Audited Supplier
OEM and ODM accept
Slewing angle:0-400°
Telescopic knuckle boom cranes, because of its lifting arm can be telescopic, expanding the working radius, but also can be folded, saving the deck space and widely praised.
Applications:
Telescopic knuckle boom cranes are widely used in ships, factories, workshops and other places with a wide range of working radius and insufficient space.
| 30KN×17m Hydraulic foiding boom telescopic slewing crane | ||||
| Safe working load | 30kN | Environmental temperature | -10ºC-45ºC | |
| lifting height | 20m | Motor specification | Y160L-4-H | |
| lifting speed | 10M/min | Motor power | 20KW | |
| Rotation speed | 0..6r/min | Motor duty system | S6-40% | |
| Rotation angle | 359°(Incomplete rotation) | Motor power source | 380V /5HZ/3P | |
| Wooking radius | 2.5~17m | Protection class | IP56 | |
| luffing time | 60s | Insulation class | F | |
| Allowable tilt angle | Heel | ≤5° | ||
| Trim | ≤2° | |||
| Protection level of electric control box | IP23 | |||
| Electic control box controls voltage | 220V/50HZ/1P | |||
Note: The parameters of this table are conventional configurations, and can be redesigned according to the actual working conditions of users.
| Model | Load Capacity (T*m) | Max.Boom Length (m) | Pedestal Height (mm) | Pedestal Dia. (mm) | Lifting Min. Retracted | Lifting Max. Fully Extend | Est. Power (kw) |
| EJTC-2T12m | 2T x 12 m | 12 | 1500 | 850 | 2 T x 8 m | 2T x 12 m | 22.0 |
| EJTC-5T15m | 5T x 15 m | 15 | 1500 | 1420 | 5 T x 10 m | 5T x 15 m | 30.0 |
| EJTC-5T25m | 5T x 25 m | 25 | 1500 | 1620 | 5 T x 12 m | 5T x 25 m | 37.0 |
| EJTC-10T20m | 10T x 20 m | 20 | 1800 | 1820 | 10T x 8 m | 5T x 20 m | 75.0 |
| EJTC-10T30m | 10T x 30 m | 30 | 2300 | 2250 | 10T x 16 m | 5T x 30 m | 10.0 |
| EJTC-15T25m | 15T x 25 m | 25 | 2000 | 2250 | 15T x 12 m | 5T x 25 m | 25.0 |
| EJTC-15T35m | 15T x 35 m | 35 | 2300 | 2500 | 15T x 20 m | 5T x 35 m | 60.0 |
| EJTC-20T20m | 20T x 20 m | 20 | 2000 | 2500 | 20T x 8 m | 10T x 20 m | 25.0 |
| EJTC-20T30m | 20T x 30 m | 30 | 2300 | 3000 | 20T x 16m | 10T x 30 m | 90.0 |
| EJTC-25T30m | 25T x 30 m | 30 | 2500 | 3000 | 25T x 16 m | 10T x 30 m | 200.0 |
Note: This table data is for reference only, the detailed data can be adjusted according to the customer's needs, can be customized.
SWL:0.1Ton-5Ton
Our company provides the service of refitting the container spreader crane into grab-type ship loader for bulk material loading and unloading. Also corollary equipment----dust trap hopper system building.
Originally, the container spreader crane can only hang the container spreaders, after our professional refitting ,it becomes into a grab-type ship loader. After refitted, the crane can be used with two type of grabs - wireless remote control gab and electric hydraulic grab .So it can load and unload many kinds of bulk materials, such as grain, coal,sand, fertilizer and so on. Thereby, the refitted equipment increases the operation rate of the container spreader crane.
Focus on lifting equipment production, various specifications, can be customized.
Q1: What's the information should I provide when inquiry?
A: Thanks for your question. The more information you provide, the more accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.
Q2: Is your products customized?
A: Yes, because of the different working condition, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick quote!
Q3: How can we install the crane?
A: Our senior engineer can be your side to provide the installation guide service and training.
Q4: Can you provide the serious lifting tools?
A: Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
Q5: How about your payment terms?
A: we accept T/T and L/C at sight.
