Audited Supplier
Refrigerated trucks are commonly used for transporting frozen foods (such as ice cream, frozen dumplings, frozen meat products), and sometimes customers also refer to them as refrigerated trucks.
Some large supermarkets also require refrigerated trucks to transport beverages until they reach a certain temperature before unloading (dairy transport trucks)
Vegetable and fruit (fresh goods transport vehicle) transportation of fresh products
Vaccine drugs (vaccine transport vehicles)
| Configuration parameters of the refrigerated truck | |
| Model | I-suzu 7.9m |
| Products Name | Refrigerated Truck |
| Other Name | Reefer Truck |
| Overall vehicle dimensions (mm) | 10000*2600*3980 |
| Dimensions of the cargo box (mm) | 7900*2440*2500 |
| wheelbas(mm) | 5550 |
| Engine | Euro 6,I-suzu , 205hp |
| Gearbox | I-suzu ,mld ,6-speed transmission |
| Tires | 295/80R22.5 18PR |
| Steering type | left hand / right hand drive |
| Load Capacity | 10 ton |
| Brand and model of the chiller | Thermo King 1100 |
| Low Temperature | -18ºC |
| Process Parameters of the Box Body | |
| Structure of the Compartment Panel | It adopts a fully sealed compartment panel structure. The compartment panel has a 6-layer Meiji structure. The inner and outer layers are complete aluminum plates with a thickness of 3.0 mm. The internal framework uses reinforced ribs that have undergone broken bridge heat insulation treatment, and the internal panel core is made of high-density polyurethane foaming material |
| Combined Compartment Process | In the combined compartment process of the new technology, there is no welding process. The entire compartment panels are bonded with resin glue and fixed together with reinforcing screws for compartment combination. The vertical corner protectors of adjacent compartment panels are overlapped and buckled. The upper and lower extension sections of the left, right and front side panels just cover the bottom plate and the top plate, and the splicing of the compartment panels is extremely tight without any gaps. |
| Bottom Plate Process | A high - strength bamboo plywood is placed on the floor plane of the load - bearing structure, which can support the forklift to drive inside the cargo compartment. If forklift loading is required, you can choose to install a sunken full - welded ventilation trough. The side panels are standard - equipped with 30 - cm new - style protective plates, and two drainage outlets are added at the rear |
| Box body thickness | Side panels: 8 cm , Floor: 11 cm (high-density skeleton), Roof panel: 10 cm |
| Painting | Front single-opening door Rear double opening door, stainless steel door frame and locking components, rear door double locking rod, fully welded sunken ventilation groove, integrated profile 30cm high skirt edge, processing tool box, with ladder added, 5 ventilation grooves added to the front panel of the box, and the rest are standard. |
| We have various styles for you to choose | |
 |  |  |
| 1. The procurement of raw materials strictly controls the quality, with high-strength and environmentally friendly fiberglass reinforced plastic and a compression coefficient of over 400p. After the vehicle flips over, there is no deformation in the carriage, and the goods can be removed normally. | 2. Reinforced bottom plate, (Blue brand refrigerated truck bottom plate is laid with a whole piece of bamboo plywood without joints or seams) with a special and unique bottom plate structure, which ensures both the bearing capacity of the bottom plate and the insulation performance of the box. | 3. The solid wood frame has good insulation performance, and the cabin has toughness and strong impact resistance. |
 |  |  |
| 4. The vehicle's bottom plate is equipped with fiberglass anti slip plates, which are corrosion-resistant. The junction of the box bottom plate is treated with anti leakage measures, and the interior is collision resistant to prevent damage to the cargo compartment caused by forklift loading and unloading. | 5. The carriage floor and auxiliary beam are connected by pressure plates, which have good stability and flexibility. | 6. All metal sheets are automatically fully welded and seamlessly welded, fully ensuring that the metal inner panels of refrigerated trucks for special purposes such as aquatic products do not leak. |
 |  |  |
| 7. After a real accident inspection, the box overturned on the highway when fully loaded. After being straightened, the box is basically intact, made of real materials, and sturdy and durable. | 8. The joints of various parts of the cabin are sealed with sealing glue, which has good sealing performance, no water leakage, and high insulation. | 9. The four corners of the rear door frame are reinforced, sturdy and durable; Door frame cold bridge partition treatment for better insulation performance. |
Q1. Is your company a factory or a trading company?
A: We are a leading manufacturer of special trucks, tank trucks, trailers, and spare parts in China. Welcome to visit our special vehicle production base in Suizhou City, China.
Q2. What are your payment terms?
A: T/T 30-50% as deposit, the rest to be paid before delivery. We will show you photos of the products and packages before you pay the balance.
Q3. What are your delivery terms?
A: EXW, FOB, CFR, CIF, DAF, DDU.
Q4. How about your delivery time?
A: Generally, it takes 20 to 30 days after receiving the advance payment. The specific delivery time depends on the items and quantity of the order.
Q5. Can you customize the products to meet my requirements?
A: Yes. We have a professional R&D team, and we can produce products exactly as you require.
Q6. What is the price of your products?
A: We are factory direct sales, so the price is very competitive. Different products have different prices. The price
also depends on your special needs. To know the exact price, please contact us!
Q7. Do you test all the goods before delivery?
A: Yes, we do 100% testing before delivery.
Q8. What service can I get from you?
A: We provide lifetime tracking service and a one-year free warranty for all our products.
