Audited Supplier
1T/D - 30T/D FRP Moulded Septic Tank Buried-Type Sewage Treatment Tank Five Compartments Moulded Casting Septic Treatment
The sewage treatment tank independently developed by NEW YUDA Environmental Technology Co., Ltd. is an upgraded product of an integrated domestic sewage treatment device, which has undergone multiple technological innovations and has been highly integration.
SMC Sewage treatment tank is a kind of sewage integrated treatment equipment which has the characteristics of high efficiency nitrogen and phosphorus removal is suitable for use in domestic wastewater treatment, it has low-cost, low energy consumption, easy maintenance, it has the advantages of light weight, corrosion resistance, long service life, small footprint, simple construction and installation, easy management, low operating costs. Has the following characteristics:
1. Low investment, good treatment effects, short construction period, easy maintenance;
2. Low power consumption, energy saving, low daily operation costs;
3. Using SMC material mold casting, with stable and reliable quality;
4. Use of Internet of Things (IoT) technology to realize remote mobile management and save labor costs;
5. Low sludge production;
6. Long service life, the service life can reach more than 30 years.
1. SMC Materials
SMC material adopts FRP mold casting process, which has the advantages of general FRP material performance and at the same time improves the relevant mechanical property index. The material of the tank body include UP resin, glass fibers, fillers and various additives such as initiators, polymerization inhibitors, thickeners, internal release agents, etc. The glass fibers bear the major part of the mechanical strength, the filler reduces the cost and improves all the relevant properties of the resin and the composite material, etc., and prevents the fibers and resin from separating or being leached out during molding process.
Performance indicators of tank body material
| Name | Unit | Index | Remarks |
| Density | g/cm3 | 1.75~1.95 | |
| Water-absorbing quality | mg | <3 | |
| Heat distortion temperature | ºC | ≥240 | |
| Impact strength of supported beam (without notch) | KJ/m2 | 70~90 | |
| Bending strength | MPa | 150~180 | |
| Flame retardancy | Level | HB | |
| Compressive strength | MPa | >140 | |
| Curing temperature | Cº | 135~145 | |
| PENETRATION INDEX | mm | 3~5 | |
| Glass fiber content | % | 25±2 | |
| Material shrinkage rate | % | 0.05~0.10 | |
| Tensile strength | MPa | 80~90 | |
| Degree of surface finish | To ensure that the material is free of impurities and has a glossy, smooth, crack-free surface. | ||
- Corrosion resistance
- Lightweight, high-strength, and resilient
- UV aging resistance, high and low temperature resistance
- Heat Insulation
- Good Impact Resistance, easy to manufacture
Good impact resistance; insensitive to notching (no neat fracture, cracks do not spread); good machinability (can be drilled and cut).
3. Sewage Ttreatment Tank Details Specification
Purification Tank | Details Sepcification |
Capacity | 1T/D |
Size | 2400×1300×1400mm |
Weight | 180kg |
Thickness | 6-7mm |
Raw material | SMC molded FRP Equipment |
Included system | Including equipment body, packing, aeration system, reflow system, etc. |
4. Bio-fillers
As one of the core components of the sewage treatment tank, the performance of the filler directly affects the attachment of microorganisms, thereby affecting the effectiveness of biofilm treatment of wastewater. Porous gel carrier has good hydrophilicity. The load capacity of microorganisms is large, and the volumetric load is high. The surviving microorganisms are not easily lost under the shear action of water and gas, thus achieving the goal of simultaneous reduction of ammonia nitrogen and total nitrogen in wastewater. It also has the advantages of strong bubble cutting ability, high space volume utilization rate, and no dead zone, making it an ideal product for microbial carriers in current biological treatment technologies.
Technical Parameter
| Item | Unit | Parameters |
| Material type | polymer composites | |
| Specification | mm | 10±1,20±1(After water absorption and expansion) Cube |
| Specific surface area | m2/m3 | ≥4000 |
| Porosity | % | 98 |
| Allocation rate | % | 15~40 |
| Membrane hanging time | d | 3~7 |
| Nitrification efficiency | gNH3-N/m3 Carrier·d (to oxygen conversion limit) | 600~1250 |
| BOD5 oxidation efficiency | gBOD5/m3 Carrier·d (to oxygen conversion limit) | 1000~5000 |
| COD oxidation efficiency | gCOD/m3 Carrier·d (to oxygen conversion limit) | 1000~7500 |
| Applicable pH | 6~10 | |
| Applicable temperature | ºC | 1~50 |
| Service life | Above 15 years |
5.Project Cases
A) How could I get a sample?
Sample are available, but please afford sample costs and express fee.
B) Sample lead time?
Existing items: Within 7-10 days.
C) Do you offer OEM service and marked our logo on the products?
Yes, We offer OEM services.
D) What is the delivery time?
Normally, delivery time is 20-30days after order.
E) How to guarantee the quality of your products?
1) We have strict quality control system, every product has been strictly inspect and stamped QC psssed before shipping out.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.
