DTAM D19-V radar-video fusion microwave detector is a traffic sensing device independently developed by our company. It has the characteristics of wide detection range, high detection accuracy, and stable detection performance. It can cover 6 lanes in both directions and has a maximum detection length of 200 meters. The radar uses the industry's most advanced traffic target tracking algorithm, which can achieve real-time identification and accurate tracking of 128 targets in the area. Even in high-density, low-speed environments, it can still maintain excellent detection results. This is a highly integrated radar and video device, which is used to distinguish and identify motor vehicles, non-motor vehicles, and pedestrians in real time, and can realize the fusion display of target information identified by radar and video.
Radar parameters:
No | Specifications | Parameters |
1 | Operating frequency | 80GHz |
2 | Detection range | 6 lanes in both directions; 200m in longitudinal direction |
3 | FOV | Near beam 70° (horizontal)/20° (vertical) Far beam 20° (horizontal)/12° (vertical) |
4 | Range of Speed Coverage | -100km/h~+100 km/h |
5 | Max number of detected targets | 128 |
6 | Max number of detection sections | 4 |
7 | Operating temperature | -40ºC~70ºC |
8 | Operating voltage | DC 24V(Wide voltage range: 16~36V) |
9 | Operating humidity | 0~95% |
10 | Power consumption | ≤10W |
11 | Installation height | 6~8 meters |
Video parameters:
No | Specifications | Parameters |
1 | Sensor | 1/2.8 inch CMOS |
2 | lens | 12mm fixed focus lens |
3 | Pixel | 500W |
4 | Video FOV | 26° |
5 | Image format | JPEG |
6 | Video protocol | Supports docking with ONVIF protocol and national standard G28181 protocol |
7 | Network protocols | Supports TCP/IP, HTTP, DNS, RTP, RTSP and FTP transfer |
8 | Mini illumination | Color 0.1Lux@(F1.2,AGC ON) Black and white0.01Lux @(F1.2,AGC ON) |
9 | Max resolution | 2592*1944 |
10 | Compression standards | H.265/H.264/MJPEG |
11 | Video frame rate | Mainstream:2592*1944 2560*1440 1920*1080 1-20 fps Sub-stream: 1280*720 704*576 640*480 352*288 1-20 fps |
12 | Output bit rate | 16kbps~20Mbps adjustable |
13 | Structured attributes | Supports license plate recognition, including license plate color recognition, license plate type recognition, license plate number recognition, supports 10 Arabic numerals "0-9"; 26 English characters "A-Z"; recognition of Chinese character abbreviations for provinces and municipalities; Chinese character recognition for license plate classification; Supports vehicle type recognition, including cars, vans, light buses, medium buses, large buses, buses, mini trucks, light trucks, medium trucks, large trucks, heavy trucks, forklifts, etc.; supports vehicles color recognition. |
Installation and deployment diagram
- The detector adopts two-dimensional active scanning array radar microwave detection technology. The microwave signal can reliably detect dynamic or static targets in each lane on the road at a scanning frequency of 10 times per second along the emission direction;
- It can detect large areas, with a normal detection area of up to 200 meters along the direction of the oncoming vehicle, and can detect up to 6 lanes in both directions at the same time;
- It can track and detect up to 128 targets simultaneously;
- The detector adopts a "radar + video" integrated design, and the multi-sensor fusion mode can support multi-target radar tracking, video forensics, coordinate matching, and data fusion functions.
- The detector can detect the presence information of vehicles passing through the virtual loop of each lane, and can display the departure signal of the vehicle when it leaves through the host computer software. When the vehicle is stationary, it can continuously and stably maintain the presence signal;
- The detector can detect and make statistics on traffic information by lane or detection section, including traffic volume, average speed, time occupancy, headway, vehicle headway, and 85% speed;
- Detector detection accuracy: stop line flow detection accuracy ≥95%; flow detection accuracy 30 meters after the stop line ≥90%; stop line presence detection accuracy ≥95%; queuing accuracy ≥90%; time occupancy accuracy ≥85%;
- The detector supports upright installation, and can conveniently use existing poles, with an installation height of 6 to 8 meters;
- Detector scanning interval: 100ms, statistical period: configurable in the range of 1 to 3600 seconds;
- Remote debugging and upgrading can be conveniently performed through the network;
- It can work stably in all climate environments, including rain, snow, fog, haze, strong wind, ice, hail, dust and other severe weather conditions.
DTAM D19-V is a radar product used for small and medium-sized intersections in cities. It is installed on signal light poles or electric poles to detect vehicle real-time data, pulse data, vehicle passing data, statistical data, area data, queue data, and can provide queue overload incident data and provide the data to intersection controller or data platforms.
1 Q:Do you have any discount?
A:Yes, if you buy large QTY, please send us a email, we will give you a big discount.
2 Q:What's the delivery time?
A:According to the specification and quantity of your order, generally 10-15 days for normal
standard products within 500pcs.
3 Q:Do you have overseas distributor?
A:Yes,we have distributors in United States, Canada, Russia, Belarus, Brazil, South Korea and so on.
4 Q:Can we use our logo on the products?
A:Yes.We can provide ODM/OEM and sign a licensing agreement.
5 Q:Are you manufacturer or trading company?
A:We are manufacturer with more than 13 years of experience. Our factory headquarters is in Nanjing, China. Welcome to visit our company.
6 Q:Do you have any certification?
A:Yes,according to the different products,overpass CE, FCC, RoHS, ISO, etc,we can offer certificates.
7 Q:What's the means of transport?
A:Express such as Fedex, DHL,UPS, or logistics by indicator.