Audited Supplier
BETTER
Electrolyzer
Stainless Steel
<50L
Filling Tube
Atmospheric
Ribbon Agitator
Spray Tower Reactor
Outside (Inside) Coil Heating
Combined
Automatic
New
Better
Overseas Packing
China
Product Description
Automatic Acid Dilution System
Outline
The proposal is dedicated to the acid distribution system, mainly used for the preparation and cooling of dilute acid solution.
The system has a designed capacity: the electrolyte preparation of 1.5m3 / hour.
The acid dilution equipment can transport diluted acid to the designated sulfuric acid storage tank; the equipment also comes with display of the ratio of the proportion of acid, as well as the display for temperature of acid.
This proposal is consists of a system of 1.5m3 / hour equipment to undertake the preparation of a variety of specific gravity of the electrolyte.
This is an automatic online acid dilution, with automatic online density testing process.
Process
1. Concentrated acid (Prepared by the user)
1.1 Concentrated acid unloading
Park the acid transport cart near by the concentrated acid storage tank, after setting the specified concentrated acid storage tack(8m3) on the touch screen., press the "run" button. The corresponding valve will automatically open. At the same time, the storage tank breathing valve will open automatically. The concentrated acid will be pumped into the storage tank. The electronic scale on the tank will display the weight of the acid at all time. Once the weight of the acid reaches the pre-set weight limit, an alarm with blinking light will sound. At this time, the valves will automatically close and stop pumping acid into the storage tank. The tank is also equipped with an electronic level meter display apparatus having upper and lower level limits. When concentrated acid level reaches the upper limit position, the sound and light alarm will sound and turn off the valve. The double protection on the equipment ensures the concentrated acid does not overflow. All concentrated acid pipes are double tube and equipped with leak detection alarm system. In order to adapt to the small jar of concentrated acid manual pour acid (0.6m3), the addition of a hand-poured acid concentrated acid tank is in place, The loading process is the same as the above application.
Considering the accuracy of the weighting, all tubing and piping in/out from the tank are soft connections.
1.2 Concentrated acid transport
The principle of Automatic acid dilution is mixing according to the mass (hereinafter referred to as weight) percent concentration: first, find out the target weight percent concentration by converting target dilute acid density using conversion chart. Then input both weight percent concentration, and the total weight of the diluted acid you are targeting, in the touch screen (total volume you want, must be ≤ 5m3), the PLC will automatically calculate the volume of pure water and the volume of the concentrated acid required for such solution. Acid from the concentrated acid storage tank will then, be delivered to the concentrated acid buffer tank on the online mixing and cooling device. Each unit has a separate concentrated acid buffer tank. The concentrated acid buffer tank equips with an overflow tank to prevent spills in case of any control that does not work properly.
Specific to which online mixing and cooling device the concentrated acid is sent to, is control by the corresponding pneumatic valve. Each pneumatic valve is in series with a manual valve, for easier maintenance access to the pneumatic valves later on. All concentrated acid pipes are double protected, and is equipped with leak detection alarm system.
When the concentrated acid level reaches the set point, PLC signals the pneumatic valve to close automatically; concentrated acid pump will also shut down automatically.
2. Pure Water
Acid dilution system comes with a pure water supply system. With a 5m3 water tanks (including electronic level gauge); one pure water pneumatic pump; one set of connecting piping and valves to online mixing and cooling device.
3. Acid Mixing
3.1 Principle of acid mixing:
Start equipped acid "run" button, pneumatic valve of the cooling water, cooling water pump (including cooling tower fan) starts. PLC calculates the dosage of concentrated acid and pure water, with electromagnetic flow meter and pneumatic control valve to control the flow rate. The gravity flow into graphite dilution condenser, carry out mixing and heat exchange. The chilled diluted acid will then, enter the gravity fine-adjustment device. When the concentrated acid and pure water reaches the set amount of dosage, early ratio and cooling cycle stops, the gravity fine-adjustment device will fine-tune to the target value.
The gravity fine-adjustment device equipped with two temperature monitoring points: when the temperature is too high (≥ 80 ° C) concentrated acid buffer tank to the graphite dilution condenser concentrated acid pneumatic valve will automatically shut down to stop adding acid, pneumatic valve automatically opens when the temperature drops below the set temperature (≤ 60 ° C), continue to add acid. The other measurement point is set near the entrance of the cyclic acid, in the gravity fine-adjustment device. The difference between the two temperatures reflects the efficiency of the heat exchanger. When the temperatures of the two monitoring points are both lower than 40C °, the mixing is complete. Circulation pump, cooling water pneumatic valve closes automatically. Cooling water pumps and cooling towers will also stop running.
3.2 Each set with acid dilution system contains one set of online acid mixing and cooling device, one set of the gravity fine-adjustment device; two sets of temperature control device; one set of system piping and valves; one set of cooling water circulation device.
3.3 Various processes running status, each parameter settings, display and control, all done by touch screen.
4. Acid output section
4.1 Each target acid from acid mixing device can only be delivered to the specified dilute acid tank.
4.2 Each group the dilute acid tanks are equipped with one set of electronic level gauge, one set of visual level, overflow acid pipe and one set of overflow tank (with overflow sound and light alarm device).
4.3 Each group of dilute acid tank (with different gravity) is equipped with one set of fluorine alloy acid pump. On the touch screen, you can start mixing any type of target diluted acid to the acid storage tank of your choice.
5. Control section
5.1 The control section uses the combination of the PLC + touch screen. Through the touch screen, we can set the equipment operating parameters. Parameters such as weight percentage concentration of target dilute acid and dilute acid total weight, can be input to the touch screen. With the choice of acid mixing equipment, the system will prepare the target acid in accordance with the set parameters. The process is fully automated.
At the end of the target acid preparation, the diluted acid can be delivered to the designated dilute acid tank.
5.2 Real-time display of various equipment operating status (such as level low and high, acid weight in the concentrated acid storage tank, acid tank temperature, liquid level with the acid tank, pumps and valves to start or stop)
5.3 Each process within the system has interlock control. Any electronic level gauge reaches the upper limit position, there will be sound and light alarm, and at the same time all corresponding electric valve will close and all related equipment will stop.
| NO. | Main Component | Specification& Model | Qty. | Remark |
| 1 | New graphite dilution condenser | 20m2 | 1 pc | Graphite/with reactor |
| 2 | Support and panel | 1 set | A3 steel, anti-corrosion | |
| 3 | Acid regulation tank | 5m3 | 2pcs | PP |
| 4 | Tee flow meter | DN25 | 2pcs | PVC |
| 5 | Concentrated acid pneumatic valve | DN25 | 1 pc | PVC |
| 6 | Pure water pneumatic valve | DN25 | 1 pc | PVC |
| 7 | Diluted acid pneumatic valve | DN25 | 3pcs | PVC |
| 8 | Online density monitor | 1.1~1.4 | 1 set | |
| 9 | Overhead Pure Water Tank | 5m3 | 1pc | PE |
| 10 | Overhead Concentrated Acid Tank | 3m3 | 1pc | PE thickened |
| 11 | Overhead Diluted Acid Tank | 5m3 | 3pcs | PE thickened |
| 12 | Circulating magnetic drive pump | Q=15m3/h, H=15m | 2pcs | PVDF |
| 13 | Temperature control equipment | PT-100 | 3 sets | |
| 14 | Liquid level sensor | High level limit and interlock alarm | 3 sets | |
| 15 | Acid mixing system piping and valve | 1 set | ||
| 16 | Cooling tower | 50m3/h | 1pc | FRP |
| 17 | Cooling circulation pump | 50m3/h, range: 18m | 2pcs | |
| 18 | Pipe and valve for cooling system | 1 set | ||
| 19 | Electronic control cabinet | PLC, HMI | 1 set |
Remark:
- This above excludes the concentrated acid storage, and the corresponding civil construction.
- The diluted acid after acid dilution is about 40ºC
Automatic Acid Cooling System (1.5m3/h)
| No. | Name | Specification | Qty. | Remark |
| 1 | Air cooling water chiller | 15P | 1 set | |
| 2 | Cooling water buffer storage tank | 0.5m3 | 1pc | PP/ heat presentation |
| 3 | Cooling water circulating pump | 12.5m3/h, 2.2kw | 1pc | |
| 4 | Plate-type heat exchanger | 1.6m2 | 1pc | |
| 5 | Valve control box | Q=15m3/h, H=15m | 1pc | PP |
| 6 | Pneumatic ball valve | DN40 | 8 pcs | |
| 7 | Insulation acid storage tank | 5m3 | 2pcs | PP/ heat presentation |
| 8 | Circulating magnetic pump | |||
| 9 | temperature control device | PT-100 | 2 sets | |
| 10 | Liquid level sensor | High level limit and interlock alarm | 2 sets | PP |
| 11 | Control cabinet | PLC+touch screen | 1 set | |
| 12 | Pipe, valve and auxiliary materials inside the system | 1 set |
Automatic Acid Dilution System
Outline
The proposal is dedicated to the acid distribution system, mainly used for the preparation and cooling of dilute acid solution.
The system has a designed capacity: the electrolyte preparation of 1.5m3 / hour.
The acid dilution equipment can transport diluted acid to the designated sulfuric acid storage tank; the equipment also comes with display of the ratio of the proportion of acid, as well as the display for temperature of acid.
This proposal is consists of a system of 1.5m3 / hour equipment to undertake the preparation of a variety of specific gravity of the electrolyte.
This is an automatic online acid dilution, with automatic online density testing process.
Process
1. Concentrated acid (Prepared by the user)
1.1 Concentrated acid unloading
Park the acid transport cart near by the concentrated acid storage tank, after setting the specified concentrated acid storage tack(8m3) on the touch screen., press the "run" button. The corresponding valve will automatically open. At the same time, the storage tank breathing valve will open automatically. The concentrated acid will be pumped into the storage tank. The electronic scale on the tank will display the weight of the acid at all time. Once the weight of the acid reaches the pre-set weight limit, an alarm with blinking light will sound. At this time, the valves will automatically close and stop pumping acid into the storage tank. The tank is also equipped with an electronic level meter display apparatus having upper and lower level limits. When concentrated acid level reaches the upper limit position, the sound and light alarm will sound and turn off the valve. The double protection on the equipment ensures the concentrated acid does not overflow. All concentrated acid pipes are double tube and equipped with leak detection alarm system. In order to adapt to the small jar of concentrated acid manual pour acid (0.6m3), the addition of a hand-poured acid concentrated acid tank is in place, The loading process is the same as the above application.
Considering the accuracy of the weighting, all tubing and piping in/out from the tank are soft connections.
1.2 Concentrated acid transport
The principle of Automatic acid dilution is mixing according to the mass (hereinafter referred to as weight) percent concentration: first, find out the target weight percent concentration by converting target dilute acid density using conversion chart. Then input both weight percent concentration, and the total weight of the diluted acid you are targeting, in the touch screen (total volume you want, must be ≤ 5m3), the PLC will automatically calculate the volume of pure water and the volume of the concentrated acid required for such solution. Acid from the concentrated acid storage tank will then, be delivered to the concentrated acid buffer tank on the online mixing and cooling device. Each unit has a separate concentrated acid buffer tank. The concentrated acid buffer tank equips with an overflow tank to prevent spills in case of any control that does not work properly.
Specific to which online mixing and cooling device the concentrated acid is sent to, is control by the corresponding pneumatic valve. Each pneumatic valve is in series with a manual valve, for easier maintenance access to the pneumatic valves later on. All concentrated acid pipes are double protected, and is equipped with leak detection alarm system.
When the concentrated acid level reaches the set point, PLC signals the pneumatic valve to close automatically; concentrated acid pump will also shut down automatically.
2. Pure Water
Acid dilution system comes with a pure water supply system. With a 5m3 water tanks (including electronic level gauge); one pure water pneumatic pump; one set of connecting piping and valves to online mixing and cooling device.
3. Acid Mixing
3.1 Principle of acid mixing:
Start equipped acid "run" button, pneumatic valve of the cooling water, cooling water pump (including cooling tower fan) starts. PLC calculates the dosage of concentrated acid and pure water, with electromagnetic flow meter and pneumatic control valve to control the flow rate. The gravity flow into graphite dilution condenser, carry out mixing and heat exchange. The chilled diluted acid will then, enter the gravity fine-adjustment device. When the concentrated acid and pure water reaches the set amount of dosage, early ratio and cooling cycle stops, the gravity fine-adjustment device will fine-tune to the target value.
The gravity fine-adjustment device equipped with two temperature monitoring points: when the temperature is too high (≥ 80 ° C) concentrated acid buffer tank to the graphite dilution condenser concentrated acid pneumatic valve will automatically shut down to stop adding acid, pneumatic valve automatically opens when the temperature drops below the set temperature (≤ 60 ° C), continue to add acid. The other measurement point is set near the entrance of the cyclic acid, in the gravity fine-adjustment device. The difference between the two temperatures reflects the efficiency of the heat exchanger. When the temperatures of the two monitoring points are both lower than 40C °, the mixing is complete. Circulation pump, cooling water pneumatic valve closes automatically. Cooling water pumps and cooling towers will also stop running.
3.2 Each set with acid dilution system contains one set of online acid mixing and cooling device, one set of the gravity fine-adjustment device; two sets of temperature control device; one set of system piping and valves; one set of cooling water circulation device.
3.3 Various processes running status, each parameter settings, display and control, all done by touch screen.
4. Acid output section
4.1 Each target acid from acid mixing device can only be delivered to the specified dilute acid tank.
4.2 Each group the dilute acid tanks are equipped with one set of electronic level gauge, one set of visual level, overflow acid pipe and one set of overflow tank (with overflow sound and light alarm device).
4.3 Each group of dilute acid tank (with different gravity) is equipped with one set of fluorine alloy acid pump. On the touch screen, you can start mixing any type of target diluted acid to the acid storage tank of your choice.
5. Control section
5.1 The control section uses the combination of the PLC + touch screen. Through the touch screen, we can set the equipment operating parameters. Parameters such as weight percentage concentration of target dilute acid and dilute acid total weight, can be input to the touch screen. With the choice of acid mixing equipment, the system will prepare the target acid in accordance with the set parameters. The process is fully automated.
At the end of the target acid preparation, the diluted acid can be delivered to the designated dilute acid tank.
5.2 Real-time display of various equipment operating status (such as level low and high, acid weight in the concentrated acid storage tank, acid tank temperature, liquid level with the acid tank, pumps and valves to start or stop)
5.3 Each process within the system has interlock control. Any electronic level gauge reaches the upper limit position, there will be sound and light alarm, and at the same time all corresponding electric valve will close and all related equipment will stop.
| NO. | Main Component | Specification& Model | Qty. | Remark |
| 1 | New graphite dilution condenser | 20m2 | 1 pc | Graphite/with reactor |
| 2 | Support and panel | 1 set | A3 steel, anti-corrosion | |
| 3 | Acid regulation tank | 5m3 | 2pcs | PP |
| 4 | Tee flow meter | DN25 | 2pcs | PVC |
| 5 | Concentrated acid pneumatic valve | DN25 | 1 pc | PVC |
| 6 | Pure water pneumatic valve | DN25 | 1 pc | PVC |
| 7 | Diluted acid pneumatic valve | DN25 | 3pcs | PVC |
| 8 | Online density monitor | 1.1~1.4 | 1 set | |
| 9 | Overhead Pure Water Tank | 5m3 | 1pc | PE |
| 10 | Overhead Concentrated Acid Tank | 3m3 | 1pc | PE thickened |
| 11 | Overhead Diluted Acid Tank | 5m3 | 3pcs | PE thickened |
| 12 | Circulating magnetic drive pump | Q=15m3/h, H=15m | 2pcs | PVDF |
| 13 | Temperature control equipment | PT-100 | 3 sets | |
| 14 | Liquid level sensor | High level limit and interlock alarm | 3 sets | |
| 15 | Acid mixing system piping and valve | 1 set | ||
| 16 | Cooling tower | 50m3/h | 1pc | FRP |
| 17 | Cooling circulation pump | 50m3/h, range: 18m | 2pcs | |
| 18 | Pipe and valve for cooling system | 1 set | ||
| 19 | Electronic control cabinet | PLC, HMI | 1 set |
Remark:
- This above excludes the concentrated acid storage, and the corresponding civil construction.
- The diluted acid after acid dilution is about 40ºC
Automatic Acid Cooling System (1.5m3/h)
| No. | Name | Specification | Qty. | Remark |
| 1 | Air cooling water chiller | 15P | 1 set | |
| 2 | Cooling water buffer storage tank | 0.5m3 | 1pc | PP/ heat presentation |
| 3 | Cooling water circulating pump | 12.5m3/h, 2.2kw | 1pc | |
| 4 | Plate-type heat exchanger | 1.6m2 | 1pc | |
| 5 | Valve control box | Q=15m3/h, H=15m | 1pc | PP |
| 6 | Pneumatic ball valve | DN40 | 8 pcs | |
| 7 | Insulation acid storage tank | 5m3 | 2pcs | PP/ heat presentation |
| 8 | Circulating magnetic pump | |||
| 9 | temperature control device | PT-100 | 2 sets | |
| 10 | Liquid level sensor | High level limit and interlock alarm | 2 sets | PP |
| 11 | Control cabinet | PLC+touch screen | 1 set | |
| 12 | Pipe, valve and auxiliary materials inside the system | 1 set |
Why choose us
BETTER has developed into an innovative enterprise to provide general contracting system integration services, including R&D and design, project planning, complete equipment, installation and commissioning, technical output,technical training, after-sales guarantee and so on. We has created"China's First Station" and became the "Purchasing Center in China" for many international customers. BETTER took the lead in putting forward the concept of battery industry full-resource operation, and thoroughly solved problems including the long project construction period, heavy technical communication task, unreasonable production line matching, and cumbersome business communication arising from purchasing from multiple sources by customers.
Service Project
1. Battery manufacturing equipment and turn-key solutions for complete sets of equipment,
2. Battery factory designs, battery product designs and tooling,
3. Battery manufacturing technology support and Transfer,
4. Production management guidance & consultancy for battery manufacturers,
5. Battery manufacturing related accessories, raw materials, chemicals,
6. On-site Battery Production Guidance & Consultancy.
Service Standards
Nice Performance , Nice Price , Free Planning , Pleasant: Never Say "No",
they constitute 4P service standards for the global battery manufacturing industry established by BETTER.
Packing & Delivery
Packing:Wooden case, export standard package
Delivery Time:Delivery in 30 days after receipt of advance payment.
2022 Exhibition
Team Style
Colorful team activities
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Company Profile
Better Technology Group Limited (hereinafter referred to as Better Group) is a battery manufacturing solution service provider and full resource operator positioned in the global business development.
Better Group owns BETTER and WELLPACK brands which respectively engages in the products of lead-acid battery and lithium battery to create a professional connection between the entire industrial chain of lead-acid battery and lithium battery. We have more than 30 years of experience in battery manufacturing and machinery manufacturing.In the lead-acid battery sector, Better Group is the first to put forward the entire industrial chain operation of battery industry, and focuses on providing global clients with R&D design, project planning, complete sets of equipment, installation and commissioning, technology output, technical training, after-sales support and other battery manufacturing project general contracting system technology service services. In the lithium-ion battery sector, Better Group focuses on the R&D, production and technology integration service of advanced battery energy storage system. The application scope covers fields like outdoor portable energy storage, home energy storage, centralized and distributed energy storage system for industrial and commercial and power stations, PV Storage & EV Charging integrated application solution.
Better Group has passed the ISO9001 quality system certification and which is also implementation and revision unit of the battery manufacturing 4P service standard. At present,Better Group has obtained nearly 100 self-developed patented inventions authorized by the CNIP (China National Intellectual Property Administration).Better Group operates in nearly 100 countries and regions.
