220kv 50~63mva IEC60076 Standard an Cooling Two-Winding Power Transformer Price Three Phase

Price $154000.00 Compare
Min Order 1 Piece
Shipping From Guangdong, China
Popularity 327 people viewed
Quantity
+-
 

Pearl Electric Co., Ltd.

VIP   Audited Supplier 15 years
Profile Certified by SGS/BV
PEO-S-63, 000/220/33
Power, Power Transmission
Three
Core-type Transformer
Oil-immersed Type Transformer
Two-winding Transformer
ISO9001-2000, ISO9001, CCC
Power Transformer, Oil Immersed Tranformer
High Frequency
U
Pearl
Power Transformer
IEC 60076
63 Mva
220kv
33kv
Onan/Onaf
as Per IEC Standard
Silicon Steel
Copper/Aluminum
60/65K
Dyn11
a-Class
Mineral Oil as Per IEC 60296
as Per IEC Standard
as Per IEC Standard
PEARL ElECTRIC(PE)
Wooden Pallet, Wooden Case
As per manufacturer's standard design
China
8504220000
Product Description
220kv 50~63mva Power Transformer Price Three Phase
Product Description

 


 

 
01Production DescriptionsOil Immersed Power Transformer
02Reference standardsIEC 60076
03Capacity63MVA
04Voltage (HV)  220kV
05Voltage (LV)  33kV
06Applied inPower Plant
07Impedance %8%
08Connections (Vector Group)Dyn11/Yyn0
09Frequency 50Hz/60Hz
10Core materialsSilicon Steel
11Winding materialsCopper/Aluminum
12Noise Level (dBA)As per IEC Specifications 
13Cooling methodONAN/ONAF
14Optional AccessoriesTemperature sensor
15Temperature control
16Cooling fans
17Skid-type underbase
18Transformer wheels
19Current transformer
20Protective Enclosure(IP2X)

Project Reference
1.  88kV power transformer for AC traction subsation in South Africa.
2.  230kV power transformer for Gas power station in Myanmar.
3.  110kV power transformer for hydropower project in Vietnam.
4.  .....


Company Profile

Pearl Electric Co.,Ltd.(Hereinafter referred to as Pearl Electric) located in Panyu District, Guangzhou City, which is an enterprise mainly engaged in the R&D and manufacture of power transmission and transform.

Pearl Electric is the former state-owned Panyu Electrical Motor Factory established in 1958. To facilitate Company's development, the Company was formally renamed as Pearl Electric Co., Ltd. in January, 2010. Pearl Electric occupies a factory area of 10.5 hectares, with more than 7.2 hectares of modern factory building. Pearl Electric has more than 600 employees and more than 600 sets of specialized manufacturing equipment.

Pearl Electric is engaged in the research and development, production and operation of dry-type transformers of 35kV and below, combined transformers, prefabricated substations, reactors, oil-immersed power transformers of 220kV and below , transmission and distribution and Control equipment, etc. The annual output of transformers exceed 20 million kVA, and the pad-mounted products exceed 4000 sets.

Our company is committed to providing customers with safe, efficient and intelligent power transmission solutions, and has become a leading enterprise in the domestic nuclear power dry-type transformer and new energy box-type substation industry and a leading enterprise in the environmental protection and energy-saving transformer industry.


Annual Production Capability
Dry-type transformer      15,000MVA
Oil-immersed Distribution Transformer18,000MVA
110kV &220kV Power Transformer300 units
Substation Transformer10,000 units
 
Certifications

We have established a sound quality management system, and have passed the certification of ISO9001:2015 quality management system, ISO14001:2015 environmental management system, and ISO45001:2018 occupational health and safety management system.

In order to ensure product quality and in order to meet the development and supply of our dry-type transformers in overseas international markets, we all participate in type and special tests of internationally recognized independent testing laboratories, and obtain relevant reports.

Partner

 
Packaging & Shipping

 
Pearl Electric's Technology

Core:

- Our transformer's core is made of high quality cold rolled grain oriented silicon steel sheet with high magnetic permeability. It is using full 45° slope lamination, so that the noload loss and the no-load current are reduced efficiently.
 
LV Winding:
- LV windings are adopting superior foil conductors or made of 100% copper wire, thus to obtain better amperturn balance and reduce more transverse magnetic flux leakage. Then to greatly improves transformer's anti-short circuit capability.
- Excellent design of oil passage structure, greatly increasing the coils' heat dispersion effect. It helps to decrease temperature rise of the LV winding and improve transformers' overload capability.

HV Winding
- HV windings are made of superior copperconductor wires. Adopting fiberglass to reinforced insulation.
- HV windings are adopted optimized structure to improve transformer's distribution of electric field.
- We use our existing technology calculate and analysis Lightning wave process simulation. Then substantially improving product's antilighting capability.

Insulation construction:
- Aclass level Insulation construction. The high-voltage coil and low-voltage coil are placed with the same center. Between the coils, use the thin paper cylinder with little oil clearance construction.

Tank:
- The tank is jointed with highquality steel. The surface is eliminated rust phosphate coating and painted with the type of FVC anticorrosive paint. It has ability to prevent the corrosion from oil and chemical matter. It can be broadly applied to outdoors with bad environment for its contour artistic, easily installation and maintenance free.

Components:
- All the power transformers equipped with highvoltage bushing, low-voltage bushing, oil-relesase valve earthling boilt, lifting board, name plate, pressure vale and so on. The transformers which are over 800kVA are equipped with signal thermometer and gas relay.
 

 

FAQ

Q: Are you a Manufacturer, factory or Trading company ?   
A: Yes, We are engaging in the research and development, production and operation of transformer for over 60 years.

Q: What's your warranty terms?
A: We offer 12 months warranty time.

Q: Production Time?
A: 30 to 45 days or depending on order requirements.

Q: What's your payment terms?
A: T/T , L/C or negotiation.

Q: How do you conduct quality control in your factory?
A: We implement 100% QC inspection to ensure every product is qualified. We have over 10 times QC inspections during the manufacturing process from raw material to the final products.

Q: Do you have the products in stock?
A: Normally no. All our products produce depending to your order quantity.

Q: How can I trust you ?
A: Pearl Electric is the former state-owned Panyu Electrical Motor Factory established in 1958, Pearl Electric occupies a factory area of 10.5 hectares, with more than 7.2 hectares of modern factory building. Pearl Electric has more than 600 employees and more than 600 sets of specialized manufacturing equipment. We have many patent certificates, CE certificate, KEMA certificate, ISO9001 certificate. Our products are widely used all around the world. We believe that we can provide you products of good quality with competitive price. We are the audited diamond supplier of Made-In-China.

Q: What should provide to make custom transformer ?
A: Technical drawing and technical specification document are  the best, or you can tell us some details technical specification date as below "Quotation and Ordering Required Information".


Q: Could I have your catalog and price list for trial order in MOQ quantity?
A: All of our products are showing on Made-in-China or official website, you are always welcome to ask us to get more information directly.




 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA