Audited Supplier
Lathe Description :
* This series lathe machine is suitable for internal and external turning , tapering , and other rotating faces, metric , module and inch threads , as well as drilling and pull oil slot .
* Width of bed is wider than normal lathe machine , with high hardness on guideway , the guideway is through high-frequency quenching , wear-resisting .
* This machine is easy to operate , with rapid device for carriage , design with single hand wheel to operate .
* The strength and rigidity of machine is higher than normal lathe machine , high efficiency , suit for heavy duty machining .
| Type | CA6140(B) | CA6150(B/C) | CA6161(B/C) | CA6166(B/C) | CA6180(B/C) |
| CA6240(B) | CA6250(B/C) | CA6261(B/C) | CA6266(B/C) | CA6280(B/C) | |
| Max. swing over bed | 400mm | 500mm | 610mm | 660mm | 800mm |
| Max. swing over carriage | 210mm | 300mm | 370mm | 400mm | 540mm |
| Max. swing in gap | 630mm | 720mm | 830mm | 880mm | 1020mm |
| Max. effective length in gap | 210mm | ||||
| Max. length of workpiece | 750/1000/1500/2000/2200/3000/4000mm | ||||
| Width of bed | 400mm | ||||
| Section of turning tool | 25×25 mm | ||||
| Main spindle motor | 7.5kw(10HP) | ||||
| Spindle | |||||
| Spindle speed | 16--1400rpm(24step) | ||||
| Spindle bore | 52mm (B:80mm),(C:105mm) | ||||
| Spindle taper | No.6(MT6)(Φ90 1:20)[Φ113:20] | ||||
| Feed | |||||
| NO. of feed | (64 kinds)(for each) | ||||
| Range of metric threads | (1-192mm) (44 kinds) | ||||
| Range of inch threads | (1-24tpi) (21kinds) | ||||
| Range of module threads | 0.25-48 (module 39 kinds) | ||||
| Range of diametral pitch threads | 1-96DP (37 kinds) | ||||
| Tailstock | |||||
| Max. tailstock spindle travel | 150mm | ||||
| Tailstock spindle diameter | 75mm | ||||
| Taper of tailstock spindle centre hole | 1-96DP (37 kinds) | ||||
| Packing dimensions (L*W*H) | |||||
| Overall dimensions for 750mm | 2440×1140×1750mm | ||||
| Overall dimensions for 1000mm | 2700×1140×1750mm | ||||
| Overall dimensions for 1500mm | 3200×1140×1750mm | ||||
| Overall dimensions for 2000mm | 3700×1140×1750mm | ||||
| Overall dimensions for 2200mm | 4030×1140×1750mm | ||||
| Overall dimensions for 3000mm | 4800×1140×1750mm | ||||
| Overall dimensions for 4000mm | 5680×1140×1750mm | ||||
| Weight (kg) | |||||
| Overall dimensions for 750mm | 2100 | 2170 | 2300 | 2400 | 2520 |
| Overall dimensions for 1000mm | 2200 | 2260 | 2380 | 2580 | 2720 |
| Overall dimensions for 1500mm | 2380 | 2450 | 2577 | 2830 | 3000 |
| Overall dimensions for 2000mm | 2750 | 2800 | 3000 | 3050 | 3300 |
| Overall dimensions for 2200mm | 2800 | 3000 | 3150 | 3400 | 3500 |
| Overall dimensions for 3000mm | 3300 | 3500 | 3600 | 4000 | 4220 |
| Overall dimensions for 4000mm | 3500 | 3800 | 3950 | 4600 | 4900 |
Standard accessories
Living Center 3-jaw chuck
Dead Center Toolpost protection
Steady rest Chuck protection
Follow rest Leading screw guard
Foot plate Cooling system
Face plate Lubrication system
Back guard Work lamp
Tool box
Optional Accessories:
Taper attachment 4 jaw chuck
Digital Readout Quick Change Toolpost
As shown in below
paching shiping
For machine: usually by sea;For documents: by international express, eg. DHL,TNT or EMS.
For packing :Free fumigation plywood packaging steel base
our service
1. Technical support online service provided.
2. Technical files service provided.
3. Machine operation video provided
4. On-site training service provided.
5.Spare parts replacement and repair service provided.
6 All of the questions will be replied within 8 hours
7. If you need to develop products with your own specification, we can help you to work it out.
8. Always be honest, never lie to customer, and never declare anything we don't have
Since 1996,20 years' history for machine tool manufacturing
10 years' history for exportTotal 2 manufacturing bases in china
Sino-germany technology cooperation
Production of 8 categories, more than 130 kinds of products
Set up design&research center at TAIWAN
Exported to total 48 countries in the world covered most areas
One-stop shopping for nearly all other types' machine tools1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model You can also send us the products drawing ,we will choose the most suitable machines for you .
1: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
2: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.
3. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
4: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
5: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.What's your Industrial Voltage?
2.We strongly suggest you to tell us size, material of your workpiece for our evaluation, if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
3.If need CIF Price, please kindly tell us the port of destination.
