Audited Supplier
Concrete mix truck 2.0cubic meters cement mixerHR self-loading concrete mixer is a device that integrates the functions of existing concrete transport trucks and mixing stations. It can automatically supply, meter, mix and unload concrete mixture.
1.4*4 vacuum high-pressure tires: pressure resistance is 5 times that of ordinary tires, high safety, extended service life,
2. Radiator: Two radiators dissipate heat for the mixing tank and engine. The internationally advanced plate independent cooling system is used to ensure oil filter quality and temperature control.
3. Hydraulic system: open oil inlet, plunger motor, two gear pumps participate in the work
4. Joystick: Two hydraulic pilot levers control the bucket, boom, 270° rotation, and tank lifting
5. Bucket: Hydraulic automatic gate
6. Water supply system: self-priming drive water pump, 24V self-timed centrifugal pump, car washing machine
7. Brake: Use a small servo pump on an independent dual circuit to activate, and use a single wheel with 4 pistons to enlarge the double brake calipers.
8.Q345 manganese steel frame: strong load-bearing capacity and high safety
9. Driving images: avoid blind spots on one side of the tank
10. Air conditioner
11. Electronic scale: Strictly control the weight and proportion of raw materials
12.Luxurious cab: Comfortable operation. In order to create a very good and comfortable operating experience when working, every detail has been carefully designed.
13. Cement hopper engine optional.
15. Front and rear bi-directional drive, the drum can rotate 270° at the same time
The self-loading concrete mixer is a device that combines the functions of an existing concrete truck and a mixing station. The self-mixing concrete truck can automatically load, measure, mix, and unload materials.
The vehicle is four-wheel drive, which enables the mixer to produce concrete under harsh working conditions and ensures work efficiency.
The aggregates are weighed during the loading process to ensure that the required concrete is produced, improve production efficiency, and the weighing accuracy is within 3%.
Only one operator is required to drive, load and mix the raw materials during the movement. The self-loading mixer is easy to operate, has high work efficiency and good mixing effect.
It has an independent water supply system to ensure the high quality of concrete.
The body of the mixer truck is of sufficient quality, the pipelines are protected when climbing without rollover, the temperature is adapted to the fine grain of the tank, the alloy is very durable, the body has dual tires, and it can bear loads in a vacuum.
A mixer truck is equivalent to a loader, a mixer, a transporter and more than 6 workers. It has automatic feeding, water supply, mixing, accurate electronic scales, intelligent batching calculation system, large-capacity water tank and water injection system. The body is equipped with a Yuchai engine. Four cubic meters of concrete can be produced in 12 minutes.
The work environment is not limited to any location, and it can be used with confidence in cities, rural areas, mountainous areas, and plateaus. The production quality of regular manufacturers is guaranteed, and you can easily get a license plate and hit the road immediately.
"With its high-level automated production technology, it can do automatic feeding, automatic water addition, automatic mixing, automatic rotation and unloading, etc. There is no need to worry about ingredients. The mixer truck has its own ingredients function.
Electronic scales and batching systems cooperate with each other to strictly control the weight and proportion of raw materials."
| Overall Parameter | |
| Model | HR3200L |
| Dimension (L×W×H) | 5900*2350*3900mm |
| Weight | 7500 kg |
| Performance | |
| Mixing Drum Capacity | Drum Capacity 3200L,Concrete Output: 2.0m³ Per Batch |
| Production Speed | Production speed: 7tanks/h |
| Traveling Speed | Low Speed: 0-25km/hour / High Speed: 0-40km/hour |
| Drum Rotation | Horizontal rotation 270° |
| Transmission Type | 4*4 |
| Drive axle | 2.0T wheel reduction axle |
| Tires | 16/70-R22.5 |
| Bucket capacity(m3) | 0.5 |
| Mixing capacity(m3) | ≥1.8 |
| Reduction ratio | 1:28 |
| Rotating speed(laps/minute) | ≥ 15 laps/minute |
| Reducer | Made in China |
| Gradeabiliy | 30° |
| Engine | |
| Model | Yuchai 4102 supercharged |
| Manufacturer | YUCHAI |
| Rated Power | 78kw |
| Emission standards | Euro II |
1.Are you manufacture or trading company ?
we are a group company , include five middle-sized factory ,one high technology developer company and a professional internation trade company. Supply from design - production - publicity - sell -after sell work all the line service team .
2.What's the main products ?
mainly support construction machinery , such as loader , skid loader , excavator , mixer , concrete pump , road roller , crane and etc.
3.How long is the warranty period ?
Normally , products have one year guarantee period .
4.What is the MOQ ?
One set .
5.What's the policy for the agents ?
For agents ,SITC supply the dealer price for their area , and help to do advertising in their area , some exhibitions in agent area also be supplied . Each year , service engineer will go to the agents company to help them tread the technical questions.
6.What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
