Insulating Glass Automatic Processing Flexible Georgian Bars Super Spacer Machinery

FOR CUSTOMIZATION, PLEASE CONTACT US.
WLBZ1825-CF  Hot sales
 

The whole insulating glass production line includes 7 parts: (from left to right)

1, The Loading section(with Low-E checking)

2, The washing and drying section
3, The conveyor section with door
4, Tilting table
5, The georgian bars application (can make decoration frame)
6, The panel press & gas filling section
7, The unloading section

Section 01: Input section  The glass will be transfered to section 2(washing and drying section).Carbon fiber conductive brushes are used for coating glass and Low-e glass detection.

Section 02: Washing and drying section The washing zone and water tank are made of stainless steel and corrosion-proof material, water heating function is available. And all bearing bases are made of stainless steel.

Section 03: Convery and light inspection section This section with open design, if the glass is not clean enough, the worker can go through the back door to wipe the glass.

Section 04: The tilting table This table can be tilted when we place the super spacer on glass.The tilt table has suck and release function, the operator can place the super spacer very easy and safe.

Section 05: Georgian bars application The lines on the board can help to place the decoration frame.
 

Each suction cup in the panel press equipped with one separate logic valve, and the suction cups work partitioned according to the size of the glass.
 

Section 07: Output section The insulated glass will be transfered to next section for secondary sealant .

1.Stainless steel material and corrosion-resistant material adopted for all washing area, water tank, and waterway system.

2.The 6 brushes are driven by 6 motors independently, which will not affect the other motors working when any of them has problems.

3. The connection mode of brush and motor is coupling, the brush motor and brush are directly connected, and there will be no slip or motor idling phenomenon.

4.The front 3 brushes are soft brushes with diameter 0.1 mm, which are suitable for Low-E glass washing, to prevent the film damage, the back 3 brushes are hard brushes with diameter 0.2 mm, which are suitable for washing ordinary glass.

1.Denser steel frame for a stronger machine body.

The panel press is controlled by Servo motor.
 

2. The front pressing plate steel frame is with two layers, the flatness can be adjusted. It ensures that the panel pressing achieve the best flatness after long-term use.
 

3.Each suction cup in the panel press equipped with one separate logic valve, and the suction cups work partitioned according to the size of the glass.
 

4. Automatic online gas filling: Suitable for double IGU & triple IGU; Argon inflation is from bottom side.

After-sales:
-We can provide weekly production report to let you clear of production progrss and production details;

-Providing equipment installation, debugging, and personnel training service and English operation manuals;

-We can help you to arrange transportation till to your location;
- One year after installation, exclude wearing parts, supply lifetime maintenance and technical service.

Why Choose Us

Exhibitions

1. Which countries does your products exported to?
A: Our equipments have been exported to 50 Countries and regions, such as South Amercia,South
Africa,India,Turkey,Canada,Russia,European Countries and so on.

2. How to use your glass processing machiney?
A: We have paper instructions in English, and we will teach till you do it well.

3. What about quality control?
A: The whole production procedure will be under regular inspection and strict quality control. We'll inspect every component before using. The complete machine will be tested to make sure it can work very well before being out of the factory.