Audited Supplier
2-Component Polyurethane Corner Adhesive for Pre-Assembled Aluminum Profiles
| Our products |
SP211 is a solvent-free, environmentally friendly, curing, two-component polyurethane structural adhesive with excellent adhesion and aging resistance.
We have a lot of different models with different levels. different quality, different usage.
SP21X ( SP211, SP212, SP213, SP214)
SP211- Two-part PU structural adhesive, 15 mins of curing time, suitable for most areas
SP212- Two-part PU structural adhesive, 25 mins of curing time, suitable for most areas
SP213- Two-part PU structural adhesive, 30 mins of curing time, suitable for hot areas
SP214- Two-part PU structural adhesive, 5-10 mins of curing time, suitable for cold areas
SP118- One-part PU structural adhesive for general purpose
| Special features |
- Wide adhesion spectrum to different building materials
- High bonding strength
- Controlled hardening up
- Large gap bridging
- Easy handling thanks to application by means of the twin cartridge with static mixing tube
- Long processing time
- Thixotropic, does not drop
- Good weather resistance
- Solvent-free
- Suitable for the injection procedure in window manufacturing
- It can be painted after the hardening up
- Powder-coating possible
| Typical Applications |
- Bonding of aluminum corner angles into anodized or powder-coated cover- and wing frame profiles for the aluminum window-, door- and façade manufacturing
- Joint bonding of gypsum fiber boards
- Bonding of different material surfaces, e.g. wood, laminate, glass fiber reinforced plates GRP/GFK (smoothened), and aluminum.
- GRP/GFK-sandwich superstructures in the vehicle construction
- Filling of assembly joints of up to 8 mm width
- Restoration of damaged joints
- For bonding of Alu, HPL, GRP, and other materials.
| Technical Data Sheet |
| Specification of Part-A (resin) | |||
| Items | Standard | Specification | Typical value |
| Color | Visual | White | White |
| Viscosity (mPa.s) (Brookfield, 7# 10rpm) | GB/T 2794 | 220000-250000 | 238000 |
| Density (g/cm3) | GB/T 13354 | 1.40 ± 0.1 | 1.43 |
| Specification of Part-B (hardener) | |||
| Items | Standard | Specification | Typical value |
| Color | Visual | Beige | Beige |
| Viscosity (mPa.s) (Brookfield, 7# 10rpm) | GB/T 2794 | 220000-300000 | 272000 |
| Density (g/cm3) | GB/T 13354 | 1.60 ± 0.1 | 1.63 |
| Specification after mixture | |||
| Items | Standard | Specification | Typical value |
| Mixing ratio | Volume ratio | A: B=1:1 | / |
| Color | Visual | White | White |
| Viscosity (mPa.s) (Brookfield, 7# 10rpm) | GB/T 2794 | 240000-260000 | 255000 |
| Density (g/cm3) | GB/T 13354 | 1.55 ± 0.1 | 1.53 |
| Pot life (min) | / | 30 ± 10 (adjustable) | 30 |
| Tack free time (hour) | GB/T 13477 | ≤ 3 | 35 min |
| Vertical Standing Sagging (mm) | GB/T 13477 | ≤ 3 | 0 |
| Specification after cured | ||||
| Items | Standard | Specification | Typical value | |
| Hardness (Shore D) | 1 hour | GB/T 531 | / | 2 |
| 2 hour | / | 16 | ||
| 3 hour | / | 32 | ||
| 4 hour | / | 50 | ||
| 5 hour | / | 54 | ||
| 24 hour | ≥ 60 | 72 | ||
| Shear strength MPa (Alu - Alu) | 24 hour | GB/T 7124 | ≥ 2 | 9.8 |
| 7 days | ≥ 3 | 11.3 | ||
| Bending deformation | GB/T 2567 | ≥ 4 | > 15 (Breakable) | |
| Service temperature (ºC) | / | -40 ~ +100 | / | |
| Note: The above typical values were all detected at 25 ºC; | ||||
| Application Process |
Cure Mechanism
Surface Preparation
After the cleaning process, a physical or chemical pretreatment might be required, depending on the surface and type of material. The type of pretreatment must be determined by tests.
For application out of the cartridge, the extrusion force must not exceed 3.3 kN. Extrude adhesive without a mixer to equalize the filling levels.
Attach the mixer and dispose of the first few cm of the bead prior to the application. Check the color of the adhesive and make sure it is mixed properly (no strings or stripes in the extruded bead). The mixer must be changed if the application is interrupted for longer than 7 minutes.
PACKING AND STORAGE |
| Package specification: Double tube plastic cylinder packaging (equipped with static mixing nozzle) 600ml/PCs, 12 PCS/ box | Storage: SEPNA SP21X has to be kept between 10 °C and 30 °C in a dry place. Do not expose it to direct sunlight or frost. After opening the packaging, the content has to be protected against humidity. The storage period is 9 months from the production period | Transportation: moisture-proof, rainproof, sunproof, high-temperature roof, keep away p from heat sources, handle with care, and do not squeeze or collide |
| Company Profile |
SEPNA focuses on the R&D and production of advanced new materials. Headquartered in Shanghai, the factory is located in Qidong High-tech Zone, Jiangsu Province. It is a modern technology factory with an area of 20000 square meters.
SEPNA factory uses an advanced MES automatic quality control system and a full-process ERP management system for strict quality control.
SEPNA factory and products have passed many international system certifications. Such as ISO9001-2015, SGS, 16949, and other certificates.
SEPNA adheres to the values of being "customer-centric, take technology as the blood, and focus on high-quality", adheres to the development concept of "DEVELOP DEPEND ON THE TECHNICAL INNOVATION, LIVE DEPEND ON THE QUALITY,"; Focus on providing customers with more accurate and safe products with "bonding, sealing and protection" functions.
SEPNA product lines, from flexible sealing, and fixed bonding to the development of multiple curing forms products, can fully match the production and manufacturing processes of different customers, and SEPNA can provide all customers with more options, higher efficiency, and better quality product solutions, as well as omnidirectional customized services and support.
SEPNA closely connects customers/suppliers/employees/partners with the mission of "Zero SL Bonds Us Together! ". And continues to promote technology and product innovation, service innovation, and talent innovation, better combine the value of products, services, and talents to make products more perfect, make industrial manufacturing more efficient, and provide more valuable products and service solutions for the high-end and high-end manufacturing industry!
| R&D TEAM |
| Why Choose Us |
1. Outstanding manufacturers and powerful factories.
3. Free Samples.
4. Imported Raw Materials and Test Equipment.
5. Strict quality control (We have passed GB/T 19001-2016, IS09001:2015, and IATF 16949:2016 quality system authentication, and we can provide ROHS/SGS/ MSDS certification of products).
6. Deliver in 7-15 Days after payment.
7. Excellent QC Team and R&D Team.
8. Provide professional application technology solutions.
9. Complete the after-sales service system.
10. Partners with Top 500 Global Companies.
Sepna's products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia the Middle East, Oceania, etc.
Until now, she has serviced nearly 1000 enterprises all over the world.Sepna's products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia the Middle East, Oceania, etc.
| Our customers and Exhibition |
| Certification |
| About Transportation |
Samples: Express ( FedEx, DHL, TNT, UPS, etc.)
Cargo: By Sea ( FCL / LCL), By Air, By Railway, By truck, etc.
| FAQ: |
Q1. How to get an accurate quotation from us?
A1. Please provide your requirements, product specifications, quantity, and trade terms.
Q2. Can you provide OEM service?
A2.Yes.Private labeling service is available
Q3. How to be SEPNA'S distributor?
A3.As the growing of Sepna's global business, we need to find more and more distributors and agents
worldwide. SEPNA will provide the best solution and service for our partners.
For more information, pls contact our salesperson or call us:+86-400-882-1323
Q4. Can I get a sample?
A4. Yes. We offer free samples
Q5. What is your product's shelf life?
A5.9 months when stored in cool dry and well-ventilated areas under 25ºC.
Click here to get the best price.
