Audited Supplier
ODMT Air Driven Air Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.
The ODMT air pump is suitable for working environments where the pressure of the original compressed air system needs to be increased. It can increase the air pressure of the working system to 2 to 5 times, and finally use the compressed air inside the working system as the air source. This pump is suitable for single air source. The materials of the pump body are all made of stainless steel and stainless steel, and they are all sealed with top-grade imported products and can work continuously for a long time. It has the characteristics of reliable structure, power supply, simple maintenance and long life. It is widely used in tightness testing of various small household appliances, air pressure and pressure holding of pneumatic fixtures, sealing testing of hot runners and bottle blowing watches in the injection molding industry, purging of laser cutting machines, air source pressure of CNC machine tools, etc.
GAB-Series
The air booster pump is a piston-type booster pump that uses compressed air as its power source. When air is intake, the spool of the booster air control valve switches back and forth to control the piston of the booster pump to reciprocate at an extremely fast speed. As the output pressure increases, the reciprocating speed of the piston slows down until it stops. At this time, the pressure output by the booster pump is constant, the energy consumption is lowest, and each component stops working; no matter what reason causes the pressure in the pressure maintaining circuit to drop, the booster pump It will start automatically to supplement the leakage pressure and keep the circuit pressure constant.
| Model | GAB02 | Model | GAB05 |
| Pressure ratio | 1:2 | Pressure ratio | 1:2 |
| Actuating pressure(bar) | 1-8 | Actuating pressure(bar) | 1-8 |
| Driver interface size | ZG1/2 | Driver interface size | ZG1/2 |
| Inlet connection size | ZG1/2 | Inlet connection size | ZG1/2 |
| Outlet connection size | ZG1/2 | Outlet connection size | ZG1/2 |
| Maximum output pressure(bar) | 16 | Maximum output pressure(bar) | 40 |
| Maximum output flow rate(NL/min) | 1100(When the inlet pressure is 6 bar) | 350Maximum output flow rate(NL/min) | 350(When the inlet pressure is 6 bar) |
1. Easy to use: No power supply is required. Compressed air is used as the power source to supercharge the compressed air, which can increase the pressure of the workshop air supply system and make the outlet pressure reach 2-5 times the inlet pressure. The boost ratio is 2:1. 4:1, 5:1. By adjusting the inlet pressure, the required pressure can be easily obtained.
2. Automatic pressure maintenance: When the outlet pressure reaches the preset pressure value, the air booster pump automatically stops working to save energy; when the outlet pressure is lower than the preset pressure value, the air booster pump automatically replenishes the pressure to keep the pressure constant and replenish the pressure. No additional energy consumption, environmental protection and energy saving.
3. Operational safety: It adopts pneumatic drive, no arc and sparks, and is suitable for flammable and explosive gases and occasions.
4. Novel appearance: This product has the characteristics of compact and novel structure, smooth operation and extremely high frequency of gas use.
ODMT air driven air amplifiers can be applied in air-pressured system when it needs to amplify the pressure. Theseamplifiers can increase the air pressure to 2-5times. The compressed air in the working system is the air source.This kind of pump is suitable for single air source pressurization.
Maximum working pressure up to 40 bar
Maximum volume: 1,350L/min
When the set pressure is reached, no additional energy consumption
No power supply required (can be used in areas requiring explosion protection)
GAB02/05 air booster pump This series of pump uses single pneumatic non-equilibriurgas distributing valves to move to and fro automaticallyThe drive parts of the pump are made of aluminum alloy ostainless steel. The full set of sealing parts is imported.The maximum drive pressure is 10bar. We suggestcustomers use air pressure<8bar to ensure long lifespanof the pump.
The diameter of the drive piston is 160mm. This pump issingle acting. The pump heads can cool the exhaust air.
Key features include:
- Compressed Air driven - no electricity required (connect to normal air compressor)
- In order to extend the lifetime of the pump, the driving air pressure should
- No airline lubricator required
- Hydrocarbon free - separation between air and gas sections
- Pressures to 80Mpa (11,600 psi)
- Wide range of models with different ratios
- Built-in-cooling on most models
- Easy to install, operate and maintain
- Best price / performance ratio
- No heat, flame or spark risk and explosion proof
- Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant
- Applicable gas: Argon/Helium/Hydrogen/Oxygen/NO2/CH4/LNG/LPG/CNG/FM200 etc.
MAB series pumps are double acting, with single air driven heads type.
- MAB pumps are available with high quality seals, which provide significantly better service life
- single pump heads with exhaust cooling devices.
- All components in contact with the gas are made of stainless steel.
- Pipes mounting way are available as customized.
How to Select ODMT Air Driven Gas Boosters/Systems?
In order to choose suitable booster pump or systems for you,
please kindly reply us the following questions:
1.What is your present gas pressure?( )bar
2.What is your gas?oxygen gas,nitrogen gas or other gases?
3.What outlet gas pressure do you want?( )bar
4.What driven air pressure (of your air compressor) can you offer?( )bar,
because our booster is completely air operated and no need any electricity
5.What outlet gas flow rate do you need?( )L/min
1. The two-stage pressurization of the factory air system can easily solve the problem of insufficient pressure of the compressed air source in the factory. The air pressure can be pressurized from 1-8KG to 2-40KG to ensure stable operation of production gas.
2. Pressure resistance and air tightness testing of radiators, cooling pipes, valves, pressure vessels, pipelines and other products, as well as other occasions requiring higher air pressure, to meet the demand for high air pressure in pressure-bearing equipment.
3. Pneumatic clamps, molds, heat flow tubes, robotic arms, CNC pneumatic clamping heads, cylinders, bottle blowing machines, laser cutting machines, argon arc welding machines, brewery packaging equipment, carbon dioxide shielded welding machines, brewery air control valves, It has the function of pressurizing and stabilizing the insufficient pressure of various pneumatic equipment such as three-dimensional coordinate measuring machines, purging machines, CNC machining centers, electronics factories, machinery factories, and woolen mills.
4. Testing of high-pressure gas systems and instruments.
Q1. Where is your factory located ? How can I visit there?
Q2 : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
Q3. How long can be finished the goods ?
A : Sample order : within one week ;
Large order : 15-25 days ; According to your purchase quantity.
Q4. At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q5 : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
Q6: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
