Audited Supplier
Knapsack pump inverter YX9600 series
Constant water pressure supply system for well
YX9600 is an integrated controller that is easy to set up and use. It allows you to set your desired water pressure while also being energy efficient. By reducing the pressure on your system when it's not needed, reduces the energy consumed, saving you money.
YX9600 can monitor the system water demand. The inverter speeds up or slows down the pump depending on the water requirements to deliver constant water pressure where and when it's needed.
| Items | Specifications |
| Rated Input Voltage | 220V / 380V / 415V / 440V; 50Hz/60Hz |
| Tolerance | Voltage: ±20% voltage unbalance rate:<3%; frequency: ±5% |
| Rated Output voltage | 220V /380V / 415V / 440V |
| Frequency range | 0Hz~5000Hz |
| Frequency resolution | 0.01Hz |
| Overload capability | 150% rated current for 1 minute, 180% rated current for 3 seconds |
| Torque control accuracy | ±5%(FVC) |
| Control mode | V/F, sensorless vector control (SVC), Speed Sensor vector control(FVC) |
| Frequency Accuracy | Digital setting: The highest frequency×± 0.01% Analog setting: The highest frequency ×±0.2% |
| Frequency resolution | Digital setting: 0.01Hz; Analog setting: The highest frequency× 0.1% |
| Start frequency | 0.40Hz~20.00Hz |
| Torque boost | Auto torque boost, manual torque boost 0.1%~30.0% |
| V/F curve | Five ways: constant torque V/F curve, 1 kind of user defined V/F curve ,3 kinds of down torque curve(2.0/1.7/1.2times the power) |
| Acc./Dec. curve | Two ways: linear Acc./Dec.,S-curveAcc./Dec.;7 kinds of Acc./Dec. time, Time unit(minute/second) optional, max. time: 6000 minutes. |
| DC braking | DC Braking Frequency: 000Hz~ Max Frequency Braking Time: 0.0s~36.0s Braking Action Current Value: 0.0%~100.0% |
| Energy consuming braking | Below 22KW drive built-in energy consuming braking unit, external braking resistor is optional. |
| Jog running | Jog frequency range:0.1Hz~50.00Hz, JOG Acc./Dec. time: 0.0~6500.0s |
| Build-in Double PID | Easily constitute a close loop control system |
| Short time continuous working when power failure | when the instantaneous power failure occurs, the load side regenerative energy compensate the voltage drop and the inverter keep running for a short time. |
| Multi-stage speed running | Max 16 multi-stage speed running via build-in PLC or control terminals |
| Textile swing frequency | Swing frequency available with preset and central frequency adjustable |
| Auto voltage regulation | Keep a stable voltage automatically when the grid voltage transients |
| Auto energy saving running | Saving energy by auto optimizing V/F curve according to the load |
| Auto current limiting | Auto current limiting to prevent frequent over current fault trip |
| Multi pumps control | With water supply kit, it can implement multi pumps constant pressure water supply |
| Communication | Support: Modbus |
| Running command channel | Keypad , Control terminal , Serial port , Above 3 channels are switchable |
| Frequency setting channel | Keypad potentiometer setting: ,control panel keys setting; Function code setting: Serial port setting; Terminal up/down setting: Input Analog voltage setting: Input Analog current setting: Input pulse setting; Combination ways setting;Above ways are switchable. |
| Switch input channel | FWD/REV command: 8channels programmable switch inputs, 52kinds of function can be set separately |
| Analog input channel | 4~20mA: 0-10V: 2 optional analog inputs |
| Analog output channel | 4~20mA or 0~10V optional, setting frequency and output frequency ,etc feature output |
| Switch/pulse output channel | Programmable open collector output: relay output :0~20KHz pulse output: |
| LEDdigital display | Display setting frequency, output voltage, output current, etc. |
| External meter display | Display output frequency, output current, output voltage, etc. |
| Key lock | All the keys can be locked |
| Parameter copy | Function code parameters can be copied between inverters when use remote control panel. |
| Protection function | Overcurrentprotection:overvoltageprotection:undervoltageprotection:overheating protection: overload protection, etc. Input phase loss protection ( model>2.2kw) |
| Optional parts | Braking unit: remote control panel: cable: panel mounting feet, etc. |
| Environment | Indoors, avoid from direct sunlight, dust, corrosive gas, oil mist, steam, water dropper salt, etc |
| Altitude | Lower than 1000m (derating is necessary above 1000m) |
| Ambient temperature | -10ºC~+40ºC |
| Humidity | <95%RH, no condensation |
| Vibration | Lower than 5.9m/s (0.6g) |
| Storage temperature | -20ºC~+60ºC |
| Protection level | IP20(In the selection of state display unit or the keyboard state) |
| Cooling | Forced air cooling |
| Installation | Wall mounted; Floor mounted |
2. Constant water pressure: Constant output water pressure regardless of the water consumption , extend the service life of the pipe network with smooth and quiet water flow;
3. Green environmental protection: using water directly, and reduce the second pollution of water supply;
4.Easy installation: with our kit, it can attach to various pump motors
5.Simple operation: Plug&Play operation, all you need is connecting wires and press RUN button; We can tailor our control software as per your transducer/sensor data, so you no need to do any setting when receive the inverter.
6.Motor soft start: improving power factor and extend the service life of the water pump.
7.Wider voltage range: the pump can work stably when the voltage range is 160V-250V and no matter power supply is 50Hz or 60Hz, it still can work;
8.Highly integrated design: combining the inverter system, control system, protection system, cooling system and pressure transducer(optional);
1. Can I get some samples?
Yes, Sample order is available for quality check and market test. But you have to pay for it.
2. What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order.
3. What's your payment terms?
We usually accept all kinds of payment terms. Such as T/T, L/C, Western Union. Cash.
4. What's your warranty terms?
We offer 18 months warranty time.
5. Do you have the products in stock?
Depends on your request, We have standard models in stock. Some special products and big order will be newly produced according to your order.
6. Can I mix different power in one container.
Yes, Different models can be mixed up in one container, even one order.
7. How does your factory do the quality control?
Quality is priority, we always attach the importance to quality control from the beginning to the end of the production. Every product will be fully assembled and carefully tested before packing and shipping.
8. Can you sell spare parts?
If you are using our products. We can sell spare parts to you. But we couldn't sell the half-finished products.
9. I would like to know if you have a partner for export?
Yes. We have the right to export and can sell electrical product all over the world...
10. Can you make the inverter and soft starter control boards (switchgear)?
Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request, and our factory can do soft starter by ourselves.
11. Can the inverter connect with computer?
Yes. All inverters have built-in RS485 port. And support Modbus communication protocol.
12. How can I trust you?
Our company has been audited and approved ISO9001, CE. CCC. Assessment report will could be sent to you by e-mail. And we will take all the responsibility once problem during warranty time.
