2025 New 3 in 1 Compact Dehumidifying Dryer for Injection Molding Machine

ZCDE Series

3 in 1 Heatless

Dehumidifying Dryers-Energy Saving Type

ZCDE-50
Z:ZK Brand;CD:Compact Dehumidifying Dryers;E:Energy Saving Type;50:Hopper Capacities :50KGS

ZCDE series-energy saving type of 3 in 1compact dehumidifying dryers integrate thefunction of dehumidifying, drying, and two-stageconveying into one machine. The device consistsof 3 parts: dual tower dehumidifying, insulateddryer and stainless steel autoloader, The energysaving type simplifies the design of system whichreduces power consumption, high efficiency, ultraenergy saving up to 60%. The design of machineappearance is compact to save space, ideal tohigh demands on limited space of cleanworkshop. lt can move everywhere convenientlythanks to no requirement of cooling water formachines.The mechanical construction is simpleto enhance machine reliable. The series designparticularty for optic products. It adapts PLCcontroller with the superior features on easyoperation, stable function, low powerconsumption.The drying air flow ranges from25-400m* /hr. In addition, we design optic class 3in 1 compact heatless dehumidifying dryers(energy saving type ) for optic products to satisfywith customers'various demands.

Drying Procedure
1.Low dew-point -40° of dehumidified air will be obtained simultaneously byreducing pressure rapidly in the dehumidifying tower.
2.Excessive oil and water content from the compressed air supply of workshopwill be filtered before sending to dehumidified air will be continuously deliveredto close hopper dryer until moisture expelled to be dried.
3.-40°~-50° dew point of dehumidified air will be continuously delivered toclose hopper dryer until moisture expelled to dried.
4.Air was delivered in one way direction under the system which no requiredregeneration dehumidified air.
Features
1.To improve the quality of finished products greatly thanks to supply stabledehumidified air at -40°dew-point, controlled temperature precisely.
2.To integrate the function of dehumidifying, drying and two- stageconveying into single unit.Three -stage conveying function is optional .
3.Feeding system is equipped with shut -off valve to ensure no remainingmaterial in hopper tube.
4.Dehumidification system adopts double cooler structure to ensure lowerreturn air temperature and dew point.
5.Closed-loop circulation for dehumidified air & feeding system to avoid thepossibility of moisture regain for absorbing outside air during materialconveying.
6.Using imported superb parts which enhance function and extend servicelife for saving maintenance cost.
7.Perfect safety protection and fault indication system with multipleprotection device.

Model		ZCDE-25	ZCDE-50	ZCDE-75	ZCDE-100	ZCDE-150	ZCDE-200	ZCDE-300	ZCDE-400
Hopper Capacity	KG	25	50	75	100	150	200	300	400
Drying Blower Power(50/60HZ)	KW	0.25/0.29	0.37/0.5	0.55/0.62	0.75/0.83	1.1/1.2	1.5/1.7	2.2./2.5	3.0/3.45
Drying Heater Power(50/60HZ)	KW	3	4	4	6	9	12	15	18
Converying Blower Power(50/60HZ)	KW	1.1/1.2				1.5/1.7		2.2./2.5
Total Power	KW	4.4	5.5	5.5	7.9	11.6	15	19.4	23.2
Drying Time	H	≥4
Drying Point	ºC	Below -40
Drying Temperature	ºC	70~160
Drying Air Capacity(50/60HZ)	M³/Hr	30	70	82	120	155	195	305	410
Regeneartion Type		Heatless Regeneration (Energy Saving)
Weight	KG	180	190	225	226	227	228	229	230
Machine Dimension	L(MM)	820	950	950	1090	1410	1410	1690	1774
	W(MM)	762	720	720	850	950	950	1019	1103
	H(MM)	1800	2050	2200	2270	2550	2700	2835	2801

ZCDH Series

3 in 1Compact

Dehumidifying Dryers-Honeycomb Rotor Type

ZCDH-50
Z:ZK Brand;CD: Compact Dehumidifying Dry;H: Honeycomb Rotor Type;50:Hopper Capacities :50KGS

ZCDH seres-3 in 1 compact dehumidifying dryer integrate the function of dehumidifying,drying and two-stage conveying into one machine.The device consists of 3 parts:honeycomb rotor dehumidifying,insulated dryer and stainless steel auto loader,with compact design to save space,ideal to high demands of automation system and limited working space.lt adapts PLC controller with the superior features on easy operation,stable function,and low power consumption.The drying air flow ranges from 25-400m/hr.In addition,we design optic class 3 in 1 compact dehumidifying dryers for optic products to satisfy with customers' various demands.

Features

1.3 in 1 compact dehumidifying dryers are equipped with honeycomb rotorwhich can acquire stable low dew-point drying air.
2.Using silica gel absorption honeycomb dehumidification, regenerationtemperature only 150°C, compared with molecular sieve structure needsmore than 200°Cregeneration temperature to save energy.
3.To integrate the function of dehumidifying,drying and two-stageconveying into single unit .Three-stage conveying function is optional.
4.Conveying system is equipped with shut -off valve to ensure no remainingmaterial in hopper tube.
5.The dehumidifying system employ double coolers for ensuring lowerreturn air temperature and dew-point value.
6.Optical-class models use mirror polished treatment on the materialcontact surface to avoid material contamination and collocate conveying system with closed-loop in order to avoid the possibility of moistureregain for absorbing outside air during material conveying.
7.Completed safety protection and error indicator with multiple protectiondevice.
8.Return air filter is installed inside to ensure no powder & dust contamin-ation to the honeycomb rotor.  

Model		ZCDH-25	ZCDH-50	ZCDH-75	ZCDH-100	ZCDH-150	ZCDH-200	ZCDH-300	ZCDH-400
Hopper Capacity	KG	25	50	75	100	150	200	300	400
Drying Blower Power(50/60HZ)	KW	0.25/0.29	0.37/0.5	0.55/0.62	0.75/0.83	1.1/1.2	1.5/1.7	2.2/2.5	3.0/3.45
Drying Heater Power(50/60HZ)	KW	3	4	4	6	9	12	15	18
Conveying Blower Power( 50/60HZ)	KW	1.1/1.2				1.5/1.7		2.2/2.5
Regenerative Blower Power(50/60Hz)	KW	0.18/0.2	0.18/0.2	0.18/0.2	0.25/0.29	0.37/0.5	0.55/0.62	0.55/0.62	0.75/0.83
Regenerative Heatin Power	KW	2	2	2	3	4	6	6	8
Total Power	KW	6.7	7.7	7.7	11.2	16	21.6	26	32
Drying Time	H	≥4
Drying Point	ºC	Below-40
Drying Temperature	ºC	70~160
Drying Air Capacity (50/60HZ)	M³/Hr	50	80	80	120	120	200	200	200
Weignt	KG	200	215	245	280	330	350	400	460
Machine Dimension	L(MM)	950	950	950	1090	1410	1410	1690	1774
	W(MM)	720	720	720	850	950	950	1019	1103
	H(MM)	2050	2050	2200	2270	2550	2700	2835	2801

Note:We reserve the rights to change the spec&design without further notice.

 

APPLICATION SCENARIOS

Main Products

Our company's main business is divided into three divisions. The Injection Molding Division provides injection - molding - machine peripheral equipment. The Intelligent Manufacturing Division handles plant - wide water, electricity, central feeding, and MES data management systems. The Robot Automation Division focuses on non - standard manipulator tooling fixture design and multi - joint robot automation applications.

Guangdong Zoneke Technology Co, Ltd founded in 2014 and located in Hengli Town, Dongguan City, Guangdong province of China.Zoneke is an intelligent manufacturing high-tech enterprise and integrating R&D, production, sales and service. Zoneke empower the manufacturing INTELLIGENT!
Zoneke′s concept of "Humanizing science and technology, making better things with intelligence". Zoneke is committed to product R&D and innovation, and constantly improves product quality to meet market demand. Widely used in electronics, optics, medical, auto parts, home appliances and other industries.
The company′s technology originated from Europe and industrial automation as design concepts. Zoneke continuously develops innovative new products and also get the patents. The company has ISO9001 certified quality management system and advanced production management system to provide customers quality products and service.
We are dedicated to looking for global distributors and win-win cooperation.

These are pictures of our factory workshop. It's spacious and well - lit, with a clean green floor. Various machines are neatly arranged, creating an organized production environment. Workers are seen operating and maintaining the equipment, presenting a busy and orderly scene.

The image displays a diverse array of our company's certificates, encompassing business licenses, internationally - recognized CE and SGS certifications, the prestigious ISO 9001 quality management system accreditation, utility model patents, and honors for contract compliance and high credit ratings. These attest to our strict adherence to regulations, robust quality control, innovation prowess, and solid business credibility in the industry.

Our exhibitions are professional, showing ZONEKE's advanced products. Booths are well-designed in blue and white. Visitors are interested in our equipment. It's a great platform to show our tech skills and meet clients

Our company has established partnerships with renowned companies including LedLink, TRULY, KONKA, YTOT, Amphenol, and DM. These partnerships reflect our strong reputation and capability in the industry.

We use different transports like air, truck and sea freight, and partner with TNT, UPS, FedEx, EMS and DHL for reliable delivery.Ensure that goods are delivered to you efficiently and safely.

• Q: How to pay and What is your payment term?
  A: We accept payment by T/T, WESTERN UNION or BANK TRANFER, etc.
  The payment method is 50% prepayment, 50% balance before cargo delivery.
• Q: What's your delivery time?
  A: 3-7days if stocks available.
  15-30days if equipment customized or machines out of stock.
• Q: How can you guarantee the qualified equipments?
  A: Zoneke has the strict inspection process during production.
  QC will provide inspection video and pictures for double check when production finished.
  We will send the troubleshooting and solutions if any dissatisfaction.
  Buffer stock of components and parts, easily worn parts.
• Q: What's your warranty time?
  A: Our standard warranty is 1 years.
  2 years or longer can be workable based on some conditions.
• Q: What's the packing ?
  A: Standard export wooden box.
• Q: Are you a manufacturer?
  A: Yes, ZONEKE is a professional manufacturer established in 2014 and specialized in designing and producing plastic auxiliary equipments. OEM and ODM are welcome.
• Q: What is plastic auxiliary equipment?
  A: According to the functions, there are three kinds of plastic auxiliary equipments including feeding equipment, temperature control equipment and granulating and recycling equipment of rim leftover. And these devices provide a variety of functions in plastics process. Feeding system providing high-quality material.
• Q: How to choose the suitable dryer?
  A: Drying hopper capacity (kg) = output (kg/hr) ×drying time (hr)
  Actual drying hopper capacity (kg) =drying hopper capacity (kg) ×1.2(safety factor)
  Notes: The hopper capacity of ZKD series is calculated by the material density of 0.6 kg/L. If there are some differences in customer's material density, hopper capacity should be adjusted proportionally.