| Oil soluble content, % | ≥25.0 |
| Water soluble content, % | ≥70.0 |
| Acid precipitates content, % | ≤15.0 |
| FLHTHP, % | ≤32.0 |
- High purity, high content of sulfonated asphalt, can ensure the sealing performance of the product in drilling fluid.
- Reduce torque and drag, avoid pipe stuck.
- Perform sealing agents in OBM.
- No harm to oil and gas reservoir.
- Good sealing capacity, improve the mud cake quality and control the filtration loss under high temperature (up to 220 ºC) and high pressure condition.
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.
| I . Filtration Reducer For WBM | |
| DSP-1 HTHP Polymer Filtration Reducer | |
| DSP-2 Polymer Filtration Reducer | |
| PAN-Trol Low Viscosity Copolymer Filtration Reducer | |
| PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
| SMP Sulfomethylated Phenolic Resin | |
| SMP-III Sulfomethylated Phenolic Resin | |
| SPNH Lignite Resin for Drilling Fluid | |
| LYS Modified Starch | |
| SHR-1 Modified Starch HT | |
| DACP Alkyl cellulose polysaccharide for drilling fluid | |
| II. Shale Inhibitor For WBM | |
| NP-1 Nano-polyester for Drilling Fluid | |
| NS-1 Nano-SiO2 | |
| FF-I Sulfonated Asphalt(High purity) | |
| FF-V Sulfonated Asphalt(Ecnomical) | |
| FF-III Emulsified Asphalt | |
| AP-1 Polyamine Shale Inhibitor | |
| POLYOL | |
| DLA-1 Aluminum Based Shale Inhibitor | |
| III. Lubricant For WBM | |
| HEP-1 EP Lubricant for High Density Mud | |
| EP-202 EP Lubricant for Drilling Fluid | |
| EP-204 Oil Base Lubricant for Drilling Fluid | |
| GR Solid Lubricant (Graphite base) | |
| IV. Thinner For WBM | |
| SF Silicon-fluorine Thinner | |
| DLST CF Chromium Free Lignosulfonate Thinner | |
| V. Lost Circulation Materials | |
| SDF3 Compounded LCM | |
| GWS-1 Delayed Expansion LCM | |
| HFD-1 Rapid Filtrating High Strength LCM | |
| VI. OBM Additives | |
| OME-1 Primary Emulsifier for OBM | |
| OME-2 Secondary Emulsifier for OBM | |
| OFC OBM Filtration Reducer | |
| OMP-1 Nano-Polymer Sealing Additive for OBM | |
| OMP-2 Expanded Graphite Plugging Agent for OBM | |
| VII.Defoamer For WBM | |
| Polyether Defoamer | |
| PD-100 Organosilicon Deformer | |
| VIII. Bactericide For WBM | |
| JM-1 Bactericide for Drilling Fluid | |
| IX. Filtration Reducer For Cementing | |
| DSPC-1 Filtration Reducer For Cementing | |
| DSPC-2 Filtration Reducer For Cementing | |
| X. Other Series | |
| SR301 Pipe Freeing Agent | |
| ZH-2 Corrosion Inhibitor for Drilling Fluid | |
