Audited Supplier
OMS-371S
Online
1 Year
Safety System
Elevator
5000kg
11-20
1.00-2.00m/s
DC
Relay Control
Lift Chain
Public Traffic
Profile Guide
Proximity Overload Device
AC/DC12-24V
Fixed Under The Elevator Cabin
5000kg
Inductive Magnetic
Overload Turnover Point&Le
8-12mm
6
Weight/Percentage
3PCS
1A125VAC,2A 30VDC
SUMMIT
Box+Carton
44X34X36 cm, 60PCS/CTN
Ningbo China
8431310090
Product Description
Elevator under car floor load weight control system
OMS-710S
Description:
The elevator load weighing device OMS-700 series is one kind of integrated overload protection device for elevator overload detection and it is typically mounted under the the elevator lift cabin,(it is available to mount under the rope hitch plate) and so on and there are 3 kinds of output to meet different demand: on-off output signal, voltage analog output (0V~10V or -10~10V), and the current analog output(4~20mV)With OMS-700 series in use, passengers can be sure that the load in the elevator car does not exceed the elevator's capacity. The car load is measured by the high sensitive hall effect inductive proximity sensor. The data is transmitted as switch output, current or voltage signals to the control and drive systems.
Features:
- Switch signal
- Integrated design construction
- High sensitive hall sensor measurement
- Durable, reliable and dependable
- Favorable price
- Economical with compact structure,easy to use and installation
- Suitable for the passenger elevator with active car bottom
- Multiple output functions and comprehensive types
- Continuous linear output
- Voltage Analog output or current analog output is feasible
| Control Unit: | OMS-710S | OMS-720S | OMS-730S |
| Operation Voltage | AC/DC16-48V | ||
| Power | 4W | ||
| Sensing Object | Magnetic steel | ||
| Relay Number | 3PCS (overload,full,empty load ) | ||
| Contact Load | 1A125VAC,2A 30VDC | ||
| Display Type | 4 digits 0.36 inch LED | ||
| Display mode | Weight/percentage | ||
| Key number | 6 | ||
| Sensing distance range | 8-12mm | ||
| Output | Switch(on-off, relay) output | Voltage output (0V~10V) | Current output (4~20mA) |
| Signal Hold Voltage | AC/DC10-45V | ||
| Measuring precision | 0.1% | ||
| Operation temperature | -40~-+70ºC | ||
| Size | 105X45X45mm | ||
| Weight | 240g | ||
Elevator load weighing system OMS-700 series Size:
Install at rope hitch
Install under the elevator cabin floor 
Broad selection: Load weighing system in any location of elevator, Using SUMMIT solutions loads can be weighed in every imaginable situation.We offer you flexible, modular solutions for both requirements, and wide experience with modernization projects. we attention to detail in the design of their modular system allows great freedom to configure load weighing systems to suit all types of cabin.
Universal device for working with different load cells:
- Under Elevator cabin floors:UC-AP-OMS-560
- Clamping on wire rope:WDS series, RH-SM-OMS-820
- Machine bed frane:RHP-X-OMS-560
- Between the wire rope hitch plate:RHP-E-OMS-520
