Audited Supplier
Connection drawing
Machine technical parametersBrief Introduction
E-LC10/0.6L series is the servo-driven variable pitch system two-step fully-automatic pet stretch-blow molding machines(reheat). It has 4 to 10 cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide and other packing containers, which is made of plastic of crystalline type, such as PET and PC etc.
1).High Automatization
2).High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 15000-16000BPH(8-cavity), 19000-20000BPH(10-cavity)
5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost: Low consumption of electricity, air and water.
7).High Transparency: Easy maintenance, absolute safety, visual inspection, low noise.
The Blowing Machine Main Advantages:
(1). The all-electric design enables the machine to run at high speed with stability and precise positioning.
(2). An automatic conveying system increases efficiency in production without the need for manual intervention.
(3). Equipped with an advanced PLC control system and an intuitive touch screen control panel for accurate control.
(4). Stable independent linear operation system ensures simple and reliable operation.
(5). A unique infrared lamp heating system with precise temperature control ensures even heating of preforms and easy adjustment.
(6). The machine features an independent air storage system, meeting different pressure requirements for precise control of actions, pre-blow, and blowing.
(7). The cooling system effectively cools, preventing deformations of bottle necks caused by infrared lamp light during production.
(8). All actions are driven by cylinders and servos, eliminating the need for oil pumps, making it eco-friendly and pollution-free.
(9). Each action is equipped with a safety interlock device, automatically restoring to a safe state in case of faults, ensuring operator safety.
(10). High-pressure mold locking device ensures manufactured bottles have no noticeable parting lines.
(11). Achieves fully automated production, offering high investment returns, significantly boosting production efficiency, and simplifying operation and maintenance.
(12). Human-centric design allows easy understanding of gas paths, circuits, and action statuses, ensuring safety and reliability of operations.
(13). Switch between manual and automatic modes for convenient debugging and installation.
(14). Installation and use of the equipment are extremely straightforward.
(15). Optimized processes and control capabilities minimize waste production.
(16).Mold fixed by drawer design, mold changeover can be easily done in half hour.
| Item | UNIT | E-LC4/0.6L | E-LC4/2L | E-LC6/0.6L | E-LC6/2L | E-LC8/0.6L | E-LC10/0.6L | E-LC2/5L | E-LC4/5L |
| Max.Volume | L | 0.6 | 2.0 | 0.6 | 2.0 | 0.6 | 0.6 | 5.0 | 5.0 |
| Shift Servo | √ | √ | √ | √ | √ | √ | √ | √ | |
| Stretch Servo | √ | √ | √ | √ | √ | √ | √ | √ | |
| Clamping Servo | √ | √ | √ | √ | √ | √ | √ | √ | |
| Separate Preform servo | √ | √ | √ | √ | √ | √ | √ | √ | |
| Transport | √ | √ | √ | √ | √ | √ | * | √ | |
| Theoretical capacity | BPH | 9000 | 8000 | 13000 | 11000 | 16000 | 20000 | 2000 | 4000 |
| Cavity Number | CAVITY | 4 | 4 | 6 | 6 | 8 | 10 | 2 | 4 |
| Heating Pitch | MM | 38.1 | 38.1 | 38.1 | 38.1 | 38.1 | 38.1 | 63.5 | 63.5 |
| Heating Unit Group | SET | 2 | 2 | 3 | 3 | 4 | 6 | 4 | 8 |
| Infrared Lamp | PCS | 14 | 16 | 21 | 24 | 28 | 42 | 44 | 88 |
| Number of Bottle Holder | PCS | 106 | 106 | 148 | 148 | 166 | 188 | 91 | 162 |
| Preform Baked Count | TIMES | 10 | 10 | 10 | 10 | 10 | 10 | 24 | 26 |
| Max.Neck Dia | MM | 30 | 30 | 30 | 30 | 30 | 30 | 45 | 45 |
| Max.Bottle Diameter | MM | 72 | 112 | 72 | 112 | 72 | 72 | 210 | 210 |
| Max.Bottle Height | MM | 260 | 320 | 260 | 320 | 260 | 260 | 350 | 350 |
| Max.Preform Height | MM | 120 | 160 | 120 | 160 | 120 | 120 | 180 | 180 |
| Action Air Consumption | M³/MIN | 2 | 2 | 3 | 3 | 4 | 4 | 3 | 4 |
| Pressure of Action | Mpa | 0.8-0.85 | 0.8-0.85 | 0.8-0.85 | 0.8-0.85 | 0.8-0.85 | 0.8-0.85 | 0.8-0.85 | 0.8-0.85 |
| Blowing Air Consumption | M³/MIN | 8 | 8 | 10 | 10 | 12 | 16 | 10 | 16 |
| Pressure of Blowing | Mpa | 2.8-3.2 | 2.8-3.2 | 2.8-3.2 | 2.8-3.2 | 2.8-3.2 | 2.8-3.2 | 2.8-3.2 | 2.8-3.2 |
| Chiller Specification | HP | 8 | 8 | 10 | 10 | 10 | 16 | 10 | 16 |
| Machine Power | KW | <20 | <28 | <36 | <45 | <52 | <60 | <28 | <50 |
| Installed Power | KW | 160 | 170 | 200 | 220 | 240 | 300 | 180 | 320 |
| Size | M | 3.5*1.7*2.1 | 3.8*1.8*2.1 | 4.3*1.7*2.1 | 5.4*2.1*1.9 | 5.4*2.1*2.1 | 6.2*2.1*2.1 | 3.7*2.25*2.15 | 8.4*2.2*2.15 |
| Weight | KG | 4500 | 5000 | 6000 | 6500 | 7500 | 8200 | 6000 | 130000 |
| The theortical output is based on 500ml l ottle shape,the final production capacity is based on the preform,bottle design and volume. | |||||||||
| The high pressure air consumption is based on the 500ml bottle,the final con! | |||||||||
| Standard configuration:√ Non-configurable: * | |||||||||
Preform loading and transfer system:
Pitch system:
Machine configuration list:
| Name | Country | Brand |
| Inductive Sensor | Japan | Omron |
| Magnetic Sensor | Taiwan | KITA |
| AC contactor | France | Electric SA |
| Switching power supply | Taiwan | Delta |
| Acting valve | Japan | SMC |
| Blowing valve | Taiwan | Airtac |
| Cylinder | Japan | SMC |
| High pressure filter | Japan | SMC |
| High pressure pressure reducing valve | Japan | SMC |
| Silencer | Japan | SMC |
| Clamping rail | Taiwan | PHI |
| PLC | China | Xinje |
| Touch screen | China | Xinje |
| Servo motor | China | Xinje |
| Reducer | China | Xinje |
Taizhou Easy Star Machinery Co.,Ltd. is a professional manufacturer of blow molding machines,preforms and plastic molds in China. We can provide a full range of services, whether it is molds, production machines, complete production lines, E-star can give you the best solution.
E-star's main products are various types of blowing machines. Plastic molds and other series of products. The products have the advantages of high degree of automation and stable performance. And are well received by domestic and foreign customers. Among them. The full-electric blow molding machine has reached the international leading level, and the products are exported to Europe, America, the Middle East, Southeast Asia and other places. Even in harsh climates(cold or tropical),E-star blow molding machines can operate stably. We have pre-sales and after-sales service teams, so your machine can get the best guarantee.
With more than 20 years of development experience and a highly fexible production development team, we can discuss and customize requirements for each case to create a financial tool that meets your needs. Whether it is used in Beverages,Water, Edible oil,Daily necessities, Cosmetics,etc.,
E-star's blow molding machines can help you complete the production of PET bottles of various capacities.
Q:Where is your factory located?
A:Our factory,near Shanghai, located in Taizhou,China
Q:What is your trade term?
A:Normally FOB NINGBO, if customer country requires, also can accept L/C at sight.
Q:What is your payment term?
A:30% down payment against order confirmation, 70% balance payment prior shipment.
Q:Have blow machine 100% assembled well in stock?
A:No. All blow machine will be assembly produced according to your order.
Q:What is your delivery time?
A:Usually in 45-60days, depends on your projects.
Q:What about installing in customer factory?
A:After machine arrived at your factory, please prepare water, electric,air and preform, then we will arrange engineer to install machine and train your workers, the longest time to free install shall be in one week, you should afford engineer air tickets, food, hotel,transport.
Q:Guarantee time?
A:One and a half year guarantee, not man-made.
